Skip to main content Skip to search Skip to main navigation

Celine Lautsprecherbausatz

Celine Speaker Kit


CelineSpeaker kit

Test in Klang+Ton 1/23

The conclusion on the Celine from hifitest.de

High end and high dynamics in one – the Variant Céline is a bullseye!

Test on hifitest.de

2-Way Floorstanding Speaker

Assembly:

160mm Mundorf AMT U160W1.1-R, 270mm Woofer Dayton Audio RS270P-4, Crossover components
Mundorf Hi-Quality:

Properties:

"Celine" is Born! AMTU160 with front panel, Dayton Reference RS270P-4, and two passive radiators on the
Backside. Two chassis, ten octaves.

Celine is a two-way system of boundary areas.

The AMT from the German manufacturer Mundorf® with an effective diaphragm area of 68.1 cm² is the flagship of the new AMT U Series and, unlike conventional tweeter domes with diameters from 19 to 32 mm, thus a maximum of 8.04 cm², simply a superior solution.Mouthorf AMT membraneare unique in their form. It is characterized by its exceptionally high internal damping and extremely low distortion values. This is especially true for the odd harmonic distortions K3 and K5. The guarantee for the highest level reserves with enormous fine detailing of the ultra-light membrane. From 1500Hz, the AMT never plays in the foreground. It accurately and dynamically traces every small impulse of the music. Its companion is an RS270P-4 from the reference series by Dayton Audio. The aluminum die-cast basket houses a lightweight paper cone, and a phase plug centrally dominates the visual aspect. The lightweight paper cone was already chosen for the smaller sister model "Melodie 8018" in two sizes smaller, and it also impresses in the larger version with detailed midrange, impressive bass, and the overall performance delivered seamlessly both in coarse and fine dynamics. We are inclined to award Celine the label "Speaker for everything." It could in our rooms;

Small room 14m², acoustically dampened.

Large room 24m², acoustically little damped, little window area.

Second large room 35m², acoustically well-damped with lots of window space.

In all situations, loud or quiet, always impress with transistor, tube, and digital amplifiers.

Preferred in amplifiers, however, the strong guys, and can also handle loudness.

 

Scope of delivery:

-          Chassis

-          Passive membranes

-          High-End Terminal

-          Fastening screws

-          Cable (internal wiring)

-          Insulation material

-          Crossover components (Loose)

Die standard crossover are Mundorf; in the signal path: air coils, Mcap Evo capacitors, metal oxide
Resistors. As parallel component; Elko Rau, air coils, metal oxide resistors.

In the High End version; In the signal path: MCAP EVO Oil, Backlack air coils, MRESIST Classic resistors.
As parallel component: MCAP Classic, baked varnish and standard air coils, metal oxide resistors

In the scope of delivery, an impedance linearization is already included.

 

Celine active Hypex 122:

Scope of delivery.

Hypex FA122 Pre-configured with Crossover Programming!

Additional setup programming available for an extra charge!

Dayton Audio RS270P

Mundorf AMT U160

Dayton Audio DSA270-PR including additional weights

Insulation material

Screws

Internal wiring

The selected number refers to pieces,noa couple.

Properties
Breite: 360mm
Frequenzumfang: 27-28000Hz
Funktionsprinzip: Bassreflex (Passiv-Membran)
Gesamtimpedanz: 4 Ohm (Nom.)
Höhe: 1000mm
SPL: 90dB
Tiefe: 260mm
Data according to manufacturer. Errors and changes reserved.
Manufacturer "variant"
Related links of the manufacturer
Skip product gallery

