Dayton Audio DSA215-8
€94.45
Available, delivery time: 1-3 days
Dayton Audio DSA215-8 8" Designer Series Aluminum Cone Woofer
Dayton Audio's Designer Series DSA215-8 8" woofer combines smooth response, excellent bass performance, and a stylish visual presentation.
Key Features
- Cosmetic frame with low profile lip, designed for front mounting—no countersinking required!
- Low distortion motor system with copper shorting ring
- Black anodized aluminum cone, half roll rubber surround for durability and accurate reproduction
- Smooth frequency response and linear roll-off simplify filter design
- Vented pole piece for minimized power compression and maximized reliability
- Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators
- Generous Xmax capability encourages use of moderate bass boost to tailor the response
Dayton Audio DSA215-8 8" Designer Series Aluminum Cone Woofer
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies — without exceeding Xmax.
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
| Artikel-Nr.: | 295-530 |
|---|---|
| Außenmaß: | 215,9mm |
| Bohrlochanzahl: | 5 |
| DC Resistance (Re): | 5,9 Ohm |
| EAN: | 848791002427 |
| Eff. Membranfläche (Sd): | 211,2cm² |
| Effektive Bewegte Masse (Mms): | 346 |
| Einbautiefe: | 95,5 mm |
| Einbauöffnung: | 180,1 mm |
| Einheit: | Stück |
| Elektrische Güte (Qes): | 4 |
| Frequenzbereich: | 35 bis 7,000Hz |
| Gesamtgüte (Qts): | 33 |
| Größe: | 8 " |
| Impedanz (Z): | 8 Ohm |
| Korbmaterial: | Stahl |
| Kraftfaktor (BL): | 10,6T·m |
| Lineare Auslenkung (Xmax): | 5,5mm |
| Magnet: | Ferrit |
| Marke: | Dayton Audio |
| Mechanische Güte (Qms): | 187 |
| Membranmaterial: | Aluminium |
| Modell: | DSA215-8 |
| Nachgiebigkeit (Cms): | 0,6mm/N |
| Nennbelastbarkeit: | 80 Watt |
| Resonanzfrequenz (fs): | 35Hz |
| Schwingspulendurchmesser: | 38,6 mm |
| Schwingspulenind. (Le): | 1mH |
| Schwingspulenkörper: | Aluminium |
| Schwingspulenmaterial: | Kupfer |
| Sensitivität: | 89,2dB 2,83V/1m |
| Sickenmaterial: | Gummi |
| Äquivalentvolumen (Vas): | 37,378 l |
Accessory Items
Home Cinema F1 Speaker KitHome Cinema F1 3-Way Bass Reflex Floorstanding Speaker Assembly: Dayton Audio, DSA215-8, DC130B-8, ND25FW-4, Crossover Components Mundorf Hi-Quality: Properties: Modern designed floor-standing speaker for HiFi and home cinema. The slim design adapts to thetoday's apartment furnishings. A 3-way speaker with a consistently homogeneous sound characteristic,dynamic, powerful through an aluminum bass membrane, distortion-free homogeneous mids through thelight paper membrane and finely resolving treble with plenty of dynamic reserves. Even for wall proximityLineup suitable. Customer Review: Die CB F1 was for my son's children's room. So I built it with multiplex wood, because children's roomeverything is made of wood. Since I cannot saw, we bought enclosures with openings ready-made, that is great service becauseeverything fit perfectly right away. I am an electrician and can solder quite well, but not important at all thethe crossover is so simple that my 12-year-old soldered it under my guidance, turned out great withzweiten Anlauf, denn ganz wichtig dear HiFi variant the chokes must all be free from the protective varnishscraped off. Then we screwed it in and test run. Super sound at low tones. But at loudtones something was not right. Pulled and was like contact error. Checked everything and reviewed, then athifi variant called and after conversation error found. IMPORTANT, crossover must not be behind the magnets,must be at the bottom in the box. Then it sounded huge. Bass was with pressure, midrange clear and tweeter super clear. When we placed the box very close to the wallstellten wurde Bass noch mehr aber ohne dröhn. What the speakers from others did not do well, thefrom xxx were not so good. My son is happy and I am now building them for the living room as well. Regards, Piotrand Tomasz Scope of delivery: Screws Chassis Terminal Bass reflex tube Cable (Interior) Insulation fleece Crossover Components (Loose) Circuit board