Dayton Audio ND91-4
Dayton Audio ND91-4 3-1/2” Aluminum Cone Full-Range Neo Driver 4 Ohm The low distortion and high excursion capabilities of the Dayton Audio ND91-4 3-1/2" full-range driver make it an ideal candidate for miniature point-source monitors, surround speakers, and line arrays. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Low distortion, full-range 65 Hz to 17 kHz performance Rubber-edged black anodized aluminum alloy cone Large excursion capability—4.6 mm Xmax, 25 mm peak Self-shielded Neo-Balanced motor structure with copper alloy shorting ring 1" 4-layer underhung voice coil with polyimide former 30 watts RMS power handling Great for line arrays and micro monitors Dayton Audio ND91-4 3-1/2" Aluminum Cone Full-Range Neo Driver 4 Ohm Dayton Audio's ND91 aluminum cone full-range drivers are the latest addition to the acclaimed ND Series high output/low distortion neodymium transducers. By increasing the original ND90's voice coil diameter from 3/4" to 1" and adding a copper alloy shorting ring, the ND91-4 features even lower distortion and delivers better bass impact and dynamic range—with peak Xmax up to 25 mm! This high-BL version further exploits the low distortion characteristics of the Neo-Balanced motor's optimized magnetic field, making the ND91 drivers an excellent choice for full-range point-source speaker enclosures, as well as extremely accurate, high resolution line arrays.
Dayton Audio DC130B-8
Dayton Audio DC130B-8 5-1/4" Classic Woofer Speaker Dayton Audio's DC130B-8 5-1/4" Classic Series woofer is perfect for compact 2-way designs as well as use in multiples or transmission lines. Key Features Sturdy, easy-to-countersink round steel frame Coated paper cone provides smooth response and reduced cone breakup Aluminum voice coil former for high power handling Large diameter flat spider and good Xmax for clean bass Suitable for sealed or vented enclosures Dayton Audio DC130B-8 5-1/4" Classic Woofer Speaker One of the main design goals at Dayton Audio is to create loudspeakers that can achieve high levels of performance at reasonable prices. The Dayton Audio DC130B-8 5-1/4" woofer is a great example of this approach. It features a non-pressed treated paper cone, rubber half-roll surround, ASV voice coil, coated cloth dust cap, and excellent low frequency response.
Dayton Audio RSS315HFA-8
Dayton Audio RSS315HFA-8 12” Reference HF Subwoofer 8 Ohm Dayton Audio's Reference Series RSS315HFA-8 12" subwoofer utilizes the same low-distortion design as the rest of the series, but provides an 8 ohm alternative for increased connection and impedance-loading options. Key Features Extensively vented motor eliminates power compression and allows quiet excursion Lighter-weight black anodized aluminum cone minimizes moving mass 2-layer coil for reduced back EMF Triple shorting-ring motor for ultra-low distortion Optimized for large enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS315HFA-8 12" Reference HF Subwoofer 8 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of the RSS315HFA-8 12" driver is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three magnetic short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose this High Fidelity (HF) version for home speaker systems when your priority is clean, low bass and you are not restricted by cabinet size.
Dayton Audio TCP115-4
Dayton Audio TCP115-4 4” Treated Paper Cone Midbass With high excursion capabilities and low Fs, Dayton Audio's TCP115-4 can produce a surprising amount of bass for a 4" woofer. In addition to its low frequency performance, this driver also performs very well through the midrange, making this driver ideal for use in smaller 2-way designs. Key Features Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure Dayton Audio TCP115-4 4" Treated Paper Cone Midbass Woofer 4 Ohm The TCP115-4 combines a large motor, 1" 4-layer voice coil, vented pole, and a sizable rubber surround to make use of its 4 mm of XMAX. This combination of features makes it a very versatile driver which can be used as a bass driver in a small 2-way system, center channel, or even portable Bluetooth speaker designs.
Dayton Audio RSS390HF-4
Dayton Audio RSS390HF-4 15” Reference HF Subwoofer 4 Ohm Engineered to provide high-volume, low-distortion bass in larger rooms and other highly demanding applications, the Dayton Audio RSS390HF-4 15" Reference Series subwoofer speaker offers the perfect combination of high definition sound quality and low frequency impact. Key Features Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Suitable for sealed or vented enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS390HF-4 15" Reference HF Subwoofer 4 Ohm The Dayton Audio Reference Series RSS390HF-4 15" speakers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three magnetic short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Dayton Audio SIG180-4 6.5” Signature Series Extended Range 80W Driver 4 Ohm
The Dayton Audio Signature Series was designed to give DIY speaker designers access to the pinnacle of speaker technology at the value expected from Dayton Audio. Featuring an open aluminum cast frame, anodized aluminum cone and a polyimide former, these drivers can provide extended range with incredibly low distortion. After hours of painstaking engineering and testing with meticulous attention to detail, we at Dayton Audio deem this driver line worthy of the endorsement of even the most critical audiophile. Key Features Extensive Klippel LMP and LSI testing to optimize Bl symmetry and parameters Indexed cone/surround junction for smooth transition/frequency response Polyimide formers and aluminum shorting sleeve for improved inductance, damping, and frequency response One piece concave black anodized aluminum cone Vented former and elevated spider for improved air flow Open aluminum cast frame for improved heat dissipation Countersunk stainless steel magnet badging for long time aesthetics Dayton Audio SIG180-4 6.5” Signature Series Extended Range 80W Driver 4 Ohm The Dayton Audio Signature Series was designed to give DIY speaker designers access to the pinnacle of speaker technology at the value expected from Dayton Audio. Featuring an open aluminum cast frame, anodized aluminum cone and a polyimide former, these drivers can provide extended range with incredibly low distortion. Key Specs Nominal Diameter: 6-1/2" Power Handling (RMS): 80 watts Power Handling (MAX): 160 watts Impedance: 4Ω Frequency Response: 40 - 4,000 Hz Sensitivity: 91.0 dB @ 2.83V/1m Voice Coil Diameter: 31.8mm Maximum Linear Excursion: 5mm Signature Sound and Performance The smooth and extended frequency response of these Dayton Audio speaker drivers ensures that the entire audible spectrum is accurately reproduced, from the lowest bass notes to the highest treble frequencies. This well-balanced frequency response delivers a natural and immersive listening experience, allowing you to hear every detail and nuance in your favorite music or movies. Meticulous Attention to Detail The speaker drivers' design, materials, and meticulous engineering work in harmony to minimize distortion, ensuring that the sound remains clean and clear even at high volumes. By achieving low distortion, these speaker drivers provide an accurate representation of the original audio signal, allowing audiophiles to enjoy a true-to-life listening experience with exceptional clarity and precision. The Signature Series speaker drivers used rigorous Klippel testing throughout the design process, a state-of-the-art analysis method to provide