UMII8 CB Subwoofer Bausatz. Empfohlen für geschlossene Gehäuse

Dayton Audio UMII8-22 Ultimax IIWir präsentieren den UMII8-22 Ultimax II 8" Carbon Fiber Cone Subwoofer von Dayton Audio. Building onthe success of their predecessor, these subwoofers were carefully developed to meet all expectations ofoutperform. With improved excursion capability, lower distortion, higher power handling,better efficiency and increased performance elevate the new Ultimax II generation subwoofers and yourAudio experience with new low-frequency experiences. Immerse yourself in rich, powerful bass that takes you to theMark will be shaken. Dayton Audio continues to define the boundaries of the UMII8-22 subwoofer in theExcellence new. Main features A large aluminum short-circuit cap helps to linearlyhold to guarantee minimal distortions. The rigid yet lightweight woven carbon fiberMembrane provides a fast, detailed, and accurate response. With ±18 mm xmax, you can apowerful and deep bass response that takes your audio experience to the next level.Equipped with a 4-layer 2-1/2" flat wound voice coil, handling up to 400 watts RMScan process. The basket and drive are comprehensively ventilated, allowing for efficient heat dissipation for aensures consistent and reliable operation while simultaneously performance compressionminimized. Dual spiders maintain membrane linearity even at extremely high excursion levelsand always provide optimal audio performance. Optimized for compact, closed enclosures, but inder Lage, in Bassreflex Designs eine außergewöhnliche Niederfrequenzerweiterung zu erzielen – offersYou the freedom to create the perfect audio setup.

The Dayton Audio SPA250DSP digitally processed plate amplifier offers an elite level of control over your entire system (i.e. subwoofer and mains). This unique amplifier allows you to fine tune your system's low frequency performance, and at the same time high pass to your mains (or satellites) protecting them from damage due to over excursion. Key Features DSP functions include: 7 PEQ bands, LPF, phase, subsonic filter, limiter, mains delay, and HPF Single-knob control panel with high-contrast LCD display and status LEDs Fast, intuitive PC-based GUI software enables full access to the DSP functions Efficient Class D output topology ensures high-impact low frequency performance Includes both balanced and unbalance line level inputs and outputs With a Dayton Audio 5 year warranty, it’s more than a guarantee, it’s a promise Dayton Audio's SPA250DSP true 250 watt digital switching plate amplifier features advanced signal processing control that every audio enthusiast wants. This power and flexibility is accessible via PC-GUI software and our innovative single-knob LCD control panel. For retrofit and enclosure designs with no amplifier cutout an optional amplifier mounting frame is available for this amplifier. Note: Windows 10 and 11 UsersMicrosoft .net Framework 3.5 is required for the SPA250-DSP software to run properly. This is not installed by default in Windows 10 or 11. 1. Power Mode: Select the either energy-saving or “always-on” power mode Auto: Amp goes into standby after no detected signal input for 20 minutes* On: Amp is always on, regardless of input signal status. * Amp will automatically turn on typically in one second or less once audio signals are resumed. 2. Analog input attenuation: Affects analog balanced and unbalanced inputs only. Normal: No attenuation. Hi: Attenuates input signal by -6dB. 3. USB Control: Used for PC-GUI communication with custom PC software included with your amp. 4. Feature Control: Single knob digital actuator with single/double-click enabled with rotary scrolling to navigate the amp’s extensive feature menu. 5. Limiter LED: Lit when Limiter is active (Red). 6. Standby/On LED: Red when amp is in energy saving “stand by” state. Green when amp is operating normally.

UMII8-22 CB Housing Kit New GenerationDear Customer, unfortunately, there is currently a bug in our shop. With some of our cases-Bausätze therefore the configurator does not work. We are working diligently on a solution. Until then, do not hesitate to request your desired case by email. [email protected] Available options: Only formwork: MDF raw – MDF black raw Gehäuse Kit Components: MDF raw – MDF black raw Housing fully glued: MDF raw – MDF primed Black or White – MDF RAL Lacquered – MDF black raw Other versions available on request. Ultimax UMII8 CB Case Kit New Generationsuitable for assembly:Dayton Audio UMII8-22 25L Flat Pack Enclosure Kit About the CaseThis clever enclosure was specifically designed for the Dayton Audio 8" Ultimax subwoofer. During the CNC manufacturing process, grooves and joints are cut into the back panel to assemble the platesprecisely align. A unique two-part strut provides superior stiffness withoutPerformance of the subwoofer. Both side walls have 19mm rabbeted extensionswith cutouts to perfectly mount the first piece of the two-part, double-thick baffle. The final result is a resonance-free, closed subwoofer enclosure that has been specially developed,to get the best performance out of the 8" Ultimax subwoofer from Dayton Audio. All that's left to doremains to refine it to match your decor or to paint it to stand out. Spezifications: Panel thickness: 19mm, Baffle 38mm plus braces - Panel material: Medium densityFiberboard (MDF) - Finished net cabinet volume (excluding the double thick baffle, theAussteifung und des Tieftonvolumens): 25L – External dimensions: approx.: W/H/D 330x360x330mm - Weight: 18kg Attention please note and for change requests please in the comment field or by email change requestsaddress: In all our enclosure kits, unless otherwise mentioned, terminal cutouts for our terminalT105 on the back of the housing, prefabricated! All housing kits (not glued or painted) are without rounded edges or chamfers! Chamfers or roundings are only made on "fully glued" assembled housings.

This FusionAmp can be the basis of e.g. a powerful active subwoofer or a one-way monitor.The FA251 has one powerful 250 Wrms Ncore® amplifier. Dimensions: 280 * 120 x 55 mm Weight: 725 gram (1340 gram incl. packing) Connections Analogue balanced XLR in and through Analogue unbalanced RCA input High level input USB 2.0 configuration interface Features 15 biquads per amplifier Three selectable presets for filters Source selection Signal detect Auto shutdown Clip protect Thermal protect Filter protection What is included in the box: The FA251 A printed copy of the user guide Speaker connection cables High-level input connector