Dayton Audio DC130B-8
Dayton Audio DC130B-8 5-1/4" Classic Woofer Speaker Dayton Audio's DC130B-8 5-1/4" Classic Series woofer is perfect for compact 2-way designs as well as use in multiples or transmission lines. Key Features Sturdy, easy-to-countersink round steel frame Coated paper cone provides smooth response and reduced cone breakup Aluminum voice coil former for high power handling Large diameter flat spider and good Xmax for clean bass Suitable for sealed or vented enclosures Dayton Audio DC130B-8 5-1/4" Classic Woofer Speaker One of the main design goals at Dayton Audio is to create loudspeakers that can achieve high levels of performance at reasonable prices. The Dayton Audio DC130B-8 5-1/4" woofer is a great example of this approach. It features a non-pressed treated paper cone, rubber half-roll surround, ASV voice coil, coated cloth dust cap, and excellent low frequency response.
Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter
Smooth-as-silk sound at an affordable price makes the Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter an ideal choice for most home DIY projects. Key Features Treated silk dome for smooth frequency response Damped rear chambers for reduced resonance Ferrofluid cooled voice coil for outstanding power handling and better damping Ideal replacement for Dayton Audio DC28FS-8 1-1/8" Silk Dome Shielded Tweeter The Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter is a great option for DIY speaker enthusiasts, as it offers amazing performance at an unbelievable price point. Featuring treated silk dome, this tweeter delivers smooth sound, while the damped rear chamber diminishes the resonance for better clarity. Thanks to the Ferrofluid cooled voice coil, this tweeter has excellent capabilities to handle high power. Replacement diaphragm 275-072
Dayton Audio DCS165-4
DCS165-4 6-1/2" Classic Subwoofer 4 Ohm Capable of impressive low end when installed in enclosures of less than 0.5 cubic feet, the DCS165-4 6-1/2" subwoofer from Dayton Audio's Classic Series is the perfect low cost solution for compact low frequency designs. Key Features 4-layer VC with polyimide former allows high power handling Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression Copper pole piece cap minimizes inductance Rigid non-pressed treated paper/Kevlar cone with rubber surround Great for home and automotive applications Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm If you want outrageous amounts of bass, you gotta move some air Dayton Audio's rugged DCS165-4 6-1/2" subwoofer has all of the performance-enhancing attributes you would expect from a larger high-output subwoofer. With a vented pole piece and 4 ohm, 4-layer voice coil, this driver can handle up 100 watt RMS. The non-pressed paper cone is reinforced with Kevlar to increase stiffness, which promotes linear travel through the limits of its excursion. In addition, the pole piece includes a copper cap that keeps inductance to a minimum. The DCS165-4 driver is ideal for use in small multimedia speakers, portable speakers, or even automotive systems where space is at a minimum.
Dayton Audio DC130B-4
Dayton Audio DC130B-4 5-1/4" Classic Woofer Speaker The Dayton Audio DC130B-4 5-1/4" woofer is a 4 ohm, round frame version of the popular Classic Series DC130 drivers. Key Features Sturdy, easy-to-countersink round steel frame 4 ohm impedance offers alternative load possibilities Coated paper cone provides smooth response and reduced cone breakup Aluminum VC former and vented pole piece for high power handling Large diameter flat spider and good Xmax for clean bass Suitable for sealed or vented enclosures Dayton Audio DC130B-4 5-1/4" Classic Woofer Speaker One of the main design goals at Dayton Audio is to create loudspeakers that can achieve high levels of performance at reasonable prices. The Dayton Audio DC130B-4 5-1/4" woofer is a great example of this approach. It features a non-pressed treated paper cone, rubber half-roll surround, ASV voice coil, vented pole piece, coated cloth dust cap, and excellent low frequency response.