optimal performance, consistency, and reliability by precisely measuring and optimizing the drivers' magnetic and mechanical properties. Featuring the innovative use of aluminum shorting sleeves, our speakers deliver unmatched audio performance. These Faraday rings, expertly situated around the driver's pole piece, not only stabilize the magnetic field but also significantly reduce inductive distortion. The result? Consistent, high-quality sound in every note. Thanks to aluminum's superior conductivity, every audio signal is transmitted efficiently and without distortion. Indexed Cone and Surround Junction Diffraction caused by the abrupt edge of the surround is minimized by the use of an indexed junction. This design feature helps create a smooth transition between the cone and surround, resulting in improved frequency response while improving the rigidity of the cone further resulting in less cone distortion at high excursion. Vented Polyimide Former with CCA Voice Coil Wire and Elevated Spider Suspension The polyimide voice coil formers provide excellent mechanical damping and a smoother frequency response, and the copper-clad aluminum (CCA) wire reduces moving mass further enhancing the overall sound quality and increasing the efficiency of the speaker driver. An elevated spider and vented former increases airflow to the coils to keep the assembly running cool during long periods of use. Concave Black Anodized Aluminum Cone The aluminum construction of the cone is lightweight, rigid, and helps reduce distortion, contributing to a more accurate sound reproduction. The anodization process is optimized to contribute to the dampening of the cone and provides high aesthetic value to any speaker design. Open Aluminum Cast Frame and CNC'd Stainless-Steel Badging The aluminum cast frame keeps movement isolated to the diaphragm, increasing low frequency performance and providing additional thermal dissipation. Stainless-steel badging completes the sleek aesthetic of the Signature Series drivers providing a timeless visual appeal for every speaker designer.
Dayton Audio HTS545HE-4 Kraken
Dayton Audio HTS545HE-4 Kraken 21” High Excursion Subwoofer with 5” Voice Coil 4 Ohm Dayton Audio's HTS545HE-4 21" Kraken high output home theater subwoofer is built for the deepest bass, maximum SPL, and low distortion. Appropriately named the Kraken, this beast of a driver is capable of moving extreme amounts of air with outstanding control and power. With a potent ferrite motor, 5" voice coil, rigid treated paper cone, dual spiders, rugged cast aluminum frame, 95.6 dB sensitivity, and 42 mm of peak-to-peak excursion this driver will seriously shake your home theater to its foundation. The Kraken is the master of the deep! Key Features Massive 5" inside/outside wound voice coil for extreme power handling and incredible control 21 mm of excursion with minimal loss of motor force allows incredible displacement capability True dual spider design with ample spacing to keep excursion linear with low distortion Reinforced treated paper cone keeps unwanted resonances under control Aluminum shorting sleeve for minimal distortion when driven to extreme levels Unique over-excursion protection system warns you just before catastrophic failure Dayton Audio HTS545HE-4 Kraken 21" High Excursion Subwoofer with 5" Voice Coil 4 Ohm It takes a monster to deliver serious bass response You need to move a lot of air for high SPL and deep bass response, and Dayton Audio's HTS545HE-4 21" Kraken home theater subwoofer driver can beat most high output subwoofers in the industry. This massive driver is capable of 21 mm of excursion in each direction (@ 70% BL, Klippel verified) giving it the ability to move over 7 liters of displacement with each stroke. Displacement isn't all you need for maximum output; power handling and efficiency are also necessary. Capable of handling 2,000 watts RMS and with over 95 dB sensitivity, the HTS545HE-4 has what it takes to deliver ultra-low frequency response with authority. Dayton Audio has released the Kraken to bring you true high output, low frequency bliss. Know when to say when with Over-Excursion Protection Although the Dayton Audio HTS545HE-4 21" is designed to produce incredibly low frequencies at phenomenal output for extended periods of time, we understand that subwoofers are frequently driven up to and beyond their published limits and we expect that this driver will be no exception. All too often subwoofers fail prematurely due to being over driven, so to minimize this from happening and to extend its life Dayton Audio implemented an OEP (Over-Excursion Protection) system which audibly alerts the user just before catastrophic failure occurs. The Dayton Audio's HTS545HE-4 is purposely built to provide years of the powerful bass you crave. Extreme power, but also control and accuracy Powering the Dayton Audio HTS545HE-4 is an advanced high energy double stacked ferrite motor assembly. Unlike neodymium magnets, the powerful ferrite magnets are capable of delivering a constant motor force even when exposed to high heat to keep power compression at a minimum. Its 5" inside/outside wound voice coil uses a fiberglass former that can withstand extreme temperatures to handle up to 2,000 watts RMS without issue. A large pole piece vent, 6 peripheral gap vents, and numerous vents between the frame and top plate allow plenty of air to move across the voice coil, further reducing power compression caused by increased resistance due to heat. To keep distortion to a minimum at high output, the pole piece also includes a large aluminum shorting sleeve. All of this gives the HTS545HE-4 the ability to deliver predictable and consistent low frequency output even when driven to extreme SPL levels for extended periods. In addition, most high excursion subwoofer drivers suffer from lower midbass response and tend to lack impact and punch, the HTS545HE-4 has the motor strength to produce unbelievable midband efficiency, control, and output which eliminates the need for additional midbass systems in large home theaters. Built to last a lifetime Dayton Audio built the HTS545HE-4 to take the continuous output necessary to accurately reproduce today's demanding movie soundtracks. The naturally damped treated paper cone is optimized and reinforced to handle the stress of exceptionally high excursion while maintaining its shape. To keep the cone under control, the HTS545HE-4 uses dual large diameter spiders with ample spacing to provide extreme linearity. A huge SBR foam surround is double stitched to the cone to allow for incredible linear excursion, even when driven to its limits and beyond. Holding everything together is a rugged cast aluminum frame that will not restrict airflow, and includes integrated push button wire terminals for a reliable and secure electrical connection. The HTS545HE-4 has been built to deliver years of worry-free performance. Beware the power and impact of the Kraken If you're looking for one of the highest output ultra-low frequency drivers in the industry, the Dayton Audio HTS545HE-4 is an unbeatable value. This versatile driver is a great choice for vented designs, back loaded horns, and even tapped horns. With a 4 ohm voice coil this driver is also perfect for use in dual and quad driver systems for the ultimate in extended low frequency output capability. A true monster of a driver, Dayton Audio's Kraken comes from the abyss to take you down into the depths. Note: Please be sure to secure everything in your house before you release the Kraken.
