Dayton Audio UM18-22 18" Ultimax
Dayton Audio UM18-22 18" Ultimax DVC Subwoofer 2 ohms Per Coil Dayton Audio’s Ultimax Series DVC subwoofers are purpose-built to move tons of air and create clean, articulate, fast bass. Experience the apex of subwoofer design! Key Features 18" design for enormous air movement Over 2" of total cone travel! 1000 watts RMS power handling Dual mirror-imaged linear spiders ensure distortion-free excursion Dual 2 ohm, 2-layer copper voice coils Large vented pole piece and under-spider venting Dayton Audio UM18-22 18" Ultimax DVC Subwoofer 2 ohms Per Coil If you want outrageous amounts of bass, you gotta move some air With the UM18-22 Ultimax 18" driver, Dayton Audio has taken everything about the respected Dayton Audio Ultimax subwoofers to the extreme! Providing over 2" of peak-to-peak excursion, the Ultimax 18 sweeps over six liters of air with each stroke! Truly not for the faint of heart! An audio bulldozer with the finesse of a sports car Like the rest of the Ultimax series, the UM18-22 plays it clean, low, fast, and LOUD. Designed to excel in either sealed or vented enclosures, it features an ultra-powerful triple stack of high-grade ferrite ceramic magnets for ultra-high force and exceptional control, plus dual aluminum shorting rings above and below the magnetic gap for minimized inductance, "faster"-sounding bass response, and perfect magnetic symmetry. The voice coil diameter has been increased to 3 inches, for even more thermal dissipation area that allows the 18" model to withstand 1,000 watts of punishing bass power continuously without thermal fatigue. Dual 2-ohm voice coils allow for stereo 2 ohm operation, or mono operation in 1 ohm or 4 ohm configurations, for true design flexibility. Built to produce massive low frequency output and keep on doing it The huge 18" Nomex honeycomb composite curved cone features woven fiberglass outer skins for the ultimate in rigidity and resistance to damage, while the "tall-boy" rubber surround with integral gasket supports extreme stroke with linearity and durability. Dual 8" spiders are mirror-imaged, to keep the 2" of excursion completely linear and provide cancellation of distortion due to compliance asymmetry, for ultra-low mechanical distortion even at the outer limits of travel. And it's all held in perfect alignment by a rigid cast aluminium 12-spoke frame, for stability in any mounting position. Car audio recommended alignments: Sealed 3 cubic ft. (net internal, not including driver) for an f3 of 32 Hz with a Qtc of .78 Vented 4 cubic ft. (net internal, not including driver or vent ) tuned to 22 Hz, with 2 flared vents 4" diameter by 32" long, for an f3 of 24 Hz Home theater/stereo recommended alignments Sealed (home theater/music): 4 cubic ft. (net internal, not including driver) for an f3 of 31 Hz, f10 of 18 Hz with a Qtc of 0.72 Sealed (music): 7 cubic ft. (net internal, not including driver) for an f3 of 31 Hz, f10 of 15.8 Hz with a Qtc of 0.62 Vented (home theater): 8 cubic ft. (net internal, not including driver or vent) tuned to 20 Hz, with 3 flared vents 4" diameter by 28.5" long, for an f3 of 18 Hz Vented (infra-sub): 12 cubic ft. (net internal, not including driver or vent) tuned to 15.5 Hz, with 3 flared vents 4" diameter by 32" long, for an f3 of 15 Hz Infinite Baffle: Approved Note: All specifications are derived with voice coils wired in series.
Dayton Audio RSS315HFA-8
Dayton Audio RSS315HFA-8 12” Reference HF Subwoofer 8 Ohm Dayton Audio's Reference Series RSS315HFA-8 12" subwoofer utilizes the same low-distortion design as the rest of the series, but provides an 8 ohm alternative for increased connection and impedance-loading options. Key Features Extensively vented motor eliminates power compression and allows quiet excursion Lighter-weight black anodized aluminum cone minimizes moving mass 2-layer coil for reduced back EMF Triple shorting-ring motor for ultra-low distortion Optimized for large enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS315HFA-8 12" Reference HF Subwoofer 8 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of the RSS315HFA-8 12" driver is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three magnetic short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose this High Fidelity (HF) version for home speaker systems when your priority is clean, low bass and you are not restricted by cabinet size.
Dayton Audio RSS390HF-4
Dayton Audio RSS390HF-4 15” Reference HF Subwoofer 4 Ohm Engineered to provide high-volume, low-distortion bass in larger rooms and other highly demanding applications, the Dayton Audio RSS390HF-4 15" Reference Series subwoofer speaker offers the perfect combination of high definition sound quality and low frequency impact. Key Features Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Suitable for sealed or vented enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS390HF-4 15" Reference HF Subwoofer 4 Ohm The Dayton Audio Reference Series RSS390HF-4 15" speakers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three magnetic short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
GRS 12SW-4HE 12" Lang-Hub Subwoofer 4 Ohm
The versatile 12SW-4HE 12” high excursion subwoofer from GRS is designed to produce excellent low frequency extension in a variety of designs. Suitable for both sealed and vented enclosures, this driver the ideal replacement or upgrade for your existing subwoofers with worn out or blown drivers. Featuring extensive venting, rubber surround, high temperature voice coil, low Fs, and 12.5 mm of excursion the 12SW-4HE is built for remarkable bass response on a budget.Key Features High excursion and low Fs to produce powerful low frequency output 4-layer 2” voice coil on a thick aluminum former to handle up to 250 watts RMS Venting under the spider, through the pole piece, and in the magnetic gap for excellent heat dissipation Durable reinforced paper cone with rubber surround produces reliable and consistent performance Extended frame and bumped back plate allow ample clearance for high excursion Engineered for extended low frequency response and flexibility, the 12SW-4HE 12” high excursion subwoofer from GRS is an ideal replacement driver for existing subwoofer systems or an excellent choice for new economical designs. Capable of producing powerful bass response in both sealed and vented designs, the 12SW-4HE is suitable as a drop-in replacement for most existing 12” subwoofers. The rigid paper cone is supported by a large diameter spider and rubber surround to keep excursion linear while providing reliable performance. An extended frame and bumped back plate allow ample mechanical clearance to avoid damage when driven to high excursion. With a high temperature 2” voice coil wound on a thick aluminum former the 12SW-4HE can comfortably handle up Der 12SW-4HE 12-Zoll-Subwoofer mit großer Auslenkung von GRS ist ein idealer Ersatztreiber für bestehende Subwoofersysteme oder eine ausgezeichnete Wahl für neue wirtschaftliche Designs. Der 12SW-4HE ist in der Lage, sowohl in geschlossenen als auch in belüfteten Ausführungen eine kraftvolle Basswiedergabe zu erzeugen und eignet sich als Ersatz für die meisten vorhandenen 12"-Subwoofer. Die starre Papiermembran wird von einer Spinne mit großem Durchmesser und einer Gummisicke unterstützt, um die Auslenkung linear zu halten und eine zuverlässige Leistung zu gewährleisten. Ein verlängerter Korb und eine ausgestellte Rückplatte bieten ausreichend mechanischen Spielraum, um Beschädigungen bei hohen Auslenkungen zu vermeiden. Mit einer hochtemperaturfesten 2-Zoll-Schwingspule, die auf einen dicken Aluminiumträger gewickelt ist, kann der 12SW-4HE bequem eine Leistung von bis zu 250 Watt RMS verarbeiten. Umfangreiche Belüftungsöffnungen im Rahmen, Polschuh und Magnetspalt leiten überschüssige Wärme ab, um die Leistungskompression auf ein Minimum zu beschränken, selbst wenn der Lautsprecher über einen längeren Zeitraum hinweg hart betrieben wird. Der GRS 12SW-4HE verfügt über eine unglaubliche Tieftonerweiterung und ist der perfekte Lautsprecher für echte Bässe zu einem günstigen Preis.