Dayton Audio DC160-8
Dayton Audio DC160-8 6-1/2" Classic Woofer Choose the Dayton Audio DC160-8 Classic Series 6-1/2" woofer for use as a great replacement bookshelf speaker, midbass in 3-way designs, or even as a small subwoofer. Key Features Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Low 34 Hz free-air resonance Dayton Audio DC160-8 6-1/2" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC160-8 6-1/2" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. You can even be use the DC160-8 as a small subwoofer! The excellent low frequency performance will amaze you. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio DC380-8
Dayton Audio DC380-8 15" Classic Woofer The Dayton Audio Classic Series 15" woofer is excellent as a replacement driver or for new system design and construction. The versatile set of parameters makes it suitable for sealed or vented enclosure designs. Key Features Treated paper cone provides smooth response and low energy storage Aluminum former, vented pole piece, and porous dustcap for high power handling Large diameter flat spider and healthy Xmax for clean bass Bring those old vintage speakers back to life Dayton Audio DC380-8 15" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC380-8 15" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.35 allows the DC300-8 to work well in both sealed and ported speaker enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio DC250-8
Dayton Audio DC250-8 10" Classic Woofer Choose the Dayton Audio DC250-8 Classic Series 10" woofer for use as a great replacement speaker for large format 2-way and 3-way, ported or sealed loudspeakers. Key Features Best price/performance value available anywhere Excellent low frequency capabilities Rubber surround and vented pole piece Dayton Audio DC250-8 10" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC250-8 10" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.38 allows the DC300-8 to work well in both sealed and ported speaker enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio DC200-8
Dayton Audio DC200-8 8" Classic Woofer The Dayton Audio DC200-8 Classic Series 8" woofer achieves high levels of performance at a reasonable price. It's perfect as the basis of a custom speaker project, or for repairs and upgrades. Key Features Great price/performance ratio Treated non-pressed paper cone with rubber surround Vented pole piece for better power handling Clean, balanced sound quality Dayton Audio DC200-8 8" Classic Woofer Dayton Audio's DC200-8 Classic Series 8" woofer offers one of the best price/performance values available anywhere. This DC200-8 8" speaker, and in fact the whole Classic Series, has a non-pressed treated paper cone, ASV voice coil, vented pole piece, rubber surround, coated cloth dust cap, and excellent low frequency performance.
Dayton Audio DC300-8
Dayton Audio DC300-8 12" Classic Woofer Choose the Dayton Audio DC300-8 Classic Series 12" woofer for use as a great replacement speaker for large format 2-way and 3-way, ported or sealed loudspeakers. Key Features Works great as a general replacement woofer Excellent price/performance ratio Bring those old vintage speakers back to life Long lasting rubber surround increases the life of the driver Dayton Audio DC300-8 12" Classic Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC300-8 12" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. Smooth frequency response and extended bass performance make this driver ideal for use in large format two-way and classic three-way loudspeaker designs. A Qts of 0.33 allows the DC300-8 produce incredible low frequency extension in vented enclosures or tight response with a powerful kick in sealed enclosures. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio DC160-4
Dayton Audio DC160-4 6-1/2" Classic Woofer Speaker Designed to offer premium results on a moderate budget, the Dayton Audio DC160-4 6-1/2" 4 ohm woofer provides solid bass and clean midrange response when used in sealed, vented, or transmission line speaker systems. Key Features Sturdy, easy-to-countersink round steel frame 4 ohm impedance offers alternative load possibilities Coated paper cone provides smooth response and reduced cone breakup Aluminum VC former and vented pole piece for high power handling Large diameter flat spider and good Xmax for clean bass Suitable for sealed or vented enclosures Dayton Audio DC160-4 6-1/2" Classic Woofer Speaker One of the main design goals at Dayton Audio is to create loudspeakers that can achieve high levels of performance at reasonable prices. The Dayton Audio DC160-4 6-1/2" woofer is a great example of this approach. It features a non-pressed treated paper cone, rubber half-roll surround, ASV voice coil, vented pole piece, coated cloth dust cap, and excellent low frequency response.
