Dayton Audio SD270A-88
Dayton Audio SD270A-88 10" DVC Subwoofer
The Dayton Audio SD270A-88 10" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today.
Key Features
-
Works equally well in sealed or vented enclosures
-
Attractive gasket-less design
-
Long-life rubber surround for years of reliable service
-
Excellent bottom octave performance
Dayton Audio SD270A-88 10" DVC Subwoofer
The Dayton Audio SD270A-88 10" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today. Dayton Audio DVC Series woofers were designed to offer the maximum performance-per-dollar. The speakers feature poly coated paper cones, wide rubber surrounds, large dual 8 ohm voice coils, vented pole pieces, and bumped back plates.Their healthy Xmax, long-throw construction, and dual voice coils make them perfect for any economical yet high-performing subwoofer speaker system.
| Artikel-Nr.: | 295-486 |
|---|---|
| Außenmaß: | 270mm |
| Bohrlochanzahl: | 5 |
| DC Resistance (Re): | 3,16 Ohm |
| EAN: | 844632088704 |
| Eff. Membranfläche (Sd): | 346,4cm² |
| Effektive Bewegte Masse (Mms): | 57,7 |
| Einbautiefe: | 109 mm |
| Einbauöffnung: | 227,1mm |
| Einheit: | Stück |
| Elektrische Güte (Qes): | 0,50 |
| Frequenzbereich: | 26 bis 2,000Hz |
| Gesamtgüte (Qts): | 0,43 |
| Größe: | 10 " |
| Impedanz (Z): | 16 Ohm, VC Reihe 4 Ohm VC Parallel |
| Kennschalldruck: | 87,8 |
| Korbmaterial: | Stahl |
| Kraftfaktor (BL): | 7,8T·m |
| Lineare Auslenkung (Xmax): | 6mm |
| Magnet: | Ferrit |
| Marke: | Dayton Audio |
| Mechanische Güte (Qms): | 3,23 |
| Membranmaterial: | beschichtetes Papier |
| Modell: | SD270A-88 |
| Nachgiebigkeit (Cms): | 0,64mm/N |
| Nennbelastbarkeit: | 80 Watt |
| Resonanzfrequenz (fs): | 26,2Hz |
| Schwingspulendurchmesser: | 38,1 mm |
| Schwingspulenind. (Le): | 1,12mH |
| Schwingspulenkörper: | Aluminium |
| Schwingspulenmaterial: | Kupfer |
| Sensitivität: | 87,8dB 2,83V/1m |
| Sickenmaterial: | Gummi |
| Äquivalentvolumen (Vas): | 107,604 l |