Dayton Audio UM12-22 12" Ultimax
Dayton Audio UM12-22 12" Ultimax DVC Subwoofer 2 ohms Per Coil Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design. Key Features Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area 600 watts RMS power handling Copper shorting rings and cap reduce distortion due to inductance variations Dual 2 ohm, 2-layer copper voice coils Large vented pole piece and under-spider venting Black anodized aluminum former and black pole improves heat dissipation Dayton Audio UM12-22 12" Ultimax DVC Subwoofer 2 ohms Per Coil If you want outrageous amounts of bass, you gotta move some air The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass. The versatility you need for mobile, home, or pro subwoofer excellence Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility. Built to produce massive low frequency output and keep on doing it To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils. Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation. A strong motor takes you to wherever you want to be A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures.
Dayton Audio HTS545HE-4 Kraken
Dayton Audio HTS545HE-4 Kraken 21” High Excursion Subwoofer with 5” Voice Coil 4 Ohm Dayton Audio's HTS545HE-4 21" Kraken high output home theater subwoofer is built for the deepest bass, maximum SPL, and low distortion. Appropriately named the Kraken, this beast of a driver is capable of moving extreme amounts of air with outstanding control and power. With a potent ferrite motor, 5" voice coil, rigid treated paper cone, dual spiders, rugged cast aluminum frame, 95.6 dB sensitivity, and 42 mm of peak-to-peak excursion this driver will seriously shake your home theater to its foundation. The Kraken is the master of the deep! Key Features Massive 5" inside/outside wound voice coil for extreme power handling and incredible control 21 mm of excursion with minimal loss of motor force allows incredible displacement capability True dual spider design with ample spacing to keep excursion linear with low distortion Reinforced treated paper cone keeps unwanted resonances under control Aluminum shorting sleeve for minimal distortion when driven to extreme levels Unique over-excursion protection system warns you just before catastrophic failure Dayton Audio HTS545HE-4 Kraken 21" High Excursion Subwoofer with 5" Voice Coil 4 Ohm It takes a monster to deliver serious bass response You need to move a lot of air for high SPL and deep bass response, and Dayton Audio's HTS545HE-4 21" Kraken home theater subwoofer driver can beat most high output subwoofers in the industry. This massive driver is capable of 21 mm of excursion in each direction (@ 70% BL, Klippel verified) giving it the ability to move over 7 liters of displacement with each stroke. Displacement isn't all you need for maximum output; power handling and efficiency are also necessary. Capable of handling 2,000 watts RMS and with over 95 dB sensitivity, the HTS545HE-4 has what it takes to deliver ultra-low frequency response with authority. Dayton Audio has released the Kraken to bring you true high output, low frequency bliss. Know when to say when with Over-Excursion Protection Although the Dayton Audio HTS545HE-4 21" is designed to produce incredibly low frequencies at phenomenal output for extended periods of time, we understand that subwoofers are frequently driven up to and beyond their published limits and we expect that this driver will be no exception. All too often subwoofers fail prematurely due to being over driven, so to minimize this from happening and to extend its life Dayton Audio implemented an OEP (Over-Excursion Protection) system which audibly alerts the user just before catastrophic failure occurs. The Dayton Audio's HTS545HE-4 is purposely built to provide years of the powerful bass you crave. Extreme power, but also control and accuracy Powering the Dayton Audio HTS545HE-4 is an advanced high energy double stacked ferrite motor assembly. Unlike neodymium magnets, the powerful ferrite magnets are capable of delivering a constant motor force even when exposed to high heat to keep power compression at a minimum. Its 5" inside/outside wound voice coil uses a fiberglass former that can withstand extreme temperatures to handle up to 2,000 watts RMS without issue. A large pole piece vent, 6 peripheral gap vents, and numerous vents between the frame and top plate allow plenty of air to move across the voice coil, further reducing power compression caused by increased resistance due to heat. To keep distortion to a minimum at high output, the pole piece also includes a large aluminum shorting sleeve. All of this gives the HTS545HE-4 the ability to deliver predictable and consistent low frequency output even when driven to extreme SPL levels for extended periods. In addition, most high excursion subwoofer drivers suffer from lower midbass response and tend to lack impact and punch, the HTS545HE-4 has the motor strength to produce unbelievable midband efficiency, control, and output which eliminates the need for additional midbass systems in large home theaters. Built to last a lifetime Dayton Audio built the HTS545HE-4 to take the continuous output necessary to accurately reproduce today's demanding movie soundtracks. The naturally damped treated paper cone is optimized and reinforced to handle the stress of exceptionally high excursion while maintaining its shape. To keep the cone under control, the HTS545HE-4 uses dual large diameter spiders with ample spacing to provide extreme linearity. A huge SBR foam surround is double stitched to the cone to allow for incredible linear excursion, even when driven to its limits and beyond. Holding everything together is a rugged cast aluminum frame that will not restrict airflow, and includes integrated push button wire terminals for a reliable and secure electrical connection. The HTS545HE-4 has been built to deliver years of worry-free performance. Beware the power and impact of the Kraken If you're looking for one of the highest output ultra-low frequency drivers in the industry, the Dayton Audio HTS545HE-4 is an unbeatable value. This versatile driver is a great choice for vented designs, back loaded horns, and even tapped horns. With a 4 ohm voice coil this driver is also perfect for use in dual and quad driver systems for the ultimate in extended low frequency output capability. A true monster of a driver, Dayton Audio's Kraken comes from the abyss to take you down into the depths. Note: Please be sure to secure everything in your house before you release the Kraken.