Dayton Audio DCS165-4
DCS165-4 6-1/2" Classic Subwoofer 4 Ohm Capable of impressive low end when installed in enclosures of less than 0.5 cubic feet, the DCS165-4 6-1/2" subwoofer from Dayton Audio's Classic Series is the perfect low cost solution for compact low frequency designs. Key Features 4-layer VC with polyimide former allows high power handling Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression Copper pole piece cap minimizes inductance Rigid non-pressed treated paper/Kevlar cone with rubber surround Great for home and automotive applications Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm If you want outrageous amounts of bass, you gotta move some air Dayton Audio's rugged DCS165-4 6-1/2" subwoofer has all of the performance-enhancing attributes you would expect from a larger high-output subwoofer. With a vented pole piece and 4 ohm, 4-layer voice coil, this driver can handle up 100 watt RMS. The non-pressed paper cone is reinforced with Kevlar to increase stiffness, which promotes linear travel through the limits of its excursion. In addition, the pole piece includes a copper cap that keeps inductance to a minimum. The DCS165-4 driver is ideal for use in small multimedia speakers, portable speakers, or even automotive systems where space is at a minimum.
Dayton Audio TCP115-8
Dayton Audio TCP115-8 4” Treated Paper Cone Midbass With high excursion capabilities and low Fs, Dayton Audio's TCP115-8 can produce a surprising amount of bass for a 4" woofer. In addition to its low frequency performance, this driver also performs very well through the midrange, making this driver ideal for use in smaller 2-way designs. Key Features Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure Dayton Audio TCP115-8 4" Treated Paper Cone Midbass Woofer 8 Ohm The TCP115-4 combines a large motor, 1" 4-layer voice coil, vented pole, and a sizable rubber surround to make use of its 4 mm of XMAX. This combination of features makes it a very versatile driver which can be used as a bass driver in a small 2-way system, center channel, or even portable Bluetooth speaker designs.
Dayton Audio ND91-8
Dayton Audio ND91-8 3-1/2” Aluminum Cone Full-Range Neo Driver 8 Ohm The low distortion and high excursion capabilities of the Dayton Audio ND91-8 3-1/2" full-range driver make it an ideal candidate for miniature point-source monitors, surround speakers, and line arrays. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Low distortion, full-range 65 Hz to 17 kHz performance Rubber-edged black anodized aluminum alloy cone Large excursion capability—4.6 mm Xmax, 25 mm peak Self-shielded Neo-Balanced motor structure with copper alloy shorting ring 1" 4-layer underhung voice coil with polyimide former 30 watts RMS power handling Great for line arrays and micro monitors Dayton Audio ND91-8 3-1/2" Aluminum Cone Full-Range Neo Driver 8 Ohm Dayton Audio's ND91 aluminum cone full-range drivers are the latest addition to the acclaimed ND Series high output/low distortion neodymium transducers. By increasing the original ND90's voice coil diameter from 3/4" to 1" and adding a copper alloy shorting ring, the ND91-8 features even lower distortion and delivers better bass impact and dynamic range—with peak Xmax up to 25 mm! This high-BL version further exploits the low distortion characteristics of the Neo-Balanced motor's optimized magnetic field, making the ND91 drivers an excellent choice for full-range point-source speaker enclosures, as well as extremely accurate, high resolution line arrays.
Dayton Audio DC130B-4
Dayton Audio DC130B-4 5-1/4" Classic Woofer Speaker The Dayton Audio DC130B-4 5-1/4" woofer is a 4 ohm, round frame version of the popular Classic Series DC130 drivers. Key Features Sturdy, easy-to-countersink round steel frame 4 ohm impedance offers alternative load possibilities Coated paper cone provides smooth response and reduced cone breakup Aluminum VC former and vented pole piece for high power handling Large diameter flat spider and good Xmax for clean bass Suitable for sealed or vented enclosures Dayton Audio DC130B-4 5-1/4" Classic Woofer Speaker One of the main design goals at Dayton Audio is to create loudspeakers that can achieve high levels of performance at reasonable prices. The Dayton Audio DC130B-4 5-1/4" woofer is a great example of this approach. It features a non-pressed treated paper cone, rubber half-roll surround, ASV voice coil, vented pole piece, coated cloth dust cap, and excellent low frequency response.
