Dayton Audio DAEX25CT-4
Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX25CT-4 is designed by Dayton Audio with a 1" voice coil for 10 watt RMS power handling, for more output than most of the other coin-type exciters. Key Features Small size; just under 2" diameter, about 9/16" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 1" voice coil for 10 watt RMS power handling Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm Dayton Audio's 25 mm DAEX25CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil allows for more input power for higher output applications while maintaining a slim-line form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 10 watts RMS • VCdia: 25 mm • Nominal impedance: 4 ohms • Re: 3.6 ohms • Le: 0.07 mH • Fs (uncoupled): 306 Hz • Dimensions: 1.89" (48 mm) dia. x 0.59" (15 mm) H • Adhesive dimensions: 1.06" (27 mm) outside diameter • Weight: 74.6 grams.
Dayton Audio DAEX30HESF-4
Dayton Audio DAEX30HESF-4 High Efficiency Steered Flux Exciter with Shielding 30mm 40W 4 Ohm The DAEX30HESF-4 30 mm steered high flux exciter is one of the most powerful in Dayton Audio's line of exciters capable of handling up to 40 watts. A pre-attached 3M VHB adhesive ring combines with four screw-down mounting tabs for maximum energy transfer. Key Features High output exciter design handles up to 40 watts RMS Specially designed neodymium motor and proprietary voice coil 3M™ VHB™ adhesive ring with four mounting holes Low inductance (only 0.3 mH) motor for extended response Dayton Audio DAEX30HESF-4 High Efficiency Steered Flux Exciter with Shielding 30mm 40W 4 Ohm Dayton Audio's DAEX30HESF-4 steered high flux exciter is one of our most powerful. It has a specially designed neodymium motor system that imparts strong forces on even the most rigid surface for maximum output. For use with medium sized amplifiers, this steered high flux exciter incorporates a 4 ohm voice coil to extract maximum power. A wide frequency response is permitted due to this exciter's low inductance of only 0.3 mH. Four threaded screw holes are integrated into the exciter's shell and combine with a 3M VHB (Very High Bond) adhesive, permitting this exciter to be securely coupled to a wide range of materials, even upside-down mounting and attaching to moving objects. Two solder tabs offer quick, permanent wire attachment. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 40 watts RMS • VCdia: 30 mm • Nominal impedance: 4 ohms • Re: 3.8 ohms • Le: 0.31 mH • Fs: 300 Hz • Dimensions: 2.25" dia.(2.75" across mounting tabs) x 1.125" H • Adhesive dimensions: 1.25" outside diameter • Weight: 158 grams.
Dayton Audio DAEX9CT-4
Dayton Audio DAEX9CT-4 Coin Type 9mm Exciter 0.5W 4 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX9CT-4 is the smallest of the Dayton Audio Exciters and is designed to turn small surfaces into a hidden sound source. Key Features Super small size; less than an inch in diameter, less than 3/8" high 4-ohm impedance for use with small, Class D amplifiers Turns almost any surface into a speaker Pre-applied 3M™ VHB™ adhesive for quick, secure installation Rare-earth neodymium motor Dayton Audio DAEX9CT-4 Coin Type 9mm Exciter 0.5W 4 Ohm Dayton Audio's 9 mm DAEX9CT-4 coin-type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's extremely small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Its 4-ohm nominal impedance facilitates the use of series and series-parallel wired arrays for a highly focused, minimum dispersion sound pattern. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 0.5 watts RMS • VCdia: 9 mm • Nominal impedance: 4 ohms • Re: 3.6 ohms • Le: 0.02 mH @ 10 kHz • Fs: 1,200 Hz • Dimensions: 0.83" (20.9 mm) dia. x 0.33" (8.5 mm) H • Adhesive dimensions: 0.43" (10.8 mm) outside diameter, 0.030" (7.7 mm) inside diameter • Weight: 3.9 grams.
Wallflower Q Lautsprecherbausatz + Gehäuse Bundle
Wallflower Q Speaker Kit + Enclosure BundleWallflower Q 1-Way Broadband Wall/Floor Speaker Assembly: W4-655; Frequency Crossover Components Mundorf Hi-Quality: Properties: Hifi and/or Surround Sound for impressive movie moments. Low space requirement. Living room cinema basefor your future In-Wall or On-Wall. Space-saving OnWall desk solution with full sound range,Inconspicuously unobtrusive living room/dining room/lobby sound system. A proven 10cm full-range speaker inflat housing design. In two form proposals. The sound character is characterized by arich, powerful bass, a homogeneous mid-high tone performance, and a perfect stage imaging withbroadband typical spatiality. This kit is ideally suited for the most diverseApplications and in places where there is a lack of space. From the simple stereo placement in theLiving room and as TV sound enhancement in the home cinema, for secondary room sound or accompaniment ofPresentations in the studio. As wall speakers in two formats, as a floor-standing box with stand base additionor flush-mounted. Zu unseren Bausätzen wollen wir nichts dem Zufall überlassen! Deshalb können bei uns alle für den Aufbaubenötigten Materialien zum Lautsprecher-Bausatz: Chassis W4-655, crossover components, screws,Cables, insulation material, connection terminal, as well as the housing kits can be ordered. The latter are somanufactured so that assembly is easy even for the inexperienced. Gestalterisch sind Ihren Fantasien und Vorstellungen keine Grenzen gesetzt: paint, veneer,foil, wallpaper – you decide and thus give your new speakers aindividual appearance. All in all, this system offers you a sensationally affordable and creative solution for every music-and film sound enthusiasts who, despite having a small apartment, do not want to miss out on good sound and/or the certainCinema experience would like to do without. Wallflower – whether rectangular or square – strikingly sonorous. Schedule an appointment and let us convince you on site in Marburg. Technical Specifications: Frequenzumfang: f-3dB: 50-18000Hz SPL: 86dB Gesamtimpedanz: 8 Ohm ((Nom.) Funktionsprinzip: Bass reflex B/H/T: 486x486x86mm (Recommended Case Dimensions) Scope of delivery: Screws Chassis Terminal Cable (Inside) Insulation fleece Crossover Components (Loose) Enclosure Kit MDF Raw The housing in the kit version in raw MDF is included! In the selected number, it is about pieces,nota couple.