Dayton Audio DCS165-4
DCS165-4 6-1/2" Classic Subwoofer 4 Ohm Capable of impressive low end when installed in enclosures of less than 0.5 cubic feet, the DCS165-4 6-1/2" subwoofer from Dayton Audio's Classic Series is the perfect low cost solution for compact low frequency designs. Key Features 4-layer VC with polyimide former allows high power handling Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression Copper pole piece cap minimizes inductance Rigid non-pressed treated paper/Kevlar cone with rubber surround Great for home and automotive applications Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm If you want outrageous amounts of bass, you gotta move some air Dayton Audio's rugged DCS165-4 6-1/2" subwoofer has all of the performance-enhancing attributes you would expect from a larger high-output subwoofer. With a vented pole piece and 4 ohm, 4-layer voice coil, this driver can handle up 100 watt RMS. The non-pressed paper cone is reinforced with Kevlar to increase stiffness, which promotes linear travel through the limits of its excursion. In addition, the pole piece includes a copper cap that keeps inductance to a minimum. The DCS165-4 driver is ideal for use in small multimedia speakers, portable speakers, or even automotive systems where space is at a minimum.
Dayton Audio MX15-22 Subwoofer
Dayton Audio MX15-22 15" Max-X High Excursion DVC Subwoofer 2 Ohms Per Coil Massive subwoofer driver with double voice coil Dayton Audio's MX-15-22 delivers the ultimate in deep bass with tremendous punch, swallowing up to four figures of amplifier power in the process Hobby HiFi 6/2022 The Max-X MX15-22 15" dual voice coil high excursion subwoofer from Dayton Audio is built for incredible low frequency extension and high SPL. This affordable driver combines durability, efficiency, and maximum displacement into a great looking speaker that will deliver the deepest bass with power and authority. Optimized for use in compact enclosures this driver is ideal for home subwoofer designs and high impact car audio systems. Key Features ±24 mm Klippel verified excursion and maximized surface area for excellent displacement capability Seamless dish cone is extremely rigid and durable with a sleek and modern look Custom tooled surround allows long throw while maximizing cone surface area Extensive venting cools the voice coil enabling high power handling with low power compression Dual spiders maintain linear excursion for lower distortion even when pushed to the limit The dual 2 ohm voice coils give you the ability to get the most out of any amplifier Dayton Audio MX15-22 15" Max-X High Excursion DVC Subwoofer 2 Ohms Per Coil Designed to produce maximum output for an unbeatable value, Dayton Audio's MX15-22 Max-X 15" dual voice coil subwoofer driver has all of the features and performance you expect from premium subwoofers without the high price tag. Capable of high output low frequency response with remarkably low distortion, the MX15-22 is built for use in compact enclosures making it perfect for both home and car audio sounds systems. With 48 mm of peak to peak excursion capability (Klippel verified at 70% Bl) this driver is capable of moving serious amounts of air. It's about more than just looks Many budget subwoofer drivers look powerful, but just don't offer high performance. When designing the MX15-22, Dayton Audio did everything possible to keep the cost down without sacrificing performance or reliability. A large inverted dust cap completely covers the rigid pulp paper cone to create an extremely stiff layered diaphragm with a sleek and modern look. The narrow but tall custom tooled surround has been optimized to allow high excursion without reducing cone area to ensure maximum displacement with improved efficiency. In addition, the surround actually wraps around to the rear side of the mounting flange for maximum gluing surface area to handle the stress of high excursion without issue. To keep the cone linear, the MX15-22 uses dual spiders with ample spacing to make sure there is no rocking even when driven to its limit. Extensive venting to keep everything cool High output subwoofers can generate a lot of heat, excess heat build-up increases temperature which in turn causes resistance to climb. This will lead to lower output, power compression, and premature failure. The MX15-22 has everything it takes to move as much air as possible across the 2-1/2" voice coil to dissipate this excess heat. Six Large diameter vents in the cone combined with a flared pole piece vent creates a continuous flow of air directly through the center of the voice coil. The outside of the coil is cooled by eight under spider vents in the frame and six peripheral gap vents through the back plate. All of this airflow makes sure that power compression is kept to a minimum, but it also gives the MX15-22 extremely quiet operation even at high excursion, nearly eliminating the mechanical noise that is all to common with many of today's subwoofer drivers. A powerful motor for incredible flexibility Another common problem with many of today's budget subwoofer drivers is a lack of motor strength. This leads to drivers that are inefficient or are only capable of the "one note" bass that is the result of high Q drivers. The massive dual stacked high energy ferrite magnets have been optimized to drive the 2-1/2" voice coil efficiently with accuracy and precision. Also, the magnetic gap has been kept narrow to guarantee that there is as little loss of magnetic force as possible. This powerful motor assembly gives the MX15-22 an impressive Bl of 20.6 T/m with a Qts of 0.4, making it suitable for use in compact sealed or vented enclosures with excellent low frequency extension. Finally, with dual 2 ohm voice coils, the MX15-22 can be used in a number of configurations to make sure that you get maximum performance from your amplifier in almost any application. In most home audio designs the coils will be wired in series for a 4 ohm load. When used in car audio systems you have the option of running the coils separately for a dual 2 ohm load, or wired in parallel at 1 ohm to get the most power out of today's high current amplifiers. Maximum value to performance ratio Thanks to extensive optimization and advanced design, the Dayton Audio MX15-22 is a low-cost high-performance subwoofer that truly delivers incredible output capability and low distortion from compact designs. The Max-X drivers the perfect choice for building a powerful home stereo speaker, high SPL mobile audio system, or a sound quality based car audio system without breaking the bank. Note: All specifications measured with the voice coils wired in series for a 4 ohm load.