Dayton Audio DC28FS-8 1-1/8" Silk Dome Shielded Tweeter
Shielded version of the famous Dayton Audio Silk Dome Tweeter. 1-1/8" silk dome with ferrofluid cooling and fully shielded motor structure. Key Features Offers smooth and detailed high frequency performance Magnetically shielded Ferrofluid cooled voice coil The shielded version of the famous Dayton Audio Silk Dome, this tweeter offers the same performance but in a CRT-safe design. Features a 1-1/8" silk dome with a ferrofluid cooled voice coil for superior damping. Compare it to drivers costing $30 to $40 more! Recommended for crossover points as low as 1,800 Hz, making it ideal for most 2-way speaker designs. 5 year warranty. Specifications: • Power handling: 50 watts RMS/100 watts max • VCdia: 1.14" • Le: 0.09 mH • Impedance: 8 ohms • Re: 5.6 ohms • Frequency response: 1,600-20,000 Hz • Fs: 813 Hz • SPL: 89 dB 1W/1m • Qms: 1.97 • Qes: 1.6 • Qts: 0.88 • Dimensions: Overall diameter: 4.33", Cutout diameter: 3.07", Depth: 1.42".
Dayton Audio DCS205-4
Dayton Audio DCS205-4 8" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS205-4 8" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio DCS305-4
Dayton Audio DCS305-4 Dayton's DCS305-4 delivers the ultimate in low bass with supreme level stability down to 20 Hertz. Review Hobby HiFi 1/2022 Dayton Audio DCS305-4 12" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS305-4 12" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio DCS385-4
Dayton Audio DCS385-4 15" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS385-4 15" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio DC25T-8 1" Titanium Dome Tweeter
Features a ferro fluid cooled aluminum voice coil and a rubber surround. The 1" titanium dome and precision phase lens, provide very natural sounding high frequency reproduction. Key Features Great replacement for the Dayton DC25TS-8 1" Titanium Dome Shielded Tweeter
Dayton Audio DC28F-8RD 1-1/8" Silk Replacement Diaphragm
Replacement Diaphragm for Dayton Audio DC28F Series tweeters
Dayton Audio DC28FT-8 mit abgeschnittener Frontplatte
DC28FT-8 1-1/8" Silk Dome Truncated Tweeter 8 Ohm Superior European design and performance at a fraction of the cost of similar audiophile silk dome tweeters! Product Highlights Same performance specs as the popular DC28F "Silkies" Truncated faceplates permit close driver spacing Damped rear chamber makes low crossover points possible Treated silk dome offers smooth response with airy highs Matches or exceeds the performance of many high-dollar tweeters Extremely popular for DIY projects; used in many designs Great replacement for the Dayton DC28FST-8 1-1/8" Silk Dome Truncated Shielded Tweeter Superior European design and performance at a fraction of the cost of similar audiophile silk dome tweeters! Clinically tested and compared to Morel with amazingly similar results! Recommended for crossover points as low as 1800 Hz!
Dayton Audio DC130A-8
Dayton Audio DC130BS-4 5-1/4" Classic Shielded Woofer 4 Ohm The Dayton Audio Classic woofers are excellent as replacements or for new system design and construction. With impressive bass performance and smooth overall response, they are popular in many DIY loudspeaker projects. Key Features Treated paper cone provides smooth response and low energy storage Aluminum former and porous dustcap for high power handling Large diameter flat spider and good Xmax for clean bass Dayton Audio DC130BS-4 5-1/4" Classic Shielded Woofer 4 Ohm The Dayton Audio Classic woofers are excellent as replacements or for new system design and construction. Their versatile set of parameters make them suitable for sealed or vented enclosure designs. With impressive bass performance and smooth overall response, they are popular in many DIY loudspeaker projects.
Dayton Audio DCS255-4
Dayton Audio DCS255-4 10" Classic Subwoofer 4 Ohm Review by Hobby HiFi 1/2023 Dayton Audio's DCS255-4 delivers convincingly deep and extremely stable low bass reproduction from a pleasingly compact bass reflex cabinet. Bernd Timmermanns The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Key Features Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Five year warranty Dayton Audio DCS255-4 10" Classic Subwoofer 4 Ohm The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former.