CSS Audio SDX10
CSS Audio SDX10Exactly like the SDX12, the SDX10 is also powered by a patented XBL² motor, making it part ofthe most precise 25cm (10 inch) long-throw woofers available. With the XBL² motor, the SDX10,exactly like its bigger brother, with extremely low distortion values and thus enables a rarebelonged to clear and nuanced bass reproduction. An Xmax of 36 mm (peak-to-peak) enables above thathinaus maximum dynamic capability. Features Carbon fiber reinforced paper diaphragm for high stiffness and good internal damping properties Semi-progressive centering for better linearity Butyl Rubber Surround Aluminum and copper short-circuit rings for low distortion values and minimal inductance rise Die casting basket High power, XBL² Motor 6-layer 60.6mm voice coil diameter 750W RMS, 1500W Peak thermal load capacity Parameter Fs: 26.0Hz SPL: 89 dB @ 2.83V/1M Nom Imp 4 ohm Re: 3.5 Ohms Mms 112 g BL: 11.8 NA Vas: 53 Liters Qes: 0.47 Qms: 4.0 Qts: 0.42 Le: 1.42 mH Xmax: 18.4 mm Sd: 330 cm²
Up2Stream Pro V3
Airplay 2 Compatible: Up2Stream HD DAC lets you stream audio throughout your house via Apple Airplay 2. Using Airplay 2 from your iOS device, you can easily stream music to multiple Apple audio devices at the same time. 192khz/24bits Hi-Res Audio: Up2stream HD DAC supports 1:1 high-fidelity lossless 192khz/24bits audio output. What's more, the high-performance ESS 9038Q2M plays a big role in sound quality. Enjoy high quality sound from high performance hardware with your stereo system. Spotify Connect & Tidal Connect: With Spotify Connect and Tidal connect compatibility, you can stream music directly from Spotify or Tidal without using our 4Stream app. Build Your Wireless Streaming Audio System: Perfect to add dual band WiFi, Airplay 2, Spotify Connect, Tidal Connect, and Aptx HD Bluetooth 5.0 wireless capability to your DIY audio projects. Build a wireless speaker, wireless streamer, or convert your traditional stereo system into an advanced wireless multiroom streaming system. Bring Multiroom Capabilities to Your Next Project: Our wide range of Up2Stream boards are small enough to fit in all kinds of audio projects. Add an amplified streamer inside speaker boxes, or tiny receiver boards inside home theater amps. Their size and powerful connectivity bring new life to vintage gear and new ideas for your next DIY build. *All Arylic products are compatible with each other for multiroom installations. Stream with HD Music: Up2Stream HD DAC is able to stream with Qobuz HD and Tidal HiFi to give you the true high-resolution audio experience. More HD music will be updated and supported in the future. Along with this HD music, it also supports Spotify, Amazon Music, Deezer, Internet Radio, iHeartRadio, Napster, and more. Enhanced Up2Stream: The Up2Stream HD DAC is easily expandable, you can add new features to better fit your project. For example, you can add a display panel(coming in the future) to add a visual of the system, an acrylic case for protection, you can also add a button board, an IR receiver, and more. You can find all these expansion boards in our Accessories section. Powerful 4STREAM App: Choose your music source and control playback, set EQ, control multiroom/independent playback, select preset content, control alarm clock, WiFi settings, update firmware, and more... All the useful features you need in our free 4STREAM App for iOS & Android. Bring Airplay 2 & Brilliant Sound To Your Whole House Up2Stream HD DAC is a high quality mulitroom wireless audio preamplifier board that supports Airplay 2, APTX HD, Sportify Connect and Tidal Connect. It uses ESS9038Q2M and has excellent sound performance to output 192kHz/24bit High-Res audio. With Up2Stream HD DAC you can enjoy your audiophile home audio system throughout your home. Airplay 2 Compatible Up2Stream HD DAC lets you stream audio throughout your house via Apple Airplay 2. Using Airplay 2 from your iOS device, you can easily stream music to multiple Apple audio devices at the same time. 192khz/24bits Hi-Res Audio Up2stream HD DAC supports 1:1 high-fidelity lossless 192khz/24bits audio output. What's more, the high-performance ESS 9038Q2M plays a big role for sound quality. Enjoy high quality sound from high performance hardware with your stereo system. Spotify Connect & Tidal Connect With Spotify connect and Tidal connect compatibility, you can stream music directly from Spotify or Tidal without using our 4Stream app. Bring Multiroom Capabilities to Your Next Project Our wide range of Up2Stream boards are small enough to fit in all kinds of audio projects. Add an amplified streamer inside speaker boxes, or tiny receiver boards inside home theater amps. Their size and powerful connectivity brings new life to vintage gear and new ideas for your next DIY build. *All Arylic products are compatible with each other for multiroom installations. Stream with HD Music Up2Stream HD DAC is able to stream with Qobuz HD and Tidal HiFi to give you the true high resolution audio experience. More HD music will be update and support in the future. Along with this HD music, it also support Spotify, Amazon Music, Deezer, Internet Radio, iHeartRadio, Napster and more. Enhanced Up2Stream The Up2Stream HD DAC is easily expaniable, you can add new features to better fit your project. For example, you can add a display panel to add visal of the system, acrylic case for protection, you can also add button board, volume knob, IR receiver and more. You can find all these expansion board in our Accessories section. Powerful 4stream App Choose your music source and control playback, set EQ, control multiroom/independent playback, manage playlists, control alarm clock, WiFi settings, update firmware and more... All the useful features you need in our free 4STREAM App for iOS & Android. Remote Control The included remote can control all your Arylic models within a ~15 meter/50 foot range. Package Includes Up2Stream HD DAC, Internal Antenna (WiFi & Bluetooth), User Manual, PH2.0 Aux Cable(3 Pin).
