Dayton Audio DCS165-4
DCS165-4 6-1/2" Classic Subwoofer 4 Ohm
Capable of impressive low end when installed in enclosures of less than 0.5 cubic feet, the DCS165-4 6-1/2" subwoofer from Dayton Audio's Classic Series is the perfect low cost solution for compact low frequency designs.
Key Features
- 4-layer VC with polyimide former allows high power handling
- Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression
- Copper pole piece cap minimizes inductance
- Rigid non-pressed treated paper/Kevlar cone with rubber surround
- Great for home and automotive applications
Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm
If you want outrageous amounts of bass, you gotta move some air
Dayton Audio's rugged DCS165-4 6-1/2" subwoofer has all of the performance-enhancing attributes you would expect from a larger high-output subwoofer. With a vented pole piece and 4 ohm, 4-layer voice coil, this driver can handle up 100 watt RMS. The non-pressed paper cone is reinforced with Kevlar to increase stiffness, which promotes linear travel through the limits of its excursion. In addition, the pole piece includes a copper cap that keeps inductance to a minimum. The DCS165-4 driver is ideal for use in small multimedia speakers, portable speakers, or even automotive systems where space is at a minimum.
| Artikel-Nr.: | 295-198 |
|---|---|
| Außenmaß: | 166,9mm |
| Bohrlochanzahl: | 8 |
| DC Resistance (Re): | 3,4 Ohm |
| EAN: | 848791001901 |
| Eff. Membranfläche (Sd): | 124,7cm² |
| Effektive Bewegte Masse (Mms): | 39,5g |
| Einbautiefe: | 82,6 mm |
| Einbauöffnung: | 142,7 mm |
| Einheit: | Stück |
| Elektrische Güte (Qes): | 0,36 |
| Frequenzbereich: | 36 bis 1,100Hz |
| Gesamtgüte (Qts): | 0,34 |
| Impedanz (Z): | 4 Ohm |
| Korbmaterial: | Stahl |
| Kraftfaktor (BL): | 9,15T·m |
| Lineare Auslenkung (Xmax): | 6mm |
| Magnet: | Ferrit |
| Marke: | Dayton Audio |
| Mechanische Güte (Qms): | 6,62 |
| Membranmaterial: | Papier / Kevlar |
| Modell: | DCS165-4 |
| Nachgiebigkeit (Cms): | 0,5mm/N |
| Nennbelastbarkeit: | 100 Watt |
| Resonanzfrequenz (fs): | 35,7Hz |
| Schwingspulendurchmesser: | 38,4 mm |
| Schwingspulenind. (Le): | 1,43mH |
| Schwingspulenkörper: | Kapton / Polyimide |
| Schwingspulenmaterial: | Kupfer |
| Sensitivität: | 87,4dB 2,83V/1m |
| Sickenmaterial: | Gummi |
| Äquivalentvolumen (Vas): | 12,1 l. |
Accessory Items
