Ultimax18CB Kit/Bausatz

Dayton Audio UM18-22 18" Ultimax DVC Subwoofer 2 ohms Per Coil Dayton Audio’s Ultimax Series DVC subwoofers are purpose-built to move tons of air and create clean, articulate, fast bass. Experience the apex of subwoofer design! Key Features 18" design for enormous air movement Over 2" of total cone travel! 1000 watts RMS power handling Dual mirror-imaged linear spiders ensure distortion-free excursion Dual 2 ohm, 2-layer copper voice coils Large vented pole piece and under-spider venting Dayton Audio UM18-22 18" Ultimax DVC Subwoofer 2 ohms Per Coil If you want outrageous amounts of bass, you gotta move some air With the UM18-22 Ultimax 18" driver, Dayton Audio has taken everything about the respected Dayton Audio Ultimax subwoofers to the extreme! Providing over 2" of peak-to-peak excursion, the Ultimax 18 sweeps over six liters of air with each stroke! Truly not for the faint of heart! An audio bulldozer with the finesse of a sports car Like the rest of the Ultimax series, the UM18-22 plays it clean, low, fast, and LOUD. Designed to excel in either sealed or vented enclosures, it features an ultra-powerful triple stack of high-grade ferrite ceramic magnets for ultra-high force and exceptional control, plus dual aluminum shorting rings above and below the magnetic gap for minimized inductance, "faster"-sounding bass response, and perfect magnetic symmetry. The voice coil diameter has been increased to 3 inches, for even more thermal dissipation area that allows the 18" model to withstand 1,000 watts of punishing bass power continuously without thermal fatigue. Dual 2-ohm voice coils allow for stereo 2 ohm operation, or mono operation in 1 ohm or 4 ohm configurations, for true design flexibility. Built to produce massive low frequency output and keep on doing it The huge 18" Nomex honeycomb composite curved cone features woven fiberglass outer skins for the ultimate in rigidity and resistance to damage, while the "tall-boy" rubber surround with integral gasket supports extreme stroke with linearity and durability. Dual 8" spiders are mirror-imaged, to keep the 2" of excursion completely linear and provide cancellation of distortion due to compliance asymmetry, for ultra-low mechanical distortion even at the outer limits of travel. And it's all held in perfect alignment by a rigid cast aluminium 12-spoke frame, for stability in any mounting position. Car audio recommended alignments: Sealed 3 cubic ft. (net internal, not including driver) for an f3 of 32 Hz with a Qtc of .78 Vented 4 cubic ft. (net internal, not including driver or vent ) tuned to 22 Hz, with 2 flared vents 4" diameter by 32" long, for an f3 of 24 Hz Home theater/stereo recommended alignments Sealed (home theater/music): 4 cubic ft. (net internal, not including driver) for an f3 of 31 Hz, f10 of 18 Hz with a Qtc of 0.72 Sealed (music): 7 cubic ft. (net internal, not including driver) for an f3 of 31 Hz, f10 of 15.8 Hz with a Qtc of 0.62 Vented (home theater): 8 cubic ft. (net internal, not including driver or vent) tuned to 20 Hz, with 3 flared vents 4" diameter by 28.5" long, for an f3 of 18 Hz Vented (infra-sub): 12 cubic ft. (net internal, not including driver or vent) tuned to 15.5 Hz, with 3 flared vents 4" diameter by 32" long, for an f3 of 15 Hz Infinite Baffle: Approved Note: All specifications are derived with voice coils wired in series.

Ultimax 18 CB Cabinet KitUltimax 18 CB Cabinet Kit Suitable for assembly:Dayton Audio UM18-22 120L Flat Pack Enclosure Kit About the CaseThis clever enclosure was specifically designed for the Dayton Audio 18" Ultimax subwoofer. During the CNC manufacturing process, grooves and joints are cut into the back panel to fit the boardsprecisely align. A unique two-piece strut provides superior stiffness withoutperformance of the subwoofer. Both side walls feature 19mm rabbeted extensionswith cutouts to perfectly mount the first piece of the two-part, double-thick baffle. Das Endergebnis ist ein resonanzfreies, geschlossenes Subwoofergehäuse, das speziell entwickelt wurde, umgetting the best performance out of the 18" Ultimax subwoofer from Dayton Audio. All that's left to doremains, is to refine it to match your decor or to paint it to stand out. Spezifikationen:- Panel thickness: 19mm, Baffle 38mm - Panel material: Medium Density Fiberboard (MDF) -Finished net enclosure volume (minus the double thick baffle, the bracing, and theTieftonvolumens): 120L - External dimensions approx.: 580mm H x 520mm W x 520mm D - Weight: 35 Kg. Attention please note and for change requests please in the comment field or by email change requestsaddress: In all our enclosure kits, unless otherwise mentioned, terminal cutouts for our terminalT105 on the back of the housing, prefabricated! All housing kits (not glued or painted) are without rounded edges or chamfers! Chamfers or rounds are only made on fully assembled housings.  

Ultimax18 Studio-Line Subwoofer High Cabinet Kitextra Flat 18" 46cm High-Performance HiFi and Home Theater Subwoofer.Ultimax Studio-Line Subwoofer, Flat HiFi and Home Cinema Subwoofer Kit and Finished Enclosure Bundles forIn-Wall, On-Wall, Baffle-Wall, DBA, SBA.Closed subwoofers for active operation, in the popular sizes 12" (30cm), 15" (40cm), 18" (46cm).Powerful subwoofers with minimal enclosure depth. This way, they lose only the slightest room depth.The enclosures are the ideal solution for space-limited applications. Ideal for standard rack works 50 and 60cm.Maximum membrane area and immense lifting power, as well as high load capacity, stand for the best subwoofers.the HiFi and home cinema class. Optimally tuned closed enclosures for the chassis parameters.Comprehensive reinforcements ensure a stable housing.Anschlussterminal Speakon NL4 socket, the professional solution, is positioned centrally on the side, and thusuniversally mountable on the left or right. Other connection solutions are also available upon request.as well as plate amp cutouts.The housings are rabbeted and grooved and precisely manufactured by our professional CNC. This guaranteesa nearly flawless assembly. Our experienced carpentry team is a well-coordinated team, in the construction ofLoudspeaker enclosures. The extra flat subwoofers are also offered as a pre-glued complete package.

Ultimax18 Studio-Line Subwoofer Low Cabinet Kitextra Flat 18" 46cm High-Performance HiFi and Home Theater Subwoofer.Ultimax Studio-Line Subwoofer, Flat HiFi and Home Cinema Subwoofer Kit and Finished Enclosure Bundles forIn-Wall, On-Wall, Baffle-Wall, DBA, SBA.Closed subwoofers for active operation, in the popular sizes 12" (30cm), 15" (40cm), 18" (46cm).Powerful subwoofers with minimal enclosure depth. This way, they lose only minimal space depth.The enclosures are the ideal solution for space-limited applications. Ideal for standard racks 50 and 60cm.Maximal membrane area and immense lifting power as well as high resilience stand for the best subwoofers.the HiFi and home cinema class. Optimally tuned closed enclosures to match the chassis parameters.Comprehensive reinforcements ensure a stable housing.Anschlussterminal Speakon NL4 socket, the professional solution, is positioned centrally on the side, and thusuniversally mountable on the left or right. Other connection solutions are also possible upon request.as well as plate amp cutouts.The housings are rabbeted and grooved and precisely manufactured by our professional CNC. This guaranteesa nearly flawless assembly. Our experienced carpentry team is a well-coordinated team in the construction ofSpeaker enclosures. The extra flat subwoofers are also offered as a pre-glued complete package.