Dayton Audio DC380-8
Dayton Audio DC380-8 15" Classic Woofer The Dayton Audio Classic Series 15" woofer is excellent as a replacement driver or for new system design and construction. The versatile set of parameters makes it suitable for sealed or vented enclosure designs. Key Features Treated paper cone provides smooth response and low energy storage Aluminum former, vented pole piece, and porous dustcap for high power handling Large diameter flat spider and healthy Xmax for clean bass Bring those old vintage speakers back to life Dayton Audio DC380-8 15" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC380-8 15" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.35 allows the DC300-8 to work well in both sealed and ported speaker enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
RedCatt OBW 15
Ultimativer Open-Baffle-Tieftöner mit 897 cm² Membranfläche und 95 dB Wirkungsgrad. Auch für Wandeinbau, bestens geeignet. Der REDCATT OBW 15 trägt den Zusatz „OBW“ weil er ein ausgesprochenes Open Baffle Chassis ist. Natürlich kann man ihn auch in große Gehäuse einbauen, die dann aber leicht Schrankwandgröße erreichen würden. Bis 500 Hz verhält er sich ideal, mit einer mittleren Abweichung von +/- 1.09 dB. Der REDCATT OBW 15 ist der ideale Partner für „Extrem-Hochtöner“ z.B. einem 2″ Treiber und einem 21″ Kugelwellenhorn. Besonders zu empfehlen sind Kombination mit Breitbandchassis oder Koaxialchassis ab ca. 6″ Technische Daten Außendurchmesser: mm Einbaudurchmesser: mm Membranfläche SD: 897 cm² Resonanzfrequenz Fs: 43 Hz DC-Widerstand Rdc: 6.18 Ohm Mechanische Güte Qms: 6.518 Elektrische Güte Qes: 0.765 Gesamtgüte Qts: 0.685 Effektive bewegte Masse Mms: 94.8 gr. Äquiv. Luftvolumen Vas: 149.24 dm³ Kraftfaktor BL: 14.38 N/A Wirkungsgrad Eta: 94.92 dB (1m, Halbraum)
Dayton Audio RSS315HF-4
Dayton Audio RSS315HF-4 12” Reference HF Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofer speakers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Key Features Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Suitable for sealed or vented enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS315HF-4 12" Reference HF Subwoofer 4 Ohm As with the rest of the Dayton Audio Reference Series speakers, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion for the Reference Series RSS315HF-4 12" subwoofer speaker. The black anodized cone, rubber surround, and custom basket give this driver and the rest of the Reference Series a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Dayton Audio UMII15-22 Ultimax II
Wir präsentieren den UMII5-22 Ultimax II 15" Kohlefaser-Membran Subwoofer von Dayton Audio. Aufbauend auf dem Erfolg ihres Vorgängers wurden diese Subwoofer sorgfältig entwickelt, um alle Erwartungen zu übertreffen. Mit verbesserter Auslenkungsfähigkeit, geringerer Verzerrung, höherer Belastbarkeit, besserer Effizienz und erhöhter Leistung heben die neue Ultimax II Generation Subwoofer und Ihr Audioerlebnis auf neue Tiefenton Erfahrungen. Tauchen Sie ein in satte, drückende Bässe, die Sie bis ins Mark erschüttern werden. Dayton Audio definiert mit dem UMII5-22 Subwoofer weiterhin die Grenzen der Exzellenz neu. Hauptmerkmale Eine große Aluminium-Kurzschlusskappe helfen, die Induktivität linear zu halten, um minimale Verzerrungen zu garantieren. Die starre und dennoch leichte gewebte Carbonfaser Membran liefert eine schnelle, detaillierte und genaue Reaktion. Mit ±24 mm xmax können Sie eine kraftvolle und tiefe Bassreaktion erwarten, die Ihr Audioerlebnis auf die nächste Stufe hebt. Ausgestattet mit einer 4-lagigen 3" flach gewickelten Schwingspule, die bis zu 900 Watt RMS verarbeiten kann. Korb und Antrieb sind umfassend belüftet, was eine effiziente Wärmeableitung für einen gleichmäßigen und zuverlässigen Betrieb gewährleistet und gleichzeitig die Leistungskompression minimiert. Doppelte Spinnen halten die Membranlinearität auch bei extrem hohen Auslenkungspegeln aufrecht und bieten jederzeit eine optimale Audioleistung. Optimiert für kompakte, geschlossene Gehäuse, aber in der Lage, in Bassreflex Designs eine außergewöhnliche Niederfrequenzerweiterung zu erzielen – bietet Ihnen die Freiheit, das perfekte Audio-Setup zu erstellen.
Dayton Audio DC250-8
Dayton Audio DC250-8 10" Classic Woofer Choose the Dayton Audio DC250-8 Classic Series 10" woofer for use as a great replacement speaker for large format 2-way and 3-way, ported or sealed loudspeakers. Key Features Best price/performance value available anywhere Excellent low frequency capabilities Rubber surround and vented pole piece Dayton Audio DC250-8 10" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC250-8 10" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.38 allows the DC300-8 to work well in both sealed and ported speaker enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio UMII18-22 Ultimax II
Wir präsentieren den UMII18-22 Ultimax II 18" Kohlefaser-Membran Subwoofer von Dayton Audio. Aufbauend auf dem Erfolg ihres Vorgängers wurden diese Subwoofer sorgfältig entwickelt, um alle Erwartungen zu übertreffen. Mit verbesserter Auslenkungsfähigkeit, geringerer Verzerrung, höherer Belastbarkeit, besserer Effizienz und erhöhter Leistung heben die neue Ultimax II Generation Subwoofer und Ihr Audioerlebnis auf neue Tiefenton Erfahrungen. Tauchen Sie ein in satte, drückende Bässe, die Sie bis ins Mark erschüttern werden. Dayton Audio definiert mit dem UMII8-22 Subwoofer weiterhin die Grenzen der Exzellenz neu. Hauptmerkmale Eine große Aluminium-Kurzschlusskappe helfen, die Induktivität linear zu halten, um minimale Verzerrungen zu garantieren. Die starre und dennoch leichte gewebte Carbonfaser Membran liefert eine schnelle, detaillierte und genaue Reaktion. Mit ±28 mm xmax können Sie eine kraftvolle und tiefe Bassreaktion erwarten, die Ihr Audioerlebnis auf die nächste Stufe hebt. Ausgestattet mit einer 4-lagigen 3" flach gewickelten Schwingspule, die bis zu 1200 Watt RMS verarbeiten kann. Korb und Antrieb sind umfassend belüftet, was eine effiziente Wärmeableitung für einen gleichmäßigen und zuverlässigen Betrieb gewährleistet und gleichzeitig die Leistungskompression minimiert. Doppelte Spinnen halten die Membranlinearität auch bei extrem hohen Auslenkungspegeln aufrecht und bieten jederzeit eine optimale Audioleistung. Optimiert für kompakte, geschlossene Gehäuse, aber in der Lage, in Bassreflex Designs eine außergewöhnliche Niederfrequenzerweiterung zu erzielen – bietet Ihnen die Freiheit, das perfekte Audio-Setup zu erstellen.