Dayton Audio SIG150-4 5.25” Signature Series Woofer 60W Driver 4 Ohm
The Dayton Audio Signature Series was designed to give DIY speaker designers access to the pinnacle of speaker technology at the value expected from Dayton Audio. Featuring an open aluminum cast frame, anodized aluminum cone and a polyimide former, these drivers can provide extended range with incredibly low distortion. After hours of painstaking engineering and testing with meticulous attention to detail, we at Dayton Audio deem this driver line worthy of the endorsement of even the most critical audiophile. Key Features Extensive Klippel LMP and LSI testing to optimize Bl symmetry and parameters Indexed cone/surround junction for smooth transition/frequency response Polyimide formers and aluminum shorting sleeve for improved inductance, damping, and frequency response One piece concave black anodized aluminum cone Vented former and elevated spider for improved air flow Open aluminum cast frame for improved heat dissipation Countersunk stainless steel magnet badging for long time aesthetics Dayton Audio SIG150-4 5.25” Signature Series Extended Range 60W Driver 4 Ohm The Dayton Audio Signature Series was designed to give DIY speaker designers access to the pinnacle of speaker technology at the value expected from Dayton Audio. Featuring an open aluminum cast frame, anodized aluminum cone and a polyimide former, these drivers can provide extended range with incredibly low distortion. Key Specs Nominal Diameter: 5-1/4" Power Handling (RMS): 60 watts Power Handling (MAX): 120 watts Impedance: 4Ω Frequency Response: 60 - 4,000 Hz Sensitivity: 91.1 dB @ 2.83V/1m Voice Coil Diameter: 26.7mm Maximum Linear Excursion: 4mm Signature Sound and Performance The smooth and extended frequency response of these Dayton Audio speaker drivers ensures that the entire audible spectrum is accurately reproduced, from the lowest bass notes to the highest treble frequencies. This well-balanced frequency response delivers a natural and immersive listening experience, allowing you to hear every detail and nuance in your favorite music or movies. Meticulous Attention to Detail The speaker drivers' design, materials, and meticulous engineering work in harmony to minimize distortion, ensuring that the sound remains clean and clear even at high volumes. By achieving low distortion, these speaker drivers provide an accurate representation of the original audio signal, allowing audiophiles to enjoy a true-to-life listening experience with exceptional clarity and precision. The Signature Series speaker drivers used rigorous Klippel testing throughout the design process, a state-of-the-art analysis method to provide optimal performance, consistency, and reliability by precisely measuring and optimizing the drivers' magnetic and mechanical properties. Featuring the innovative use of aluminum shorting sleeves, our speakers deliver unmatched audio performance. These Faraday rings, expertly situated around the driver's pole piece, not only stabilize the magnetic field but also significantly reduce inductive distortion. The result? Consistent, high-quality sound in every note. Thanks to aluminum's superior conductivity, every audio signal is transmitted efficiently and without distortion. Indexed Cone and Surround Junction Diffraction caused by the abrupt edge of the surround is minimized by the use of an indexed junction. This design feature helps create a smooth transition between the cone and surround, resulting in improved frequency response while improving the rigidity of the cone further resulting in less cone distortion at high excursion. Vented Polyimide Former with CCA Voice Coil Wire and Elevated Spider Suspension The polyimide voice coil formers provide excellent mechanical damping and a smoother frequency response, and the copper-clad aluminum (CCA) wire reduces moving mass further enhancing the overall sound quality and increasing the efficiency of the speaker driver. An elevated spider and vented former increases airflow to the coils to keep the assembly running cool during long periods of use. Concave Black Anodized Aluminum Cone The aluminum construction of the cone is lightweight, rigid, and helps reduce distortion, contributing to a more accurate sound reproduction. The anodization process is optimized to contribute to the dampening of the cone and provides high aesthetic value to any speaker design. Open Aluminum Cast Frame and CNC'd Stainless-Steel Badging The aluminum cast frame keeps movement isolated to the diaphragm, increasing low frequency performance and providing additional thermal dissipation. Stainless-steel badging completes the sleek aesthetic of the Signature Series drivers providing a timeless visual appeal for every speaker designer.