Dayton Audio LW150-4
Dayton Audio LW150-4 6" Low Profile Woofer 4 Ohms The Dayton Audio LW150-4 6" woofer's unique venting allows zero-clearance installation in ultra-low profile applications. Solid bass output can be produced from spaces never thought possible. Key Features Very low profile woofer fits in tight spots Flat woven glass-fiber/honeycomb aluminum composite cone Dual sandwiched spiders and S-shaped surround enhance linear travel capability Large 1-1/4" 4-layer voice coil and optimized T-pole gap geometry Peripheral holes in spider landing enable zero-clearance venting in shallow enclosures Great for on-wall, in-wall, or car audio applications Dayton Audio LW150-4 6" Low Profile Woofer 4 Ohms The unique and versatile Dayton Audio LW150-4 6" woofer was designed for space limited, minimum depth applications. Its low-profile frame and unique venting permit the back of the woofer to be placed directly against cabinet walls or even embedded (countersunk) into the cabinet, resulting in an enclosure less than 1-1/2" deep. Great match for today's ultra-thin TVs or use as a down firing subwoofer in a low powered system, low-frequency down-firing driver in a center channel/monitor stand, or bookshelf stand.
Arylic A30+ Wireless Mini Multiroom Stereo Amplifier
Add Wireless Streaming To Your Audio Gear The A30+ is one of the most cost effective and compact wireless streaming amplifiers, allowing you to stream high quality stereo audio to your passive speakers via your choice of WiFi or Ethernet. Stream directly from Online Streaming Serices, or via Airplay, Bluetooth5.0 and SpotifyConnect. 30W x2 power output is perfect for your desktop, den, or dorm. Add additional Arylic devices to build a multiroom system, and manage and control all your Arylic devices in one app (4STREAM)! Multiroom Audio System Mix and match any combination of Arylic products to create a custom multiroom system and play the same music throughout your home, send different sources to each room at the same time, or create your own custom-defined multiroom zones... All are controlled via our 4stream App. Compact Stereo Amplifier The compact and slim size is the perfect fit for building a wireless audio system for your desktop, den, or dorm. The 30W x 2 power output will fill your room with music. Simple Setup, Easy to Use No complicated wiring, no difficult setup steps. Convenient control via our 4STREAM APP including quick WiFi pairing during setup, creates a better listening experience. Brilliant Sound Streamed Directly From Your Favorite Providers Spotify, Amazon Music, Tidal, Qobuz, Deezer, Napster, TuneIn, Internet Radio, iHeart Radio, QQ Music, QQ FM. The A30+ connects directly to your online streaming providers to play high quality audio, avoiding Bluetooth bottlenecks and compression. Tune Like An Expert Fine tune your listening experience with our exclusive ACPWorkbench tuning tool. Find the perfect sound for each channel with EQ, Bass Enhancement, Advanced DSP effects, Gain, Pregain and more. Powerful 4stream App Choose your music source and control playback, set EQ, control multiroom/independent playback, manage playlists, control alarm clock, WiFi settings, update firmware and more... All the useful features you need in our free 4STREAM App for iOS & Android. Remote Control The included remote can control all your Arylic models within a ~15 meter/50 foot range. Web & PC Control Control your devices via browser from any PC, tablet, or other device, no app required. Or stream music using any software that supports Airplay, Spotify Connect, UPNP or DLNA protocols, including iTunes, Spotify, Musicbee and more. Package Includes A30+, User Manual, Remote, 18V 4A DC Power Adapter, External Antennas (Bluetooth & WiFi), 2-1 RCA Cable, Screw Driver, 4 Pin Phoenix Connector (for speakers).