Dayton Audio DC300-8
Dayton Audio DC300-8 12" Classic Woofer Choose the Dayton Audio DC300-8 Classic Series 12" woofer for use as a great replacement speaker for large format 2-way and 3-way, ported or sealed loudspeakers. Key Features Works great as a general replacement woofer Excellent price/performance ratio Bring those old vintage speakers back to life Long lasting rubber surround increases the life of the driver Dayton Audio DC300-8 12" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC300-8 12" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.33 allows the DC300-8 produce incredible low frequency extension in vented enclosures or tight response with a powerful kick in sealed enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio RSS265HF-4
Dayton Audio RSS265HF-4 10” Reference HF Subwoofer 4 Ohm The Dayton Audio RSS265HF-4 10" subwoofer features the high-definition/low-distortion attributes of the acclaimed Reference Series, and provides great results in compact single-driver subwoofer speaker systems...or when used in multiples! Key Features Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Suitable for sealed or vented enclosures Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Highest quality materials throughout for long-lasting performance Dayton Audio RSS265HF-4 10" Reference HF Subwoofer 4 Ohm As with the rest of the Reference Series, the main focus of the Dayton Audio RSS265HF 10" subwoofer is ultra-low distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, thick rubber surround, and custom basket give this Dayton Audio driver a unique, high-end look. Choose the High Fidelity (HF) version for home systems when you are looking for clean, low bass and are not restricted by speaker cabinet size.
Dayton Audio LS10-44
Dayton Audio LS10-44 10" Low Profile Subwoofer Dual 4 Ohm Review by Hobby HiFi Dayton Audio's LS10-44 is an exciting subwoofer driver with a particularly shallow depth and impressive low bass talent with a surprisingly small enclosure volume requirement. surprisingly small enclosure volume. The impulse-compensating design of a slim floorstanding speaker is particularly attractive. of a slim floorstanding speaker without letting its size get out of hand. Bernd Timmermanns At a depth of less than 3.4", Dayton Audio's LS10-44 10" low profile subwoofer fits into shallow spaces that ordinary subs wouldn't dream of attempting! Dual 2" 4 ohm coils provide flexible wiring, while the flat cone and innovative suspension support 10 mm of Xmax! Key Features Innovative low-profile subwoofer – less than 3.4" thick! 10 mm Xmax guarantees uncompromised bass performance Dual 4 ohm voice coils, 6 layers total, for high BL force and multiple wiring options Rigid flat honeycomb fiberglass cone maintains linearity and high impact Low distortion ferrite motor with dual aluminum shorting rings Balanced rubber double-roll surround design improves stability and control Dayton Audio LS10-44 10" Low Profile Subwoofer Dual 4 Ohm Dayton Audio's shallow subwoofers let you put more bass into less space! The new LS10-44 Low Profile Subwoofer from Dayton Audio provides over 10 mm of controlled excursion, for bass that hits hard and goes deep -- even in places ordinary subwoofers just won't fit! These drivers are perfect for installation in walls, floors, and ceilings, or in limited-clearance automotive applications like the narrow space behind pickup truck seats. They might even fit under your chair or behind your sofa! Innovative design makes the shallow form factor of the LS Series low profile subwoofers possible. A flat, rigid piston made of aluminum honeycomb with glass fiber skins replaces the conventional cone of most subwoofers, and a balanced double-roll surround design maximizes the stability of the moving symmetrical motion and minimizes distortion. The LS10-44 also features dual heavy-gauge aluminum shorting rings for low inductance and fast, impactful bass. Lastly, a 6-layer dual voice coil ensures maximum available force from the compact motor, featuring high-grade ceramic ferrite magnetic material, and enables 2 ohm or 8 ohm wiring. Nothing has been sacrificed in creating these truly next-generation shallow subwoofers, capable of over 10 mm of linear excursion from an ultra-slim package. Trust the LS Series subwoofer drivers to deliver years of rugged, long-lasting enjoyment, wherever you install them. Wherever you would like to add more bass, Dayton Audio has you covered. Note: All parameters derived with voice coils wired in series.
Dayton Audio MX12-22
Dayton Audio MX12-22 12" Max-X High Excursion DVC Subwoofer 2 Ohms Per Coil The Max-X MX12-22 12" dual voice coil high excursion subwoofer from Dayton Audio is built for incredible low frequency extension and high SPL. This affordable driver combines durability, efficiency, and maximum displacement into a great looking speaker that will deliver the deepest bass with power and authority. Optimized for use in compact enclosures this driver is ideal for home subwoofer designs and high impact car audio systems. Key Features ±18.8 mm Klippel verified excursion and maximized surface area for excellent displacement capability Seamless dish cone is extremely rigid and durable with a sleek and modern look Custom tooled surround allows long throw while maximizing cone surface area Extensive venting cools the voice coil enabling high power handling with low power compression Dual spiders maintain linear excursion for lower distortion even when pushed to the limit The dual 2 ohm voice coils give you the ability to get the most out of any amplifier Dayton Audio MX12-22 12" Max-X High Excursion DVC Subwoofer 2 Ohms Per Coil Designed to produce maximum output for an unbeatable value, Dayton Audio's MX12-22 Max-X 12" dual voice coil subwoofer driver has all of the features and performance you expect from premium subwoofers without the high price tag. Capable of high output low frequency response with remarkably low distortion, the MX12-22 is built for use in compact enclosures making it perfect for both home and car audio sounds systems. With 37.6 mm of peak to peak excursion capability (Klippel verified at 70% Bl) this driver is capable of moving serious amounts of air. It's about more than just looks Many budget subwoofer drivers look powerful, but just don't offer high performance. When designing the MX12-22, Dayton Audio did everything possible to keep the cost down without sacrificing performance or reliability. A large inverted dust cap completely covers the rigid pulp paper cone to create an extremely stiff layered diaphragm with a sleek and modern look. The narrow but tall custom tooled surround has been optimized to allow high excursion without reducing cone area to ensure maximum displacement with improved efficiency. In addition, the surround actually wraps around to the rear side of the mounting flange for maximum gluing surface area to handle the stress of high excursion without issue. To keep the cone linear, the MX12-22 uses dual spiders with ample spacing to make sure there is no rocking even when driven to its limit. Extensive venting to keep everything cool High output subwoofers can generate a lot of heat, excess heat build-up increases temperature which in turn causes resistance to climb. This will lead to lower output, power compression, and premature failure. The MX12-22 has everything it takes to move as much air as possible across the 2-1/2" voice coil to dissipate this excess heat. Six Large diameter vents in the cone combined with a flared pole piece vent creates a continuous flow of air directly through the center of the voice coil. The outside of the coil is cooled by eight under spider vents in the frame and six peripheral gap vents through the back plate. All of this airflow makes sure that power compression is kept to a minimum, but it also gives the MX12-22 extremely quiet operation even at high excursion, nearly eliminating the mechanical noise that is all to common with many of today's subwoofer drivers. A powerful motor for incredible flexibility Another common problem with many of today's budget subwoofer drivers is a lack of motor strength. This leads to drivers that are inefficient or are only capable of the "one note" bass that is the result of high Q drivers. The massive dual stacked high energy ferrite magnets have been optimized to drive the 2-1/2" voice coil efficiently with accuracy and precision. Also, the magnetic gap has been kept narrow to guarantee that there is as little loss of magnetic force as possible. This powerful motor assembly gives the MX12-22 an impressive Bl of 21.5 T/m with a Qts of 0.35, making it suitable for use in compact sealed or vented enclosures with excellent low frequency extension. Finally, with dual 2 ohm voice coils, the MX12-22 can be used in a number of configurations to make sure that you get maximum performance from your amplifier in almost any application. In most home audio designs the coils will be wired in series for a 4 ohm load. When used in car audio systems you have the option of running the coils separately for a dual 2 ohm load, or wired in parallel at 1 ohm to get the most power out of today's high current amplifiers. Maximum value to performance ratio Thanks to extensive optimization and advanced design, the Dayton Audio MX12-22 is a low-cost high-performance subwoofer that truly delivers incredible output capability and low distortion from compact designs. The Max-X drivers the perfect choice for building a powerful home stereo speaker, high SPL mobile audio system, or a sound quality based car audio system without breaking the bank. Note: All specifications measured with the voice coils wired in series for a 4 ohm load.