Dayton Audio DC160-8
Dayton Audio DC160-8 6-1/2" Classic Woofer Choose the Dayton Audio DC160-8 Classic Series 6-1/2" woofer for use as a great replacement bookshelf speaker, midbass in 3-way designs, or even as a small subwoofer. Key Features Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Low 34 Hz free-air resonance Dayton Audio DC160-8 6-1/2" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC160-8 6-1/2" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. You can even be use the DC160-8 as a small subwoofer! The excellent low frequency performance will amaze you. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio DC380-8
Dayton Audio DC380-8 15" Classic Woofer The Dayton Audio Classic Series 15" woofer is excellent as a replacement driver or for new system design and construction. The versatile set of parameters makes it suitable for sealed or vented enclosure designs. Key Features Treated paper cone provides smooth response and low energy storage Aluminum former, vented pole piece, and porous dustcap for high power handling Large diameter flat spider and healthy Xmax for clean bass Bring those old vintage speakers back to life Dayton Audio DC380-8 15" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC380-8 15" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.35 allows the DC300-8 to work well in both sealed and ported speaker enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio GF180-4
Dayton Audio GF180-4 6-1/2" Glass Fiber Cone Woofer 4 Ohm Dayton Audio’s GF180-4 6-1/2” glass fiber cone woofer is built to produce powerful bass with smooth midrange response. The woven fiberglass cone and rubber surround damps cone resonances allowing an easy transition to tweeters when crossed over at 2,000 Hz. This affordable woofer is a great choice for 2-way bookshelf speaker designs. Key Features Woven fiberglass cone lowers resonances for smooth response and natural sound 4-layer voice coil on an aluminum former provides excellent heat dissipation Rubber surround helps damp the outside edge of the cone improving high frequency response Vented pole piece releases air trapped under the dustcap for quiet operation Low-profile frame minimizes diffraction making these drivers suitable for surface mount applications Dayton Audio GF180-4 6-1/2" Glass Fiber Cone Woofer 4 Ohm With flat response to 4,000 Hz and excellent low frequency extension, the GF180-4 6-1/2” glass fiber cone woofer from Dayton Audio is ideal for use in low cost 2-ways speaker designs. The naturally damped woven fiberglass cone is driven by a 4-layer voice coil wound on an aluminum former. This driver is a great choice for your next bookshelf speaker, multiple driver tower, or even portable sound systems
Dayton Audio RS180P-8 7" Reference Paper Woofer 8 Ohm
Dayton Audio Reference Series paper cone drivers combine class-leading low distortion performance with super smooth frequency response due to the use of a proprietary cone blend. Key Features Three-part paper composite diaphragm featuring paper, Kevlar, and glass fibers Similar cosmetics and design features as original Reference Series with low-distortion motor, 6-hole cast frame, rubber surround, and solid aluminum phase plug Perfect as woofers, midwoofers, or dedicated midrange drivers 6 mm Xmax and 89 dB sensitivity The performance of the original groundbreaking Reference Series from Dayton Audio, now available with a paper cone! The Reference Series Paper drivers use a proprietary paper cone formulation combining natural paper pulp and synthetic Kevlar® and glass fibers to create an advanced non-woven fiber composite that delivers the perfect combination of excellent detail and smooth, natural sonic character, plus a distinctive, classy look.
RedCatt OBW 15
Ultimativer Open-Baffle-Tieftöner mit 897 cm² Membranfläche und 95 dB Wirkungsgrad. Auch für Wandeinbau, bestens geeignet. Der REDCATT OBW 15 trägt den Zusatz „OBW“ weil er ein ausgesprochenes Open Baffle Chassis ist. Natürlich kann man ihn auch in große Gehäuse einbauen, die dann aber leicht Schrankwandgröße erreichen würden. Bis 500 Hz verhält er sich ideal, mit einer mittleren Abweichung von +/- 1.09 dB. Der REDCATT OBW 15 ist der ideale Partner für „Extrem-Hochtöner“ z.B. einem 2″ Treiber und einem 21″ Kugelwellenhorn. Besonders zu empfehlen sind Kombination mit Breitbandchassis oder Koaxialchassis ab ca. 6″ Technische Daten Außendurchmesser: mm Einbaudurchmesser: mm Membranfläche SD: 897 cm² Resonanzfrequenz Fs: 43 Hz DC-Widerstand Rdc: 6.18 Ohm Mechanische Güte Qms: 6.518 Elektrische Güte Qes: 0.765 Gesamtgüte Qts: 0.685 Effektive bewegte Masse Mms: 94.8 gr. Äquiv. Luftvolumen Vas: 149.24 dm³ Kraftfaktor BL: 14.38 N/A Wirkungsgrad Eta: 94.92 dB (1m, Halbraum)
Dayton Audio ND64-4
Dayton Audio ND64-4 2-1/2” Aluminum Cone Full-Range Neo Driver 4 Ohm Dayton Audio’s ND64-4 is truly a full-range, low distortion driver and capable of over 6 mm of peak-to-peak excursion. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Rubber-edged aluminum magnesium alloy cone Dual neodymium motor structure 4-layer voice coil with polyimide former Copper sleeve to minimize distortion High power handling Dayton Audio ND64-4 2-1/2" Aluminum Magnesium Cone Full-Range Neo Driver 4 Ohm Dayton Audio’s ND64-4 is truly a full-range driver and capable of over 6 mm of peak-to-peak excursion. It features a dual neodymium magnet structure, a 3/4" CCAW voice coil, and a copper sleeve to minimize distortion. An efficient, low-distortion neodymium motor is combined with a rigid yet lightweight aluminum magnesium diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source speaker applications, or combined in multiples in line array designs.