Dayton Audio PN470-8
Dayton Audio PN470-8 18” NEO Series Pro Woofer with 4” Voice Coil Dayton Audio's PN470-8 18" pro woofer is designed to deliver reliable low frequency operation with extreme output capability and minimal power compression. Weighing only 16.5 lbs, and featuring a 4" inside-outside wound voice coil, powerful neodymium motor, distortion reducing copper pole cap, great excursion capability, and high power handling, the PN470-8 will produce extreme output levels with low distortion without breaking the bank or your back. Key Features Weighs only 16.5 lbs. for easy installation and transportation High efficiency (97 dB SPL at 2.83V/m) for amazing output capability 4" diameter inside/outside wound copper voice coil on glass fiber former Large copper cap for inductance control and low distortion Powerful FEA optimized Neodymium motor system (Bl over 25 TM) Generous 6.5 mm of Xmax with 48 mm peak-to-peak excursion before damage Durable fiberglass reinforced ribbed paper cone for rigidity and natural sound Dayton Audio PN470-8 18" NEO Series Pro Woofer with 4" Voice Coil 8 Ohm Dayton Audio left no boxes unchecked on the PN470-8 woofer. It features high power handling, 4" inner and outer wound voice coil, glass fiber former, powerful FEA optimized Neodymium motor, ribbed paper cone, and a copper cap on top of the extended pole piece. Thanks to the lightweight motor assembly, the PN470-8 weighs in at only 16.5 lbs, 30% to 50% lighter than a comparable ferrite driver, making it "Roadie approved" and perfect for mobile DJs and portable PA systems. The PN470-8 is an ideal driver for any high output 2-way and 3-way speaker systems, bass bins, or horn loaded designs. Lightweight but Powerful Motor Assembly The lightweight but powerful neodymium motor assembly on the PN470-8 has been FEA optimized to provide a combination of low distortion and high efficiency. With the large neodymium magnet mounted inside the voice coil nearly all of the magnetic strength is concentrated into the magnetic gap providing up to 40% better utilization than conventional motor designs. The extended pole piece includes a large copper cap helping to lower distortion and linearize inductance. Rugged Construction and Suspension To stand up to the use and abuse of the professional sound environment Dayton Audio made sure the PN470-8 can take a beating. The cast aluminum frame uses 8 wide spokes to firmly support the motor assembly, and the thick mounting flange is reinforced to create an incredibly solid mounting surface. The cone, constructed of thick paper for a natural response, includes glass fiber reinforcement and uses a ribbed design offering additional structural support. Supporting the cone is a heavy spider with integrated silver tinsel leads and triple roll treated cloth surround, both designed for high excursion applications allowing the PN470-8 to handle short bursts of excessive power without damage High Power Handling and Low Power Compression Along with high efficiency, you need a lot of power to achieve extreme SPL levels. Capable of handling up to 800 watts RMS and 1,600 watt peaks, the PN470-8 can take the heat. The 4" voice coil uses a vented fiberglass former with an inside/outside winding configuration which doubles the coil's exposed surface area for improved heat dissipation. The motor assembly includes a large pole vent along with 8 large peripheral vents in the voice coil gap to keep fresh air moving across the coil keeping temperature at a minimum. Finally, the frame has venting behind the spider with integrated heatsinks removing as much heat as possible from the sensitive motor and voice coil. The Dayton Audio PN470-8 is used in the following kit: 18" Professional Subwoofer Kit with Dayton Audio PN470-8 and Knock-Down Enclosure With powerful bass output capabilities, Dayton Audio's 18" professional subwoofer kit proves that size does matter. Combining the Dayton Audio PN470-8 18" 800 watt RMS driver with a rugged enclosure flat pack, this subwoofer is sure to fill your low frequency needs. Capable of response down to 29 Hz and continuous output levels up to 127 dB, this kit will provide accurate but earth shaking low end.
Bold North Audio BWF-6503
Key Features Light weight, rigid carbon fiber cone with rubber surround 2.6 mm, Klippel verified minimum Xmax Vented, square cast aluminum basket 1” voice coil, edge-wound copper on Kapton form Wide frequency range, 60 to 12kHz 0.9 kg, (2.1 lb) net weight This 6.5” premium woofer provides both value and performance. A custom fabricated woven carbon fiber cone allows for a rigid piston and fast transient response. A stylish yet sturdy round cast aluminum basket provides easy front mounting in an enclosure. The carefully designed aluminum phase plug eliminates the need for the additional mass of a dust cap and reduces lateral wave energy interference which causes unwanted peaks and dips in the frequency response.
CSS Audio LDW7
The LDW7 is an excellent, small woofer-midrange that easily competes with drivers much more expensive. Low distortion provides very detailed music reproduction. Favorable specifications allow deep bass in a modest enclosure. Large, linear excursion allows for uncompressed dynamics.HighlightsSymmetrical drive structure for optimal drive force distributionBuilt-in aluminum field stabilization ring reduces harmonic distortionCopper pole cap reduces voice coil inductance and minimizes deviations of inductance relative to voice coil positionNew paper-fiberglass diaphragm for improved stabilityVented voice coil former reduces distortion and compressionBlack fiberglass voice coil former reduces mechanical losses1½" large voice coil allows for better control and power handlingLow-loss suspension (high Qm) for better reproduction of detail and dynamicsConex centering provides better durability under extreme conditionsVented die-cast aluminum basket reduces airflow velocities and flow noiseGold-plated connectors ensure long-term interference-free connection80W RMS, 200W peak
Dayton Audio DBPP-SI Double Binding Post Plate Silver Anodized B-Ware
Dayton Audio DBPP-SI Double Binding Post Plate Silver Anodized B-StockB-Stock: Light scratches on surface Dayton Audio DBPP-SI Double Binding Post Plate Silver Anodized
Lautsprecher Anschluss Terminal Rund 75mm Paar
Restposten!Lautsprecher Aunschlussfeld Rund.Außendurchmesser: 75mmEinbaudurchmesser: 48mmFlanshstärke. 2,2mmGesammttiefe: 22mm
Arylic H400
Stream To 4 Zones - Independently, Or In Sync: Add Direct Streaming, Airplay, and Spotify Connect capability to your existing active wired speakers, amplifiers, preamps and recievers. Stream and control 4 different audio outputs at once, controlled wirelessly via our 4stream App. Multiroom Audio System: Mix and match any combination of Arylic Streamers to create a custom multiroom system and play the same music throughout your home, send different sources to each room at the same time, or create your own custom-defined multiroom zones... All controlled via our 4stream App. Brilliant Sound Streamed Directly From Your Favorite Providers: Spotify, Amazon Music, Tidal, Qobuz, Deezer, Napster, TuneIn, Internet Radio, iHeart Radio, QQ Music, QQ FM. The M400 connects directly to your online streaming providers to play high quality audio, avoiding Bluetooth bottlenecks and compression. Stream Any Kind of Audio On One Device: In addition to Direct Streaming from Online Streaming Services, Airplay, and Spotify Connect, there are multiple digital and analog input and output ports allowing you to connect most of the audio devices in your home.