Dayton Audio RSS460HO-4
Dayton Audio RSS460HO-4 18” Reference HO Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Key Features Extensively vented motor eliminates compression and allows quiet excursion Extra-thick black anodized aluminum cone for maximum rigidity Triple shorting ring motor for ultra-low distortion 4-layer coil for high power handling Optimized parameters for relatively small enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS460HO-4 18" Reference HO Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
Dayton Audio MX10-22
Dayton Audio MX10-22 10" Max-X High Excursion DVC Subwoofer 2 Ohms Per Coil The Max-X MX10-22 10" dual voice coil high excursion subwoofer from Dayton Audio is built for incredible low frequency extension and high SPL. This affordable driver combines durability, efficiency, and maximum displacement into a great looking speaker that will deliver the deepest bass with power and authority. Optimized for use in compact enclosures this driver is ideal for home subwoofer designs and high impact car audio systems. Key Features ±13.7 mm Klippel verified excursion and maximized surface area for excellent displacement capability Seamless dish cone is extremely rigid and durable with a sleek and modern look Custom tooled surround allows long throw while maximizing cone surface area Extensive venting cools the voice coil enabling high power handling with low power compression Dual spiders maintain linear excursion for lower distortion even when pushed to the limit The dual 2 ohm voice coils give you the ability to get the most out of any amplifier Dayton Audio MX10-22 10" Max-X High Excursion DVC Subwoofer 2 Ohms Per Coil Designed to produce maximum output for an unbeatable value, Dayton Audio's MX10-22 Max-X 10" dual voice coil subwoofer driver has all of the features and performance you expect from premium subwoofers without the high price tag. Capable of high output low frequency response with remarkably low distortion, the MX10-22 is built for use in compact enclosures making it perfect for both home and car audio sounds systems. With 27.4 mm of peak to peak excursion capability (Klippel verified at 70% Bl) this driver is capable of moving serious amounts of air. It's about more than just looks Many budget subwoofer drivers look powerful, but just don't offer high performance. When designing the MX10-22, Dayton Audio did everything possible to keep the cost down without sacrificing performance or reliability. A large inverted dust cap completely covers the rigid pulp paper cone to create an extremely stiff layered diaphragm with a sleek and modern look. The narrow but tall custom tooled surround has been optimized to allow high excursion without reducing cone area to ensure maximum displacement with improved efficiency. In addition, the surround actually wraps around to the rear side of the mounting flange for maximum gluing surface area to handle the stress of high excursion without issue. To keep the cone linear, the MX10-22 uses dual spiders with ample spacing to make sure there is no rocking even when driven to its limit. Extensive venting to keep everything cool High output subwoofers can generate a lot of heat, excess heat build-up increases temperature which in turn causes resistance to climb. This will lead to lower output, power compression, and premature failure. The MX10-22 has everything it takes to move as much air as possible across the 2-1/2" voice coil to dissipate this excess heat. Six Large diameter vents in the cone combined with a flared pole piece vent creates a continuous flow of air directly through the center of the voice coil. The outside of the coil is cooled by eight under spider vents in the frame and six peripheral gap vents through the back plate. All of this airflow makes sure that power compression is kept to a minimum, but it also gives the MX10-22 extremely quiet operation even at high excursion, nearly eliminating the mechanical noise that is all to common with many of today's subwoofer drivers. A powerful motor for incredible flexibility Another common problem with many of today's budget subwoofer drivers is a lack of motor strength. This leads to drivers that are inefficient or are only capable of the "one note" bass that is the result of high Q drivers. The massive dual stacked high energy ferrite magnets have been optimized to drive the 2-1/2" voice coil efficiently with accuracy and precision. Also, the magnetic gap has been kept narrow to guarantee that there is as little loss of magnetic force as possible. This powerful motor assembly gives the MX10-22 an impressive Bl of 18.2 T/m with a Qts of 0.46, making it suitable for use in compact sealed or vented enclosures with excellent low frequency extension. Finally, with dual 2 ohm voice coils, the MX10-22 can be used in a number of configurations to make sure that you get maximum performance from your amplifier in almost any application. In most home audio designs the coils will be wired in series for a 4 ohm load. When used in car audio systems you have the option of running the coils separately for a dual 2 ohm load, or wired in parallel at 1 ohm to get the most power out of today's high current amplifiers. Maximum value to performance ratio Thanks to extensive optimization and advanced design, the Dayton Audio MX10-22 is a low-cost high-performance subwoofer that truly delivers incredible output capability and low distortion from compact designs. The Max-X drivers the perfect choice for building a powerful home stereo speaker, high SPL mobile audio system, or a sound quality based car audio system without breaking the bank. Note: All specifications measured with the voice coils wired in series for a 4 ohm load.