Accessory Items

Outrigger OS-2M Lautsprecher Spikes
Outrigger OS-2M Lautsprecher Spikes

Dayton Audio OS-2M Outrigger Speaker Spike Set Medium with Black Steel Base 2 Pcs Improve the stability of your speakers while giving them a modern and professional look with Dayton Audio's M steel spiked outrigger set. Constructed of 4 mm thick steel, these wide spiked outriggers have a durable black powder-coated finish. With 4 mounting points per outrigger and heavy-duty spikes, each outrigger can support up to 200 lbs. Key Features Steel construction for strength and durability Coupling loudspeakers to a floor can improve clarity, imaging, and bass response Increases a speaker's footprint to create a more stable base Adjustable spikes and knurled locking knob make it easy to level speakers on uneven floors One-piece construction spans the width of the speaker for even weight distribution 14" width is perfect for speakers from 7" to 10-3/4" wide Dayton Audio OS-2M Outrigger Speaker Spike Set Medium with Black Steel Base 2 Pcs Give your speaker projects a professional look and more stable base with Dayton Audio's OS-2M outrigger set. By creating a wider base, the OS-2M outriggers can improve the stability of tall, narrow, and top-heavy speakers to keep them standing tall. In addition, the 1-1/2" heavy-duty adjustable spike is long enough to pierce through the thickest carpet and padding to rigidly couple your speaker to the subfloor below, along with further improving stability this coupling can noticeably improve clarity, stereo imaging and bass response. To keep your speakers level on even the most uneven floors the height of the spikes can be easily adjusted and then securely locked into place with the easy to turn knurled jam nut. Finally, constructed of one piece of 4 mm steel, the weight of the speaker is distributed evenly across the surface to handle up to 200 lbs. per outrigger. Note: For more detailed dimensions see mechanical drawing in the resources section.

Regular price: €79.00
Celine Gehäusebausatz
Celine Gehäusebausatz

Gehäuse CelineThe matching enclosure for our speaker kit "Celine".  

Regular price: From €22.00
AMT U160W WITH FRONT PANEL
AMT U160W WITH FRONT PANEL

4 Ohm - 55x175mm - Neodymium The AMT U160W1.1 combines the highest level reserves with the decisive quality features of the AMT U-series with Mundorf diaphragm: exceptionally low K3/K5 distortion, powerful music reproduction over the entire range of use and the fine detail typical of Mundorf AMT. This makes it the first choice whenever life-performance volume needs to be realised at long listening distances - such as with very large floorstanding speakers or in home cinema use. Due to its front panel geometry, it is ideally suited for stacking several tweeters vertically in a line. This places the AMT U160W1.1 on the borderline of sound reinforcement technology. The tweeters of our AMT U.series have become very popular among demanding DIY loudspeaker builders. To meet their demands for precise, uncomplicated front mounting and a high-quality finish, every U.Series model is now also supplied with an attractive black aluminium front panel. A precisely fitting cut-out in the back of the 6mm! thick panel ensures that the AMT motor unit is perfectly centred and can be integrated flush into the baffle with an enlarged contact surface.

Regular price: €399.00
Dayton Audio DS270-PR
Dayton Audio DS270-PR

Dayton Audio DS270-PR 10" Designer Series Passive Radiator The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. Dayton Audio DS270-PR 10" Designer Series Passive Radiator The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Shielded DVC line of subwoofers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems. Specifications: • Fs: 21.9 Hz • Vas: 3.73 cu. ft. • Qms: 3.98 • Cms: 0.60 mm/N • Rms: 3.1 kg/ • Mms: 88.4 g • Sd: 353 sq. cm. • Xmax: 11 mm • Dimensions: Overall diameter: 10.63", Cutout diameter: 8.94", Depth: 2.81". Note: Adding mass to the passive radiator will decrease Fs and increase Qms. Tip: As a general rule the passive radiator(s) should be able to move double the volume of air as the active woofer(s)/subwoofer(s) in the system. For example: A passive radiator system for a 10" woofer/subwoofer that has 10mm of X-max would require 2-10" passive radiators with 10mm of X-max. For single passive radiator systems, it is common to use a passive that is larger than the active woofer(s)/subwoofer(s).

Regular price: €46.95
Skip product gallery

Similar Items

Only 1 available
Melodie 8018 Lautsprecherbausatz
Melodie 8018 Lautsprecherbausatz

Melody 8018 Speaker KitMelody 8018 Klang + Ton 01/2021 2-Way Design Floorstanding Speaker Assembly: Mundorf AMTU80W1.1, Dayton Audio RS180p-4; Crossover components Mundorf Hi-Quality. Conclusion Klang+ Ton 01/2021 Hearing test And as confidently as in the measuring room, the Melodie 8018 also impresses in the listening test: Deep and powerful bass captivates the listener – you can build on such a foundation. The very low tones find an optimal mix of elasticity and hardness – a very successful combination, we think. The midrange is clear and seamlessly transitions into the equally defined high range. This has absolutely audiophile qualities, which can be slightly adjusted with the voltage divider before the AMT if greater sound quality is desired. We are thoroughly impressed with the extremely spatial and defined performance of the Melodie 8018..Thomas Schmitz Properties: Floor-standing speakers in a slim design silhouette for modern living style (possible close-to-wall placement).As a topping, you can choose an 8mm stainless steel base plate that provides stable support as an extra. Variant also delivers the cuttings and pre-milled fronts or complete kits, in MPX, raw MDF,Black or primed foil up to fully painted and assembled LS. Ihre hochwertigen Komponenten vereinen sich wunderbar zu einem Ganzen. Not a pretty player and not aPoet. She plays with what she is fed. Experience their music preserves as they are, withoutMistunings or discolorations disturb the sound experience. The Mundorf AMT from the brand new U-profile series shows what modern foil tweeters are capable ofleisten sind. Finest details, brilliant resolution, and dynamic treble behavior, without everintrusive or superficial, that is the supreme discipline of tweeters. Der Reference mid-bass driver with a powerful ferrite magnet, the stable die-cast basket with6 mounting holes that guarantee a firm hold and the coated lightweight paper membrane, theyguarantees the homogeneous sound unity and delivers powerful bass. The passive membranes areinstead of bass reflex tubes and do not tend to air flow noise when tuned low, andcreate tuning options to respond to room-related modes and room gain.