Dayton Audio PA460-8
Dayton Audio PA460-8 18” Pro Woofer Dayton Audio PA Series Pro Woofers are a great upgrade for musical instrument or sound reinforcement cabinets, and also excel in custom-built speaker systems. Key Features Strong, low-mass carbon fiber impregnated paper cone I-beam rolled edge 1.5 mm steel frame Low distortion motor system w/copper cap Powerful 80 oz. ceramic ferrite magnet Vented pole piece/vented voice coil gap improve thermal management Black motor parts and black polyimide voice coil former dissipate heat Bumped back plate for unrestricted excursion Dayton Audio PA460-8 18" Pro Woofer Dayton Audio PA Series Pro Woofers are a great upgrade for musical instrument or sound reinforcement cabinets, and also excel in custom-built speaker systems. High power handling, smooth response, low distortion, deep punchy bass, and rugged reliability are the features that set PA Series woofers apart from other drivers – premium performance, but value priced.
Dayton Audio ME825W 8" 2-Way In-Wall Speaker Paar
Dayton Audio ME825W 8" Micro-Edge 2-Way In-Wall Speaker Pair The Micro-Edge™ series in-wall and in-ceiling speakers from Dayton Audio combine sophisticated, minimalist styling with robust acoustical engineering and design features, for outstanding home theater and musical performance. The largest in-wall speaker in the line, model ME825W, delivers maximum sonic impact with deep bass, natural vocals, and crisp highs. Key Features Versatile multi-purpose L/R/surround speaker for home theater or music Contemporary Micro-Edge™ grills with magnetic grill retention Large 8" woven Kevlar cone woofer and 1" pivoting silk dome tweeter Mounts vertically or horizontally Room integration switch with selectable 0/-3/-6 dB treble adjustment Optimized 12 dB/octave crossover with exclusive tuning by Dayton Audio Dayton Audio ME825W 8" Micro-Edge 2-Way In-Wall Speaker Pair Dayton Audio’s Micro-Edge™ speakers were created to combine the high-quality sonic performance of a premium free-standing speaker with sleek, contemporary in-wall styling, for a thoroughly modern take on the in-wall speaker. The ME825W model is the largest in the line, and features an 8" diameter woofer that handles high power for maximum sonic punch without sacrificing clarity. The low-profile perforated grill with ultra-slim Micro-Edge™ frame almost disappears into the wall entirely, and is easily paintable to match its surroundings. The 8" woofer features an oversized magnet assembly and a woven black Kevlar cone that provides excellent transient 'snap' and crisp vocal clarity along with deep, high-impact bass, and the 1" silk-dome tweeter delivers rich detail that never becomes harsh, even at high volumes. The pivoting tweeter mount lets you target the best treble performance directly at the listening position, and the three-position room integration switch lets you decrease treble output if desired, for the best balance with your room’s natural acoustics. All Dayton Audio Micro-Edge™ (ME-series) speakers are timbre-matched for a seamless and consistent home theater experience when used together. For horizontal installation (e.g. center channel), model ME525MTM is recommended. Specifications: • Power handling: 80 watts RMS/160 watts max • Impedance: 8 ohms • Frequency response: 40-20,000 Hz • Sensitivity: 88 dB 1W/1m (±3 dB) • Dimensions: 14-1/4" H x 10-1/4" W x 3-7/8" D • Cutout size: 12-7/8" H x 8-3/4" W • Sold in pairs.
Dayton Audio MA455
Dayton Audio MA455 Multi-Zone On-Wall 4 Channel Amplifier 220W The Dayton Audio MA455 Multi-Zone On-Wall Amplifier provides four channels of distributed audio functionality in a convenient design. Featuring four input channels, each of the MA455's channels is assignable to one of four zones for a multi-room audio system. The compact design, complete with a lockable security cover, makes the MA455 perfect for small businesses, stores, restaurants, bars, and office spaces. We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability. Key Features Four input, four zone amplifier perfect for multi-room audio in offices, businesses, restaurants, and retail stores Compact and easy to install on-wall design with a lockable security cover to prevent tampering Individualized sonic character with built-in channel tone, volume, source, and EQ control for each input Features an internal media player with USB, SD, Bluetooth, and FM radio playback options that can be assigned to any combination of zones On board playback and IR remote control functionality provides total system control With a Dayton Audio 5 year warranty, it’s more than a guarantee, it’s a promise Dayton Audio MA455 Multi-Zone On-Wall 4 Channel Amplifier 220W The Dayton Audio MA455 delivers multi-zone Class AB amplification in an easy-to-use, set-and-forget design. With each of the amp's four input channels assignable to one of four zones, the MA455 is ideal for small businesses, stores, or restaurants that need a multi-room audio system. In a compact and secure housing, the MA455 provides reliable audio performance and a convenient and straightforward interface. Versatility Across Zones Inputs Delivering four input channels, the MA455 gives you the ability to connect multiple sources for custom multi-zone audio. Each input channel provides an RCA and 1/4" line input as well as individual bass and treble controls. Streaming In addition to flexible input options, the MA455 has a built-in media player that includes USB and SD MMC ports, Bluetooth, and FM radio. The media player can be assigned to any combination of the four output zones and features playback controls via the front panel and included IR remote control. Outputs The MA455 not only has versatile input options but also gives you flexibility in output options. Each zone has a mono RCA line out for use with an external amp and a barrier strip connector to connect directly to your speakers. Needing a total speaker impedance of at least 4 ohms per zone, the MA455 allows you to integrate into almost any existing speaker system. Tailor Your Sound Each input channel has an individual volume, bass, and treble controls, giving you control over the sound sources. Accessible via the included IR remote control, the MA455 also provides seven EQ presets including normal, rock, pop, classical, jazz, country, and bass. When using smaller speakers, the MA455 also has an 80 Hz high-pass filter for each zone output to restrict source bandwidth delivered to your speakers. Secure, Compact Design The all-in-one design of the MA455 delivers all of the functionality that you need for multi-zone audio, all housed in a compact on-wall form factor. With the streamlined design, the amplifier is ideal for set-and-forget installations. In addition to the compact size, the MA455 also features a lockable security cover so that you can keep your settings consistent without fear of tampering. Simplify Your Install Placing emphasis on simplicity and high performance, Dayton Audio has engineered the MA455 with ease of use in mind. The on-wall design and set-and-forget functionality are an installers dream that save time and money. Packed with all of the features you need, the MA455 is the complete all-in-one amplifier for multi-zone audio. Flexibility and Function With a vast array of input options, the MA455 can accept many audio sources such as Wi-Fi audio streaming devices, AV receivers, computers, hand held devices, and microphones. The ability to add a microphone via the 1/4" jack allows you to ensure that announcements are heard on the zones you want. This feature is ideal for paging mics for offices, bars, restaurants, and stores. Delivering on All of Your Audio Requirement The MA455 delivers all of the functionality and quality you would expect from Dayton Audio in a simplified design. With convenience and function at the forefront of design, the MA455 is perfect for use in restaurants, bars, small businesses, stores, office spaces, and other applications in need of easy-to-use multi-zone audio.
Dayton Audio RSS315HE-22
Dayton Audio RSS315HE-22 12” Reference Series High Excursion Subwoofer 2+2 Ohm Dayton Audio’s RSS315HE-22 12" Reference Series high excursion dual voice coil subwoofer sets a new standard for controlled bass response from small enclosures. With a rigid aluminum cone, large copper shorting ring, and thick aluminum sleeve the RSS315HE-22 delivers ultra-low distortion. A 3” voice coil, massive motor assembly, and 25 mm Xmax gives it the capability to produce remarkable output levels. This massive 12” is perfect for anyone looking for maximum low frequency response, earth shaking impact, and incredibly clean output. Key Features Designed for maximum excursion and extended low frequency response Copper ring and thick aluminum sleeve minimize inductance to deliver ultra-low distortion Large 3” diameter voice coil is wound on a spiral cut aluminum former allowing high power handling Thick aluminum cone and dustcap improves heat dissipation to keep power compression under control Optimized venting for maximum airflow across the voice coil with extremely quiet operation Dual spiders and high roll surround reduce rocking modes during high displacement Dual 2 ohm voice coils give you the ability to get maximum power out of most amplifiers Dayton Audio RSS315HE-22 12" Reference Series High Excursion Subwoofer 2+2 ohm The RSS315HE-22 12" Reference Series high excursion subwoofer from Dayton Audio will generate incredible bass response with unparalleled detail, control, and SPL capability. Engineered for maximum linear displacement with extensive inductance control, this massive subwoofer produces unmatched low frequency extension and high output with the lowest possible distortion. Optimized for small enclosures and with dual 2-ohm voice coils, the RSS315HE-22 is flexible enough to add breath taking bass to high output home and car audio designs. Remarkably powerful low distortion motor In order to keep precise control of the cone when driven to high excursion, the RSS315HE-22 requires an incredibly powerful motor. A stack of 3 high energy Y-35 ferrite magnets is used to provide the force needed while allowing ample clearance for the voice coil to travel without impacting the back plate. A copper ring and thick aluminum sleeve helps minimize stored energy and lower inductance as the coil travels through the motor. This massive motor assembly gives the RSS315HE-22 the ability to produce extremely low distortion and accurate response even when driven to the limits of its 50 mm peak-to-peak excursion. Amazing power handling with low power compression Driving the cone is a large 3” diameter voice coil wound on a thick aluminum former that is capable of dissipating enough heat to handle up to 800 watts RMS. A spiral spit in the former minimizes the eddy currents that are induced into any conductive former, to further lower inductance and distortion. The venting through the voice coil former and pole piece delivers ample airflow across the coil while minimizing turbulence to allow quiet operation when pushed to high displacement. In addition, the copper ring and aluminum sleeve improve heat transfer to the pole piece and magnet assembly, more efficiently absorbing heat away from the coil. All of this gives the RSS315HE-22 the ability to reliably handle tons of power without suffering from significant power compression, even when pushed hard for extended periods. Optimized suspension for maximum linear stroke In order to accommodate the 25 mm Xmax, the RSS315HE-22 required flexible suspension that permits linear movement to keep the voice coil centered even when driven beyond the limits of excursion. A custom tooled high roll surround maintains surface area and allows an incredible amount of travel without tightening up or distorting. Dual progressive spiders with integrated tinsel leads support the cone and voice coil. The spiders are optimized to begin restricting movement just as the driver reaches Xmax to protect from catastrophic damage in the event of excessive dynamic peaks. In addition, the spiders have significant space between them to keep the coil centered in the tight magnetic gap. Every aspect of the suspension on the RSS315HE-22 has been designed to reliably deliver extreme excursion capability without adding significant distortion. Aluminum cone and dustcap… a Reference series tradition To visually fit in with the rest of the popular Reference Series Subwoofers, the RSS315HE-22 uses a rigid anodized aluminum cone and dustcap. The cone is significantly thicker to withstand the force that will be applied with such a powerful motor and to increase mass for a low Fs. Thanks to the rigidity and natural damping properties of aluminum, any cone breakup is pushed well outside of the pass band giving the RSS315HE-22 exceptionally flat response, even throughout the mid-bass and lower midrange frequencies. In addition, aluminum is an excellent conductor of heat, turning the entire cone and dustcap assembly into a large heatsink that effectively wicks heat away from the voice coil to further control power compression. Incredible flexibility to add powerful bass to any system The specs of the RSS315HE-22 have been balanced to operate in a variety of situations. Extended low frequency extension makes it ideal for subwoofer use in home audio and theater systems. With extremely small enclosure requirements, the RSS315HE-22 is also an excellent choice for use in high output car audio designs. Also, dual 2-ohm voice coils allow for stereo 2-ohm or mono 1-ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a more common 4-ohm load for greater amplifier compatibility. All of the Reference Series HE drivers are built to provide amazing low frequency response with unbelievable power, impact, and detail. Car audio recommended alignments: Sealed (maximum sound quality): 0.90 cubic ft. (gross internal, including driver) for an f3 of 55 Hz with a Qtc of .65 Passive radiator (sound quality with extended low frequency extension): 1.40 cubic ft. (gross internal, including driver and passive), using the RSS390-PR 15” passive radiator with all 7 disks of added mass, for an f3 of 30 Hz Vented (maximum SPL): 2.87 cubic ft. (gross internal, including driver and ports) tuned to 40 Hz, with 2 x 4” diameter x 12” long flared vents, for an f3 of 32 Hz with a +6 dB peak at 43 Hz. Home theater/stereo recommended alignments: Sealed (home theater/music): 1.6 cubic ft. (gross internal, including driver) for an f3 of 55 Hz, f10 of 27 Hz with a Qtc of 0.55 Vented (home theater/music): 2.8 cubic ft. (gross internal, including driver and port) tuned to 22 Hz, with a 4” diameter x 23” long flared vent, for an f3 of 22 Hz (may have port chuffing at high output) Passive radiator: 2 cubic ft. (gross internal, including driver and passive), using the RSS390-PR 15” passive radiator with all 7 disks of added mass, for an f3 of 25 Hz Infinite Baffle: Not recommended Note: All specifications measured with the voice coils wired in series.
Bold North Audio BDT-2901
29 MM NEO-CLASSICAL DOME TWEETER, DESIGNED AND BUILT IN THE USA.This tweeter was designed by transducer engineers with decades of experience and built by highly skilled manufacturing personnel. It is the only dome tweeter on the market designed and assembled in the USA and fully verified by Klippel. The BDT-2901 (78036) tweeter is the result of engineers' and audiophiles' desire for a precise 29mm dome tweeter with a low cross-over point. Experience crisp high-end frequencies with an overall smooth performance, free from the metallic ringing produced by titanium dome tweeters. High-energy neodymium ring magnet for high sensitivity. Copper pole cap for low inductance and extended high frequency response Large rear chamber for low resonance and lower crossover point 29 mm Kurt Mueller silk dome cone 8 Ohm, 91 dB SPL Designed and manufactured in the USA Bold North Audio products are the most precise, engineered transducers on the market. Each design requires Klippel vibration analysis to verify key components for optimum audio performance. Although we rely heavily on objective science, we know that speakers must tell the musical truth above all else. Our engineers, musicians and recording studio veterans are the final judges of whether a design is worthy of the Bold North Audio brand. All Bold North Audio products are assembled in Minnesota, with parts sourced from around the world to achieve the highest combination of performance, consistency and customer value.
Bold North Audio BMW-4001
Key Features Light weight, rigid carbon fiber cone with rubber surround 2.6 mm, Klippel verified minimum Xmax Vented, square cast aluminum basket 1” voice coil, edge-wound copper on Kapton form Wide frequency range, 60 to 12kHz 0.9 kg, (2.1 lb) net weight This 4" Bass/mid-range is appropriate for a wide range of high-end audio systems, whether 2-way bookshelf speaker, a multi-driver floor standing speaker or a professional line array. A rigid, but light weight carbon fiber cone along with an edge wound copper voice coil, combine for excellent transient response and an extended and controlled top end roll-off. The frame is heavy duty, aluminum die cast with venting below the flat spider and through the center of the magnet structure to avoid air turbulence and noise. This is a premium, well-crafted speaker designed to bring music to life.
Bold North Audio BWF-1001
The BWF-1001 (82131), 10” premium subwoofer creates great low frequency output for professional and high-end audio applications. Reliability, high power handling and long throw is achieved with a 4-layer copper voice coil in a dual ferrite magnet design. The cone is a proprietary treated cone for both enhanced damping and water resistance. A rubber surround provides both high compliance and stability for the suspension. Connection is made via gold plated, spring type connectors. Included is a rubber mounting gasket which both conceals screws and seals the driver when front mounted. This gasket is removeable. This subwoofer a solid foundation for any sound system that needs top tier bass. See model BWF-1002 (82132) for a similar driver with a Hemp fiber cone and durable foam surround. 13 mm linear excursion (BL) Low 27 Hz resonant frequency 10” (272 mm) 12 spoke cast aluminum basket 150 watts, 5 ohms, 86 dB SPL 2”, four-layer copper voice coil, 5 ohm impedance Dual ferrite magnet allowing for long throw Fiber cone with a proprietary damping treat and NBR rubber edge Bold North Audio products are the most accurate, engineered audio transducers available. Each design receives Klippel vibrational test analyses to verify the key parts of optimal audio performance. While we rely heavily on objective science to lead us, we understand that most of all speakers need to tell the musical truth. Our engineers, musicians, and recording studio veterans are the final judges of when a design is worthy of the Bold North Audio brand. All Bold North Audio products are assembled in Minnesota, with parts sourced from around the world to produce the highest combination of performance, consistency, and customer value.