CSS Audio SDX12
The SDX-12 is one of the most formidable subwoofer drivers of our time, and it offers highly remarkable low bass qualities. Measured against this, its price of 440 Euros can be described as extremely reasonable. For the ultimate low bass kick, this is exactly the right transducer.
Dayton Audio UMII10-22 Ultimax II
Wir präsentieren den UMII0-22 Ultimax II 10" Kohlefaser-Membran Subwoofer von Dayton Audio. Aufbauend auf dem Erfolg ihres Vorgängers wurden diese Subwoofer sorgfältig entwickelt, um alle Erwartungen zu übertreffen. Mit verbesserter Auslenkungsfähigkeit, geringerer Verzerrung, höherer Belastbarkeit, besserer Effizienz und erhöhter Leistung heben die neue Ultimax II Generation Subwoofer und Ihr Audioerlebnis auf neue Tiefenton Erfahrungen. Tauchen Sie ein in satte, drückende Bässe, die Sie bis ins Mark erschüttern werden. Dayton Audio definiert mit dem UMII0-22 Subwoofer weiterhin die Grenzen der Exzellenz neu. Hauptmerkmale Eine große Aluminium-Kurzschlusskappe helfen, die Induktivität linear zu halten, um minimale Verzerrungen zu garantieren. Die starre und dennoch leichte gewebte Carbonfaser Membran liefert eine schnelle, detaillierte und genaue Reaktion. Mit ±20 mm xmax können Sie eine kraftvolle und tiefe Bassreaktion erwarten, die Ihr Audioerlebnis auf die nächste Stufe hebt. Ausgestattet mit einer 4-lagigen 2-1/2" flach gewickelten Schwingspule, die bis zu 600 Watt RMS verarbeiten kann. Korb und Antrieb sind umfassend belüftet, was eine effiziente Wärmeableitung für einen gleichmäßigen und zuverlässigen Betrieb gewährleistet und gleichzeitig die Leistungskompression minimiert. Doppelte Spinnen halten die Membranlinearität auch bei extrem hohen Auslenkungspegeln aufrecht und bieten jederzeit eine optimale Audioleistung. Optimiert für kompakte, geschlossene Gehäuse, aber in der Lage, in Bassreflex Designs eine außergewöhnliche Niederfrequenzerweiterung zu erzielen – bietet Ihnen die Freiheit, das perfekte Audio-Setup zu erstellen.
Dayton Audio UMII12-22 Ultimax II
Dayton Audio UMII12-22 Ultimax IIWe present the UMII12-22 Ultimax II 12" Carbon Fiber Cone Subwoofer from Dayton Audio. Building onon the success of their predecessor, these subwoofers have been carefully developed to meet all expectations ofoutperform. With improved excursion capability, lower distortion, higher power handling,better efficiency and increased performance elevate the new Ultimax II generation subwoofers and yourAudio experience with new low-frequency experiences. Immerse yourself in rich, powerful bass that will take you to theMark will be shaken. Dayton Audio continues to define the boundaries of the UMII12-22 subwoofer.Excellence new. Main features A large aluminum short-circuit cap helps to linearlyhold to guarantee minimal distortions. The rigid yet lightweight woven carbon fiberMembrane provides a fast, detailed, and accurate response. With ±22 mm xmax, you can apowerful and deep bass response that elevates your audio experience to the next level.Equipped with a 4-layer 3" flat wound voice coil that can handle up to 800 watts RMScan. The basket and drive are comprehensively ventilated, allowing for efficient heat dissipation for aconsistent and reliable operation ensured while simultaneously performance compressionminimized. Dual spiders maintain membrane linearity even at extremely high excursion levelsand always provide optimal audio performance. Optimized for compact, closed enclosures, but inder Lage, in Bassreflex Designs eine außergewöhnliche Niederfrequenzerweiterung zu erzielen – offersYou the freedom to create the perfect audio setup.
Dayton Audio DCS205-4
Dayton Audio DCS205-4 8" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS205-4 8" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio DCS305-4
Dayton Audio DCS305-4 Dayton's DCS305-4 delivers the ultimate in low bass with supreme level stability down to 20 Hertz. Review Hobby HiFi 1/2022 Dayton Audio DCS305-4 12" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS305-4 12" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio DCS385-4
Dayton Audio DCS385-4 15" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS385-4 15" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio RSS210HF-4
Dayton Audio RSS210HF-4 8” Reference HF Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Key Features Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Suitable for sealed or vented enclosures Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Highest quality materials throughout for long-lasting performance Dayton Audio RSS210HF-4 8" Reference HF Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Dayton Audio UM10-22 10" Ultimax
Dayton Audio UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Coil Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design. Key Features Dual 2 ohm, 2-layer copper voice coils Large vented pole piece and under-spider venting 500 watts RMS power handling Black anodized aluminum former and black pole improves heat dissipation Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area Dual linear stiffness spiders limit distortion and rocking modes Dayton Audio UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Coil If you want outrageous amounts of bass, you gotta move some air The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass. The versatility you need for mobile, home, or pro subwoofer excellence Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility. Built to produce massive low frequency output and keep on doing it To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils. Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation. A strong motor takes you to wherever you want to be A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures. Cabinet recommendations: Sealed 0.63 cubic ft. (net internal), f3 of 45 Hz with a 0.707 Qtc alignment Vented 1.75 cubic ft. (net internal, not including driver or port volume) tuned to 25 Hz with a 10" wide by 1" high slot port that is 24" long, which yields an f3 of 23 Hz Note: All parameters derived with voice coils wired in series.
CSS Audio SDX10
CSS Audio SDX10Exactly like the SDX12, the SDX10 is also powered by a patented XBL² motor, making it part ofthe most precise 25cm (10 inch) long-throw woofers available. With the XBL² motor, the SDX10,exactly like its bigger brother, with extremely low distortion values and thus enables a rarebelonged to clear and nuanced bass reproduction. An Xmax of 36 mm (peak-to-peak) enables above thathinaus maximum dynamic capability. Features Carbon fiber reinforced paper diaphragm for high stiffness and good internal damping properties Semi-progressive centering for better linearity Butyl Rubber Surround Aluminum and copper short-circuit rings for low distortion values and minimal inductance rise Die casting basket High power, XBL² Motor 6-layer 60.6mm voice coil diameter 750W RMS, 1500W Peak thermal load capacity Parameter Fs: 26.0Hz SPL: 89 dB @ 2.83V/1M Nom Imp 4 ohm Re: 3.5 Ohms Mms 112 g BL: 11.8 NA Vas: 53 Liters Qes: 0.47 Qms: 4.0 Qts: 0.42 Le: 1.42 mH Xmax: 18.4 mm Sd: 330 cm²
Dayton Audio PSS555-8
Dayton Audio PSS555-8 21” Pro Subwoofer with 4.5” Voice Coil 8 Ohm For low frequency response with maximum output, Dayton Audio's PSS555-8 21" professional subwoofer is an unbeatable value. This massive driver is capable of incredible displacement with excellent efficiency and power handling. Featuring a 4-1/2" voice coil, powerful ferrite motor, extensive venting, rigid treated paper cone, and rugged cast aluminum frame the PSS555-8 is capable of incredible low frequency response at breathtaking SPL levels. Key Features Large 4-1/2" inside/outside wound voice coil to handle 1,000 watts RMS for extended sessions High energy ferrite motor assembly with extensive venting for minimal power compression Copper shorting ring keeps inductance under control for incredibly low distortion Push button terminals make wire connection easy and extremely secure Rigid cast aluminum frame to withstand the use and abuse of the professional sound environment Capable of 22 mm peak-to-peak excursion with only a 30% loss in BL Dayton Audio PSS555-8 21" Pro Subwoofer with 4.5" Voice Coil 8 Ohm You need to move a lot of air for high SPL bass response, and Dayton Audio's PSS555-8 21" professional subwoofer was built to move as much air as possible for the best value imaginable. This massive driver is capable of 11 mm of excursion in each direction (@ 70% BL, Klippel verified) for nearly 4 liters of displacement with each stroke. Displacement isn't all you need for maximum output; power handling and efficiency are also necessary. Capable of handling 1,000 watts RMS and with over 96 dB sensitivity, the PSS555-8 has what it takes to deliver. This driver is not just about output capability, the advanced and powerful motor is designed to produce incredibly low distortion levels even when driven to its limit for extended periods. Dayton Audio's PSS555-8 is sure to deliver the bass output you crave. Powering the PSS555-8 is an advanced high energy ferrite motor assembly. Unlike neodymium magnets, the powerful ferrite magnet is capable of delivering a constant motor force even when exposed to high heat which helps keep power compression at a minimum. Its 4-1/2" inside/outside wound voice coil uses a fiberglass former that can take enough heat to handle up to 1,000 watts RMS without issue. A large pole piece vent, 6 peripheral gap vents, and numerous vents between the frame and top plate allow plenty of air to move across the voice coil to dissipate excessive heat, further reducing power compression caused by increased resistance due to heat. To control inductance and keep distortion to a minimum, the pole piece also includes a large copper shorting cap. All of this gives the PSS555-8 the ability to deliver predictable and consistent low frequency output even when driven to extreme SPL levels for extended periods. Dayton Audio built the PSS555-8 to take the use and abuse of the harsh professional sound environment. The naturally damped treated paper cone is optimized and reinforced to handle the stress of high excursion while maintaining its shape. To keep the cone under control, the PSS555-8 uses dual large diameter silicone treated spiders and a deep triple-roll accordion surround allowing for linear excursion even when driven to its limits and beyond. Holding everything together is a rugged cast aluminum frame that that will not restrict airflow and includes integrated push button wire terminals for a reliable and secure electrical connection. The PSS555-8 has been built to deliver years of worry free performance. For high output bass response Dayton Audio's PSS555-8 is an unbeatable value. This versatile driver is a great choice for vented designs, back loaded horns, and even tapped horns. With an 8 ohm voice coil this driver is also perfect for use in dual and quad driver systems for the ultimate in output capability.
Dayton Audio DCS255-4
Dayton Audio DCS255-4 10" Classic Subwoofer 4 Ohm Review by Hobby HiFi 1/2023 Dayton Audio's DCS255-4 delivers convincingly deep and extremely stable low bass reproduction from a pleasingly compact bass reflex cabinet. Bernd Timmermanns The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS255-4 10" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio RSS210HO-4
Dayton Audio RSS210HO-4 8” Reference HO Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Key Features Extensively vented motor eliminates compression and allows quiet excursion Extra-thick black anodized aluminum cone for maximum rigidity Triple shorting ring motor for ultra-low distortion 4-layer coil for high power handling Optimized parameters for small enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS210HO-4 8" Reference HO Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed Reference Series woofer line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
Dayton Audio RSS210HO-8
Dayton Audio RSS210HO-8 8” Reference HO Subwoofer 8 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Key Features Extensively vented motor eliminates power compression and allows quiet excursion Triple shorting-ring motor for ultra-low distortion Heavy-gauge aluminum cones withstand pressures of small enclosures 4-layer high-temperature coils for maximum power handling Durable aramid fiber spider for greater mechanical control Unique, high-end look Optimized for small enclosures Dayton Audio RSS210HO-8 8" Reference HO Subwoofer 8 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
Dayton Audio RSS265HF-8
Dayton Audio RSS265HF-8 10” Reference Subwoofer 8 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of the RSS265HF-8 10" subwoofer is ultra-low-distortion. Key Features Extensively vented motor eliminates power compression and allows quiet excursion Lighter-weight black anodized aluminum cone minimizes moving mass 2-layer coil for reduced back EMF Triple shorting-ring motor for ultra-low distortion Optimized for large enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS265HF-8 10" Reference HF Subwoofer 8 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of the RSS265HF-8 10" subwoofer is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose this High Fidelity (HF) version for home speaker systems when your priority is clean, low bass and you are not restricted by cabinet size.
Dayton Audio RSS265HO-4
Dayton Audio RSS265HO-4 10” Reference HO Subwoofer 4 Ohm Built for extreme performance in the smallest 10" subwoofer speaker enclosures, the Dayton Audio Reference Series RSS265HO-4 features an anodized aluminum cone, 4-layer voice coil, and optimized distortion-reducing magnet system. Key Features Extensively vented motor eliminates compression and allows quiet excursion Extra-thick black anodized aluminum cone for maximum rigidity Triple shorting ring motor for ultra-low distortion 4-layer coil for high power handling Optimized parameters for small enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS265HO-4 10" Reference HO Subwoofer 4 Ohm As with the rest of the Reference Series, the main focus of the Dayton Audio RSS265HO-4 10" subwoofer is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this 10" driver a unique, high-end look. Choose the high output version for automotive applications or for equalized high-power home subwoofer speaker systems.
HW321
Voice Coil Diameter 50 mm 2 inContinuous Power Handling 400 WSensitivity 93 dBSurround Shape RubberCone Material Treated Cellulose