Dayton Audio SD315A-88 12" DVC Subwoofer
The Dayton Audio SD315A-88 12" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today.
Key Features
-
Works equally well in sealed or vented enclosures
-
Attractive gasket-less design
-
Long-life rubber surround for years of reliable service
-
Excellent bottom octave performance
Dayton Audio SD315A-88 12" DVC Subwoofer
The Dayton Audio SD315A-88 12" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today. Dayton Audio DVC Series woofers were designed to offer the maximum performance-per-dollar. The speakers feature poly coated paper cones, wide rubber surrounds, large dual 8 ohm voice coils, vented pole pieces, and bumped back plates. Their healthy Xmax, long-throw construction, and dual voice coils make them perfect for any economical yet high-performing subwoofer speaker system.
Note: This is a dual voice coil driver, 8 ohms per coil. Specifications measured with the voice coils wired in parallel for a 4 ohm load.
Artikel-Nr.: | 295-488 |
---|---|
Außenmaß: | 314mm |
Bohrlochanzahl: | 5 |
DC Resistance (Re): | 3,1 Ohm |
EAN: | 844632088711 |
Eff. Membranfläche (Sd): | 522,8cm² |
Effektive Bewegte Masse (Mms): | 1092 |
Einbautiefe: | 130 mm |
Einbauöffnung: | 272mm |
Einheit: | Stück |
Elektrische Güte (Qes): | 37 |
Frequenzbereich: | 24 bis 2,000Hz |
Gesamtgüte (Qts): | 33 |
Größe: | 12 " |
Impedanz (Z): | 4 Ohm |
Korbmaterial: | Stahl |
Kraftfaktor (BL): | 11,86T·m |
Lineare Auslenkung (Xmax): | 7mm |
Magnet: | Ferrit |
Marke: | Dayton Audio |
Mechanische Güte (Qms): | 354 |
Membranmaterial: | beschichtetes Papier |
Modell: | SD315A-88 |
Nachgiebigkeit (Cms): | 0,4mm/N |
Nennbelastbarkeit: | 120 Watt |
Resonanzfrequenz (fs): | 24,2Hz |
Schwingspulendurchmesser: | 50,8 mm |
Schwingspulenind. (Le): | 1,5mH |
Schwingspulenkörper: | Aluminium |
Schwingspulenmaterial: | Kupfer |
Sensitivität: | 93,75dB 2,83V/1m |
Sickenmaterial: | Gummi |
Äquivalentvolumen (Vas): | 151,778 l |