Dayton Audio DC130AS-8
Dayton Audio DC130AS-8 5-1/4" Classic Shielded Woofer Choose the Dayton Audio DC130AS-8 Classic Series 5-1/4" woofer for use as a great replacement bookshelf speaker, midrange in 3-way designs, or even as a small subwoofer. The shielded design allows for use near tube TVs and focuses the magnetic flux in the gap for high sensitivity. Key Features Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Shielded design increases performance and allows it to be used near tube TVs 4 ohm impedance for series pair use in MTMs and center channel speakers Dayton Audio DC130AS-8 5-1/4" Classic Shielded Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC130AS-8 shielded 5-1/4" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. You can even be use the DC130AS-8 as a small subwoofer! The excellent low frequency performance will amaze you. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil increases power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio DC130BS-4
Dayton Audio DC130BS-4 5-1/4" Classic Shielded Woofer 4 Ohm The Dayton Audio Classic woofers are excellent as replacements or for new system design and construction. With impressive bass performance and smooth overall response, they are popular in many DIY loudspeaker projects. Key Features Treated paper cone provides smooth response and low energy storage Aluminum former and porous dustcap for high power handling Large diameter flat spider and good Xmax for clean bass Dayton Audio DC130BS-4 5-1/4" Classic Shielded Woofer 4 Ohm The Dayton Audio Classic woofers are excellent as replacements or for new system design and construction. Their versatile set of parameters make them suitable for sealed or vented enclosure designs. With impressive bass performance and smooth overall response, they are popular in many DIY loudspeaker projects.
Dayton Audio DC130BS-8
Dayton Audio DC130BS-8 5-1/4" Classic Shielded Woofer Choose the Dayton Audio DC130BS-8 Classic Series 5-1/4" shielded woofer for use as a great replacement bookshelf speaker, midbass in 3-way designs, or even as a small subwoofer. Key Features Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Shielded design increases performance and allows it to be used near tube TVs Dayton Audio DC130BS-8 5-1/4" Classic Shielded Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC130BS-8 5-1/4" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. You can even be use the DC130BS-8 as a small subwoofer! The excellent low frequency performance will amaze you. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil increases power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.
Dayton Audio DC160S-4
Dayton Audio DC160S-4 6-1/2" Classic Shielded Woofer 4 Ohm Choose the Dayton Audio DC160S-4 Classic Series 6-1/2" shielded woofer for use as a great replacement bookshelf speaker, midbass in 3-way designs, or even as a small subwoofer. Key Features Treated paper cone provides smooth response and low energy storage Aluminum former, vented pole piece, and porous dustcap for high power handling Large diameter flat spider and good Xmax for clean bass Dayton Audio DC160S-4 6-1/2" Classic Shielded Woofer 4 Ohm Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC160S-4 6-1/2" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. You can even be use the DC160S-4 as a small subwoofer! The excellent low frequency performance will amaze you. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate. The 4 ohm impedance of the DC160S-4 makes it perfect for use in MTMs and center channel speakers.
Dayton Audio DC160S-8
Dayton Audio DC160S-8 6-1/2" Classic Shielded Woofer Choose the Dayton Audio DC160S-8 Classic Series 6-1/2" shielded woofer for use as a great replacement bookshelf speaker, midbass in 3-way designs, or even as a small subwoofer. Key Features Great bang-for-the-buck driver can be used as a woofer, midbass, or even as a small subwoofer! Smooth frequency response up to 2 kHz and great bass response Rubber surround, aluminum voice coil, and extended bump plate Low 32 Hz free-air resonance Dayton Audio DC160S-8 6-1/2" Classic Shielded Woofer Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC160S-8 6-1/2" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. You can even be use the DC160S-8 as a small subwoofer! The excellent low frequency performance will amaze you. A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate.