Dayton Audio UMII12-22 Ultimax II

€299.95*

Content: 1

Prices incl. VAT plus shipping costs

Stück

Product number: 295-712

Manufacturer: Dayton Audio

Weight: 13 kg

Available stock: 2

Min. order quantity: 1

Dayton Audio UMII12-22 Ultimax II

We present the UMII12-22 Ultimax II 12" Carbon Fiber Cone Subwoofer from Dayton Audio. Building on
on the success of their predecessor, these subwoofers have been carefully developed to meet all expectations of
outperform. With improved excursion capability, lower distortion, higher power handling,
better efficiency and increased performance elevate the new Ultimax II generation subwoofers and your
Audio experience with new low-frequency experiences. Immerse yourself in rich, powerful bass that will take you to the
Mark will be shaken. Dayton Audio continues to define the boundaries of the UMII12-22 subwoofer.
Excellence new. Main features A large aluminum short-circuit cap helps to linearly
hold to guarantee minimal distortions. The rigid yet lightweight woven carbon fiber
Membrane provides a fast, detailed, and accurate response. With ±22 mm xmax, you can a
powerful and deep bass response that elevates your audio experience to the next level.
Equipped with a 4-layer 3" flat wound voice coil that can handle up to 800 watts RMS
can. The basket and drive are comprehensively ventilated, allowing for efficient heat dissipation for a
consistent and reliable operation ensured while simultaneously performance compression
minimized. Dual spiders maintain membrane linearity even at extremely high excursion levels
and always provide optimal audio performance. Optimized for compact, closed enclosures, but in
der Lage, in Bassreflex Designs eine außergewöhnliche Niederfrequenzerweiterung zu erzielen – offers
You the freedom to create the perfect audio setup.

Properties

Außenmaß:	321,4mm
Eff. Membranfläche (Sd):	528 cm²
Effektive Bewegte Masse (Mms):	189g
Einbautiefe:	179mm
Einbauöffnung:	286mm
Elektrische Güte (Qes):	0,71
Frequenzbereich:	22-400Hz
Gesamtgüte (Qts):	0,56
Gleichstromwiderstand (Re):	4,2Ω
Größe:	12"
Impedanz (Z):	2x2 Ohm
Kennschalldruck:	88,6dB 2,83V/1m
Korbmaterial:	Leichtmetall Druckguss
Kraftfaktor (BL):	14,8 Tm
Lineare Auslenkung (Xmax):	22 mm
Mechanische Güte (Qms):	2,75
Membranmaterial:	Gewebte Kohlefaser
Nachgiebigkeit (Cms):	0,133mm/N
Nennbelastbarkeit:	800 Watt
Power Handling (MAX):	1600 Watt
Resonanzfrequenz (fs):	31Hz
Schwingspulendraht Material:	4 lagen Kupferdraht
Schwingspulendurchmesser:	3"
Schwingspulenind. (Le):	0,66mH
Äquivalentvolumen (Vas):	53 l.

Data according to manufacturer. Errors and changes reserved.

Datasheets

Datasheet 1

Datasheet 1 (373.58 KB)

Manufacturer "Dayton Audio"

