Montagesatz für BST-2
€14.95
Available in 14 days, delivery time 1-3 days
Mounting Kit for BST-2
Das BST-2 mounting kit is specifically designed for the secure attachment of your BST-2 bass shaker. The
Bracket has 8 mm holes and requires 6 mm or 8 mm countersunk screws. Additionally, you need four
M4 screws and nuts with a length of 14–16 mm to attach the BST-2 to the bracket. With
this mounting kit allows you to install your BST-2 safely and reliably exactly where you
need. Check the hole spacing diagram to ensure it meets your requirements
corresponds, and enjoy a clean and reliable installation of your bass shaker. In the
Delivery includes four M4 screws and nuts (14–16 mm long) to attach the BST-2 to the bracket.
to attach.
Accessory Items
Dayton Audio BST-2 Tactile Bass Shaker 35 Watt Elevate your home theater and gaming systems to a whole new level with Dayton Audio's BST-2 bass shaker. The BST-2 tactile transducer allows you to feel ultra-low bass frequencies without requiring the extremely high SPL levels that are necessary when using just a subwoofer. Add Dayton Audio's BST-2 bass shaker to any sound system to truly feel what you have been missing. Key Features Increase the realism of home theater and gaming systems for a more immersive experience Add low frequency tactile impact without ridiculous SPL levels Cast aluminum housing dissipates heat for reliable performance Attached 24” leads for easy connections in hard to reach installations Easy to install on any flat surface Dayton Audio BST-2 Tactile Bass Shaker 35 Watt The human ear has the ability to hear a wide range of sounds, however, some sound is simply too low to hear and must be felt through the body. Feeling this extremely low frequency sound adds a new dimension to your listening, gaming, and movie experiences. Dayton Audio's BST-2 tactile transducer allows you to feel everything you have been missing without requiring giant subwoofers and outrageous SPL levels. By installing a BST-2 to chairs or a couch you can create a more immersive experience by augmenting the existing low frequency output of your speakers or headphones with powerful tactile feedback. Accentuating effects like the power of an explosion, a dinosaur footstep's rumble, the impact of a punch, and even subtle nuances of distant thunder, Dayton Audio's BTS-2 will make you feel like you are in the middle of the action. The BST-2 has 4 mounting holes to make it easy to install securely onto any flat surface. The mounting plate includes a foam gasket to ensure that there are no buzzes or rattles even under the most intense vibration. A dual suspension design keeps the mass moving in a linear fashion to deliver an incredible amount of tactile feedback without unwanted noise. Excess heat from the voice coil is dissipated through the rugged cast aluminum housing for a long life and reliable performance. Additional Notes and Suggestions: • 80 Hz or under low pass crossover is recommended to reduce undesired high frequency output • Recommended Amplifiers: Dayton Audio SA70 for one to two BST-2 bass shakers, Dayton Audio APA150 for four BTS-2 bass shakers (wired in series-parallel for a 4 ohm load), and a Dayton Audio BSA-200 for six BST-2 bass shakers (wired in series-parallel for a 6 ohm load). Specifications: High Grade Aluminum Housing Frequency response: 10-80 Hz Fs (unmounted): 30 Hz Impedance: 4 Ohms Power handling: 35 Watts RMS Peak force: 25 lbs. per ft. Weight: 2.6 lbs Dimensions: 5.15" diameter x 2.16" high Mounting holes 5" center to center