Dayton Audio RSS315HF-4
Dayton Audio RSS315HF-4 12” Reference HF Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofer speakers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Key Features Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Suitable for sealed or vented enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS315HF-4 12" Reference HF Subwoofer 4 Ohm As with the rest of the Dayton Audio Reference Series speakers, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion for the Reference Series RSS315HF-4 12" subwoofer speaker. The black anodized cone, rubber surround, and custom basket give this driver and the rest of the Reference Series a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Dayton Audio SIG225-4
Test in Hobby HiFi 4-5/2024 Dayton Audio SIG225-4 8" Signature Series, Tieftöner 100W 4 Ohm Dayton Audio SIG225-4 8-Zoll-Treiber der Signature-Serie mit erweitertem Frequenzumfang. Die Dayton Audio Signature-Serie wurde entwickelt, um Heimwerker-Lautsprecherdesignern Zugang zur Spitze der Lautsprechertechnologie zu dem von Dayton Audio erwarteten Preis zu ermöglichen. Ausgestattet mit einem offenen Aluminiumgusskorb, einer eloxierten Aluminiummembran und einem Polyimid-Träger bieten diese Treiber eine größeren Frequenzumfang bei unglaublich geringer Verzerrung. Spezifikationen: Nenndurchmesser: 8" Belastbarkeit (RMS): 100 Belastbarkeit (MAX): 200 Impedanz: 4Ω Frequenzgang: 40Hz-3000Hz Empfindlichkeit: 91,2 dB bei 2,83 V/1 m Schwingspulendurchmesser: 2" Maximale lineare Auslenkung: 6 mm Der gleichmäßige und erweiterte Frequenzgang dieser Dayton Audio-Lautsprecherchassis sorgt dafür, dass das gesamte Hörspektrum von den tiefsten Bassnoten bis zu den höchsten Mitteltonbereich präzise wiedergegeben wird. Dieser ausgewogene Frequenzgang sorgt für ein natürliches und intensives Hörerlebnis, sodass Sie jedes Detail und jede Nuance Ihrer Lieblingsmusik oder -filme hören können. Akribische Liebe zum Detail; Das Design, die Materialien und die sorgfältige Konstruktion der Lautsprechertreiber arbeiten harmonisch zusammen, um Verzerrungen zu minimieren und sicherzustellen, dass der Klang auch bei hohen Lautstärken sauber und klar bleibt. Durch die Erzielung einer geringen Verzerrung bieten diese Lautsprecherchassis eine genaue Darstellung des ursprünglichen Audiosignals, sodass Audiophile ein naturgetreues Hörerlebnis mit außergewöhnlicher Klarheit und Präzision genießen können. Die Lautsprecherchassis der Signature-Serie wurden während des gesamten Designprozesses strengen Klippel-Tests unterzogen, einer hochmodernen Analysemethode, um optimale Leistung, Konsistenz und Zuverlässigkeit durch präzise Messung und Optimierung der magnetischen und mechanischen Eigenschaften der Treiber zu gewährleisten. Invers Kalotten-Membran- und Sicken-Anschluss; Die durch die abrupte Kante der Einfassung verursachte Beugung wird durch die Verwendung einer indexierten Verbindung minimiert. Dieses Designmerkmal trägt dazu bei, einen sanften Übergang zwischen Konus und Sicke zu schaffen, was zu einem verbesserten Frequenzgang führt und gleichzeitig die Steifigkeit des Konus weiter verbessert, was zu einer geringeren Konusverzerrung bei hoher Auslenkung führt. Belüfteter Polyimid-Schwingspulenträger mit CCA-Schwingspulendraht und erhöhter Spinnenaufhängung. Der Polyimid-Schwingspulenkörper sorgt für eine hervorragende mechanische Dämpfung und einen gleichmäßigeren Frequenzgang, und der kupferkaschierte Aluminiumdraht (CCA) reduziert die bewegte Masse, was die Gesamtklangqualität weiter verbessert, und die Effizienz des Lautsprechertreibers erhöht. Eine erhöhte Spinne und ein belüfteter Schwingspulenträger erhöhen den Luftstrom zu den Spulen, um die Baugruppe bei längerem Gebrauch kühl zu halten. Konkaver (Invers), schwarz eloxierte Aluminiummembran; Die Aluminiumkonstruktion der Kugelsegment-membran ist leicht, steif und trägt zur Reduzierung von Verzerrungen bei, was zu einer genaueren Klangwiedergabe beiträgt. Der Eloxierungsprozess ist so optimiert, dass er zur Dämpfung der Membran beiträgt und jedem Lautsprecherdesign einen hohen ästhetischen Wert verleiht. Offener Aluminiumgusskorb und Edelstahlplakette; Der Aluminiumgusskorb hält die Bewegung isoliert von der Membran, erhöht die Leistung bei niedrigen Frequenzen und sorgt für zusätzliche Wärmeableitung. Die Edelstahlplakette vervollständigt die elegante Ästhetik der Treiber der Signature-Serie und bietet jedem Lautsprecherdesigner einen zeitlosen optischen Reiz.
Dayton Audio DC250-8
Dayton Audio DC250-8 10" Classic Woofer Choose the Dayton Audio DC250-8 Classic Series 10" woofer for use as a great replacement speaker for large format 2-way and 3-way, ported or sealed loudspeakers. Key Features Best price/performance value available anywhere Excellent low frequency capabilities Rubber surround and vented pole piece Dayton Audio DC250-8 10" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC250-8 10" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.38 allows the DC300-8 to work well in both sealed and ported speaker enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio ND140-4
Dayton Audio ND140-4 4” Aluminum Cone Midbass Neo Driver 4 Ohm Dayton Audio's ND140-4 compact aluminum cone driver demonstrates the latest advances in high-excursion design processes. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Extended-range 54 Hz to 8 kHz performance Rubber-edged aluminum alloy cone Large excursion capability—4 mm Xmax, 20 mm peak Self-shielded Neo-Balanced motor structure 1" 4-layer underhung voice coil with polyimide former 40 watts RMS power handling Dayton Audio ND140-4 5-1/4" Aluminum Cone Midbass Neo Driver 4 Ohm Dayton Audio's compact aluminum cone drivers demonstrate the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source applications, or combined in multiples and line arrays.
Dayton Audio SIG270-4
Dayton Audio SIG270-4Test in Hobby HiFi 4-5/2024 The Dayton Audio Signature Series was developed to provide DIY speaker designers with access to the pinnacle of speaker technology at the price expected from Dayton Audio. Equipped with an open aluminum cast frame, an anodized aluminum cone, and a polyimide former, these drivers offer a wider frequency range with incredibly low distortion. After careful development and testing with great attention to detail, we at Dayton Audio believe that this line of drivers deserves the approval of even the most critical audiophile.Main FeaturesExtensive Klippel LPM and LSI tests to optimize Bl symmetry and parametersIndexed cone/surround connection for smooth transition/frequency responsePolyimide former for improved mechanical damping and uniform frequency responseOne-piece, concave, black anodized aluminum diaphragmOpen aluminum casting basket for improved heat dissipationRecessed stainless steel magnetic emblem for long-lasting aesthetics
Dayton Audio DC200-8
Dayton Audio DC200-8 8" Classic Woofer The Dayton Audio DC200-8 Classic Series 8" woofer achieves high levels of performance at a reasonable price. It's perfect as the basis of a custom speaker project, or for repairs and upgrades. Key Features Great price/performance ratio Treated non-pressed paper cone with rubber surround Vented pole piece for better power handling Clean, balanced sound quality Dayton Audio DC200-8 8" Classic Woofer Dayton Audio's DC200-8 Classic Series 8" woofer offers one of the best price/performance values available anywhere. This DC200-8 8" speaker, and in fact the whole Classic Series, has a non-pressed treated paper cone, ASV voice coil, vented pole piece, rubber surround, coated cloth dust cap, and excellent low frequency performance.