Regular price: €531.90
Celine Kompakt Lautsprecherbausatz
Celine Kompakt Lautsprecherbausatz

Celine Compact Speaker KitCeline Speaker Kit Test in Klang+Ton 1/23 (Standard Version) The conclusion on the Celine from hifitest.de (floorstanding version) High end and high dynamics in one – the Variant Céline is a bullseye! Test on hifitest.de 2-Way Compact Speaker Assembly: 160mm Mundorf AMT U160W1.1-R, 270mm Woofer Dayton Audio RS270P-4, Crossover componentsMundorf Hi-Quality: Properties: "Celine" is Born! AMTU160 with front panel, Dayton Reference RS270P-4, and two passive radiators on theBack. Two chassis, ten octaves. Also the compact version is convincing, the short or compact version includes, like the stand versionaround 62 liters. It delivers the same tonal performance as the stand version, only through thePossibility to design stand substructures variably, more flexible in setup. Celine is a two-way system of border areas. The AMT from the German manufacturer Mundorf® with an effective membrane area of 68.1 cm² is the flagship of the new AMT U Series and, unlike conventional tweeter domes with diameters from 19 to 32 mm, i.e., a maximum of 8.04 cm², simply a superior solution.Mundorf AMT membraneare unique in their form. It is characterized by its exceptionally high internal damping and extremely low distortion levels. This is especially true for the odd harmonic distortions K3 and K5. The guarantee for the highest level reserves with enormous detail of the ultra-light membrane. From 1500Hz, the AMT never takes center stage. It exemplarily and dynamically traces every little impulse of the music. Its companion is an RS270P-4 from the reference series by Dayton Audio. The aluminum die-cast basket houses a lightweight paper cone, and a phase plug centrally dominates the visual appearance. The lightweight paper cone was already chosen for the smaller sister model "Melodie 8018" in two sizes smaller, and it also impresses in the larger version with detailed midrange, impressive bass, and the overall performed presentation seamlessly both coarse and fine dynamics. We are inclined to attribute to Celine the label "speaker for everything." It was able to, in our rooms; Kleiner Raum 14m², acoustically dampened. Large room 24m², acoustically minimally damped, little window area. Second large room 35m², acoustically well damped with lots of window space. In all situations, loud or quiet, always convincing with transistor, tube, and digital amplifiers. Preferred for amplifiers are the strong guys, and can also handle loudness.   Scope of delivery: -          Chassis -          Passive Membranes -          High-End Terminal -          Fastening screws -          Cable (internal wiring) -          Insulation material -          Crossover components (Loose) Die standard-crossover are Mundorf; in the signal path: air coils, Mcap Evo capacitors, metal oxideResistors. As parallel component; Elko Rau, air coils, metal oxide resistors. In the High End version; In the signal path: MCAP EVO Oil, Backlack air coils, MRESIST Classic resistors.As parallel component: MCAP Classic, baked varnish and standard air coils, metal oxide resistors The delivery includes an impedance linearization.   Celine active Hypex 122: Scope of delivery. Hypex FA122 Pre-configured with Crossover Programming! Further setup programming available at an additional cost! Dayton Audio RS270P Mundorf AMT U160 Dayton Audio DSA270-PR including Additional Weights Insulation material Screws Internal wiring In the selected number, it is about pieces,nopair. This kit is compatible with both the floor-standing and compact speaker variants.

Regular price: €923.95
Celine Gehäusebausatz
Celine Gehäusebausatz

Gehäuse CelineThe matching enclosure for our speaker kit "Celine".  

Regular price: From €22.00