Related links of the manufacturer

Manufacturer website

Accessory Items

Only 2 available

UMII12 CB Subwoofer Bausatz. Empfohlen für geschlossene Gehäuse

UMII12 CB Subwoofer Kit. Recommended for closed enclosuresUltimax UMII 12 CB Kit passive Dayton Audio 12" Ultimax II Subwoofer without Enclosure Assembly: Dayton Audio UMII12-22 Properties: Dayton Audio UMII12-22 12" Subwoofer for e.g. 72-85 liters sealed enclosures About the CaseThis enclosure was specifically designed for the Dayton Audio 12" Ultimax II subwoofer. During the CNC manufacturing process, grooves and joints are cut into the back panel to allow the platesprecisely align. A unique two-part strut provides superior stiffness withoutperformance of the subwoofer. Both side walls feature folded extensions withCutouts to perfectly mount the first piece of the two-part, double-thick baffle. The final result is a resonance-free, closed subwoofer enclosure that was specifically designed,to get the best performance out of the 12" Ultimax subwoofer from Dayton Audio. All that is still totun bleibt, ist, es passend zu Ihrem Dekor zu veredeln oder es zu lackieren, um sich abzuheben. Spezifikationen: Plate thickness: 19mm, Baffle 38mm - Plate material: Medium Density Fiberboard (MDF) -Fertiges Nettovolumen (minus the double thick baffle and bracing: 76L - External dimensions:490mm H x 410mm W x 510mm D - Weight: approx. 17kg Über the subwooferWe present the UMII12-22 Ultimax II 12" Carbon Fiber Cone Subwoofer from Dayton Audio. Building on the success of its predecessor, these subwoofers have been carefully engineered to exceed all expectations. With improved excursion capability, lower distortion, higher power handling, better efficiency, and increased performance, the new Ultimax II generation elevates subwoofers and your audio experience to new low-frequency experiences. Immerse yourself in rich, pounding bass that will shake you to the core. Dayton Audio continues to redefine the boundaries of excellence with the UMII12-22 subwoofer. Key Features A large aluminum shorting cap helps keep inductance linear to guarantee minimal distortion. The rigid yet lightweight woven carbon fiber cone delivers a fast, detailed, and accurate response. With ±22 mm xmax, you can expect a powerful and deep bass response that takes your audio experience to the next level. Equipped with a 4-layer 3" flat wound voice coil that can handle up to 800 watts RMS. Basket and motor are extensively vented, ensuring efficient heat dissipation for consistent and reliable operation while minimizing power compression. Dual spiders maintain cone linearity even at extremely high excursion levels, providing optimal audio performance at all times. Optimized for compact sealed enclosures but capable of achieving exceptional low-frequency extension in bass reflex designs – offering you the freedom to create the perfect audio setup. Technical Data: Frequenzumfang: f-3dB: 20-120Hz active operation recommended B/H/T: 410x490x510mm Total impedance: 4 Ohms ((Nom.) 4 Ohms >2200Hz) or 2x2 Ohms Funktionsprinzip: closed Scope of delivery: Screws Chassis Terminal LS Cable Blueprint The delivery time refers to the kit without the housing. Bei der ausgwewählten Anzahl handelt es sich um pieces,notto pair.

€334.95*

UMII12 CB Gehäusebausatz neue Generation

UMII12 CB Housing Kit New GenerationDear Customer, unfortunately, there is currently a bug in our shop. With some of our cases-Bausätze therefore the configurator does not work. We are working diligently on a solution. Until then, do not hesitate to request your desired case by email. [email protected] Available options: Only formwork: MDF raw – MDF black raw Gehäuse Kit Components: MDF raw – MDF black raw Housing glued ready: MDF raw – MDF primed Black or White – MDF RAL Lacquered – MDF black raw Other versions available on request. Ultimax UMII12 CB Case Kit New Generationsuitable for assembly:Dayton Audio UMII12-22 76L Flat Pack Enclosure Kit About the CaseThis clever enclosure was specifically designed for the Dayton Audio 12" Ultimax subwoofer. During the CNC manufacturing process, grooves and joints are cut into the back panel to allow the platesprecisely align. A unique two-part strut provides superior stiffness withoutPerformance of the subwoofer. Both side walls feature 19mm folded extensionswith cutouts to perfectly mount the first piece of the two-part, double-thick baffle. Das Endergebnis ist ein resonanzfreies, geschlossenes Subwoofergehäuse, das speziell entwickelt wurde, umgetting the best performance out of the 12" Ultimax subwoofer from Dayton Audio. All that's left to doremains to refine it to match your decor or to paint it to stand out. Spezifications: Panel thickness: 19mm, baffle 38mm plus bracing - Panel material: Medium densityFiberboard (MDF) - Finished net cabinet volume (excluding the double thick baffle, theBracing and the low-frequency volume): 76L – External dimensions: approx.: W/H/D 410x490x510mm - Weight: 28kg Attention, please note and for any change requests, please use the comment field or email for change requests.address: In all our enclosure kits, unless otherwise mentioned, terminal cutouts for our terminalT105 on the back of the case, prefabricated! All housing kits (not glued or painted) are without rounded edges or chamfers! Chamfers or roundings are only made on "fully glued" assembled housings.

From €35.00*

Details