Dayton Audio DSA215-8
Dayton Audio DSA215-8 8" Designer Series Aluminum Cone Woofer Dayton Audio's Designer Series DSA215-8 8" woofer combines smooth response, excellent bass performance, and a stylish visual presentation. Key Features Cosmetic frame with low profile lip, designed for front mounting—no countersinking required! Low distortion motor system with copper shorting ring Black anodized aluminum cone, half roll rubber surround for durability and accurate reproduction Smooth frequency response and linear roll-off simplify filter design Vented pole piece for minimized power compression and maximized reliability Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators Generous Xmax capability encourages use of moderate bass boost to tailor the response Dayton Audio DSA215-8 8" Designer Series Aluminum Cone Woofer The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies — without exceeding Xmax. These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
Dayton Audio DC300-8
Dayton Audio DC300-8 12" Classic Woofer Choose the Dayton Audio DC300-8 Classic Series 12" woofer for use as a great replacement speaker for large format 2-way and 3-way, ported or sealed loudspeakers. Key Features Works great as a general replacement woofer Excellent price/performance ratio Bring those old vintage speakers back to life Long lasting rubber surround increases the life of the driver Dayton Audio DC300-8 12" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC300-8 12" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.33 allows the DC300-8 produce incredible low frequency extension in vented enclosures or tight response with a powerful kick in sealed enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Celestion CF0820BMB/8
Celestion CF0820BMB/8PA midrange speaker, 250 W, 8 Ω200 mm mid-woofer (8")Aluminum Cast BasketFerrite magnetHalf-round rubber surround for high XMAXBalanced ventilation ensures improved cooling
Dayton Audio SD215A-88
Dayton Audio SD215A-88 8" DVC-Subwoofer Der Dayton Audio SD215A-88 8" Subwoofer-Lautsprecher ist einer der preiswertesten Tieftöner auf dem Markt. Wesentliche Merkmale Funktioniert gleichermaßen gut in geschlossenen und belüfteten Gehäusen Attraktives, dichtungsloses Design Langlebige Gummisicke für jahrelangen, zuverlässigen Betrieb Ausgezeichnete Leistung in der unteren Oktave Dayton Audio SD215A-88 8" DVC Subwoofer Der Dayton Audio SD215A-88 8" Subwoofer-Lautsprecher ist einer der preiswertesten Tieftöner auf dem Markt. Die Dayton Audio Tieftöner der DVC-Serie wurden mit dem Ziel entwickelt, ein Maximum an Leistung pro Dollar zu bieten. Die Lautsprecher verfügen über polybeschichtete Papiermembranen, breite Gummisicken, große 8-Ohm-Doppelschwingspulen, belüftete Polschuhe und gestanzte Rückplatten. Ihr gesunder Xmax-Wert, die langhubige Konstruktion und die Doppelschwingspulen machen sie perfekt für jedes kostengünstige und dennoch leistungsstarke Subwoofer-Lautsprechersystem.
Dayton Audio PA310-8
Dayton Audio PA310-8 12” Pro Woofer Dayton Audio PA Series Pro Woofers are a great upgrade for musical instrument or sound reinforcement cabinets, and also excel in custom-built speaker systems. Key Features Strong, low-mass carbon fiber impregnated paper cone I-beam rolled edge 1.2 mm steel frame Low distortion motor system w/copper cap Powerful 80 oz. ceramic ferrite magnet Vented pole piece/vented voice coil gap improve thermal management Black motor parts and black polyimide voice coil former dissipate heat Bumped back plate for unrestricted excursion Dayton Audio PA310-8 12" Pro Woofer Dayton Audio PA Series Pro Woofers are a great upgrade for musical instrument or sound reinforcement cabinets, and also excel in custom-built speaker systems. High power handling, smooth response, low distortion, deep punchy bass, and rugged reliability are the features that set PA Series woofers apart from other drivers – premium performance, but value priced.
Dayton Audio RSS265HF-4
Dayton Audio RSS265HF-4 10” Reference HF Subwoofer 4 Ohm The Dayton Audio RSS265HF-4 10" subwoofer features the high-definition/low-distortion attributes of the acclaimed Reference Series, and provides great results in compact single-driver subwoofer speaker systems...or when used in multiples! Key Features Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Suitable for sealed or vented enclosures Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Highest quality materials throughout for long-lasting performance Dayton Audio RSS265HF-4 10" Reference HF Subwoofer 4 Ohm As with the rest of the Reference Series, the main focus of the Dayton Audio RSS265HF 10" subwoofer is ultra-low distortion. Second, third, and intermodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, thick rubber surround, and custom basket give this Dayton Audio driver a unique, high-end look. Choose the High Fidelity (HF) version for home systems when you are looking for clean, low bass and are not restricted by speaker cabinet size.
Dayton Audio LS10-44
Dayton Audio LS10-44 10" Low Profile Subwoofer Dual 4 Ohm Review by Hobby HiFi Dayton Audio's LS10-44 is an exciting subwoofer driver with a particularly shallow depth and impressive low bass talent with a surprisingly small enclosure volume requirement. surprisingly small enclosure volume. The impulse-compensating design of a slim floorstanding speaker is particularly attractive. of a slim floorstanding speaker without letting its size get out of hand. Bernd Timmermanns At a depth of less than 3.4", Dayton Audio's LS10-44 10" low profile subwoofer fits into shallow spaces that ordinary subs wouldn't dream of attempting! Dual 2" 4 ohm coils provide flexible wiring, while the flat cone and innovative suspension support 10 mm of Xmax! Key Features Innovative low-profile subwoofer – less than 3.4" thick! 10 mm Xmax guarantees uncompromised bass performance Dual 4 ohm voice coils, 6 layers total, for high BL force and multiple wiring options Rigid flat honeycomb fiberglass cone maintains linearity and high impact Low distortion ferrite motor with dual aluminum shorting rings Balanced rubber double-roll surround design improves stability and control Dayton Audio LS10-44 10" Low Profile Subwoofer Dual 4 Ohm Dayton Audio's shallow subwoofers let you put more bass into less space! The new LS10-44 Low Profile Subwoofer from Dayton Audio provides over 10 mm of controlled excursion, for bass that hits hard and goes deep -- even in places ordinary subwoofers just won't fit! These drivers are perfect for installation in walls, floors, and ceilings, or in limited-clearance automotive applications like the narrow space behind pickup truck seats. They might even fit under your chair or behind your sofa! Innovative design makes the shallow form factor of the LS Series low profile subwoofers possible. A flat, rigid piston made of aluminum honeycomb with glass fiber skins replaces the conventional cone of most subwoofers, and a balanced double-roll surround design maximizes the stability of the moving symmetrical motion and minimizes distortion. The LS10-44 also features dual heavy-gauge aluminum shorting rings for low inductance and fast, impactful bass. Lastly, a 6-layer dual voice coil ensures maximum available force from the compact motor, featuring high-grade ceramic ferrite magnetic material, and enables 2 ohm or 8 ohm wiring. Nothing has been sacrificed in creating these truly next-generation shallow subwoofers, capable of over 10 mm of linear excursion from an ultra-slim package. Trust the LS Series subwoofer drivers to deliver years of rugged, long-lasting enjoyment, wherever you install them. Wherever you would like to add more bass, Dayton Audio has you covered. Note: All parameters derived with voice coils wired in series.
Dayton Audio GF180-8
Dayton Audio GF180-8 6-1/2" Glass Fiber Cone Woofer 8 Ohm Dayton Audio’s GF180-8 6-1/2” glass fiber cone woofer is built to produce powerful bass with smooth midrange response. The woven fiberglass cone and rubber surround damps cone resonances allowing an easy transition to tweeters when crossed over at 2,000 Hz. This affordable woofer is a great choice for 2-way bookshelf speaker designs. Woven fiberglass cone lowers resonances for smooth response and natural sound Rubber surround helps damp the outside edge of the cone improving high frequency response 4-layer voice coil on an aluminum former provides excellent heat dissipation Vented pole piece releases air trapped under the dustcap for quiet operation Low-profile frame minimizes diffraction making these drivers suitable for surface mount applications Dayton Audio GF180-8 6-1/2" Glass Fiber Cone Woofer 8 Ohm With flat response to 4,000 Hz and excellent low frequency extension, the GF180-8 6-1/2” glass fiber cone woofer from Dayton Audio is ideal for use in low cost 2-ways speaker designs. The naturally damped woven fiberglass cone is driven by a 4-layer voice coil wound on an aluminum former. This driver is a great choice for your next bookshelf speaker, multiple driver tower, or even portable sound systems.
Dayton Audio RSS460HO-4
Dayton Audio RSS460HO-4 18” Reference HO Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Key Features Extensively vented motor eliminates compression and allows quiet excursion Extra-thick black anodized aluminum cone for maximum rigidity Triple shorting ring motor for ultra-low distortion 4-layer coil for high power handling Optimized parameters for relatively small enclosures Highest quality materials throughout for long-lasting performance Dayton Audio RSS460HO-4 18" Reference HO Subwoofer 4 Ohm The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
Dayton Audio ND105-8
Dayton Audio ND105-8 4” Aluminum Cone Midbass Neo Driver 8 Ohm Dayton Audio's ND105-8 compact aluminum cone midbass produces high-impact audio demonstrating the latest advances in high-excursion design processes. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Extended-range 60 Hz to 10 kHz performance Rubber-edged aluminum alloy cone Large excursion capability—4 mm Xmax, 20 mm peak Self-shielded Neo-Balanced motor structure 1" 4-layer underhung voice coil with polyimide former 30 watts RMS power handling Dayton Audio ND105-8 4" Aluminum Cone Midbass Neo Driver 8 Ohm Dayton Audio's compact aluminum cone drivers demonstrate the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source applications, or combined in multiples and line arrays.
Dayton Audio ND140-8
Dayton Audio ND140-8 5-1/4” Aluminum Cone Midbass Neo Driver 8 Ohm Dayton Audio's ND140-8's compact aluminum cone demonstrates the latest advances in high-excursion design processes. Its compact size and high output make it perfect for your next point-source or line array speaker project. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Extended-range 54 Hz to 8 kHz performance Rubber-edged aluminum alloy cone Large excursion capability—4 mm Xmax, 20 mm peak Self-shielded Neo-Balanced motor structure 1" 4-layer underhung voice coil with polyimide former 40 watts RMS power handling Dayton Audio ND140-8 5-1/4" Aluminum Cone Midbass Neo Driver 8 Ohm Dayton Audio's ND140-8 midbass driver features an efficient, low-distortion Neo-Balanced motor that is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source applications, or combined in multiples and line arrays.
Dayton Audio RS225-4
Dayton Audio RS225-4 8” Reference Woofer 4 Ohm The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, and solid aluminum phase plug. Key Features 4 ohm impedance is perfect for series pairs in MTMs and center channel speakers Excellent car audio midrange/midbass High-end low-distortion motor with two shorting paths to reduce inductance Designed and engineered in the USA Dayton Audio RS225-4 8" Reference Woofer 4 Ohm The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, and solid aluminum phase plug.