Faital Pro 6FE200-4
Faital Pro 6FE200-4 Nominal Specifications Nominal Diameter 160 mm (6 in) Overall Diameter 167.4 mm (6.59 in) Bolt Circle Diameter 154 mm (6.06 in) Baffle Cutout Diameter 144 mm (5.67 in) Depth 77 mm (3.03 in) Flange and Gasket Thickness 8 mm (0.31 in) Net Weight 2 kg (4.4 lb) Shipping Box(Single Carton Box) 190 x 185 x 103 mm (7.5 x 7.3 x 4.1 in) Shipping Weight 2.2 kg (4.9 lb) Technical Parameters Nominal Impedance 4 Ohm Minimum Impedance 3.6 Ohm AES Power Handling (1) 130 W Maximum Power Handling (2) 260 W Sensitivity (1W/1m) 95 dB Frequency Range 85÷6000 Hz Voice Coil Diameter 37 mm (1.46 in) Winding Material Al Former Material Kapton Winding Depth 11.9 mm (0.47 in) Magnetic Gap Depth 8 mm (0.31 in) Flux Density 1 T Magnet Ferrite Ring Basket Material Steel Demodulation No Cone Surround (3) M-Roll NET Air Volume filled by Loudspeaker 0.45 dm^3 (0.016 ft^3) Spider Profile 1x constant height waves Thiele and small parameters Fs 120 Hz Re 3 Ohm Qes 0.45 Qms 6.2 Qts 0.42 Vas 4.3 dm^3 (0.15 ft^3) Sd 131 cm^2 (20.3 in^2) Xmax (4) 4.62 mm Xdamage (5) 10.4 mm Mms 9.7 g Bl 7 N/A Le 0.20 mH Mmd 8.0 g Cms 0.18 mm/N Rms 1.2 kg/s Eta Zero 1.61 % EBP 267 Hz PART NUMBER (P/N) Faston Terminals - 4 Ohm Version 01604055 Notes: (1) 2 Hours Test According to AES 2-1984 Rev. 2003 (2) Maximum power is defined as 3dB greater than nominal power. (3) Treated Polycotton (4) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3) (5) Maximum excursion before permanent damage
Abacus Ampollo Dolifet silber - Neuwertiger Rückläufer
Abacus Ampollo Dolifet silver - Like-new returnIt is a customer return within the 14-day right of withdrawal.The device is technically and visually flawless and originally packaged. Features```html <!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8"> <meta name="viewport" content="width=device-width, initial-scale=1.0"> <title>Document</title> </head> <body> <h1>Welcome to our website!</h1> <p>This is a paragraph with some text.</p> <ul> <li>First item</li> <li>Second item</li> <li>Third item</li> </ul> <a href="#">Click here for more information</a> </body> </html> ``` Reference amplifiers in Dolifet technology (Drain-Output Load-Independent Field Effect Transistor) Usable as a power amplifier or integrated amplifier Cinch and XLR input switchable IR remote control in full metal housing (ON/OFF, Volume, Source selection) Elaborate and ultra-stable full aluminum housing Sophisticated protection mechanismsInrush Current Limiting (Soft-Start)Overload protection (automatically reduces the volume when triggered)DC offset protection (protects the speakers from dangerous direct current, even at the moment of switching on)Temperature monitoring of heat sinks and power transformerIntelligent power supply with actively controlled power rectifier for the power section and separate power supplies for low-power and control sectionsHand-selected, parallel power MOSFETs in the output stages (4-fold parallel connected) Switchable operating modesStereoMono bridgedMono Bi-Amping Left and right channel mixed or discrete Resistor ladder potentiometer with 256 steps, featuring precision resistors for absolute channel matching and microcontroller control for perfect logarithmic regulation curveWhen operating multiple devices (e.g., as mono blocks or for multi-way activations)Remote control of multiple amplifiers synchronously, because functions are not switched but selected directlySynchronization of volume controlsalternative setting of the volume via internal jumperStandard in silver anodized housing with black print or black anodized housing with silver printDolifet - DolifetterFirst introduced with the ABACUS 60-120D, the Dolifet circuitry has now found its way into themeisten amplifier and active speaker products maintained. It combines the load independence andextreme control, which all amplifier circuit variants at ABACUS claim for themselves with evengreater bandwidth, stability, and low distortion. With the Ampollo, the speakers are connected to each channel at the drain outputs of a total of eight power MOSFETs, four for the positive and four for the negative branch. So, a total of 16 output transistors work here. They are precisely matched to each other."matched" and can jointly handle peak currents of many tens of amperes.Over four special connectors per channel, it can be checked during the final inspection whether all FETscorrectly collaborate and truly distribute the effort evenly among everyone. For asufficient power transport, all critical traces are as large as possibleexecuted and additionally generously reinforced with tin on the underside of the boardsPower supply with spacious tanksFor an amplifier with extreme impulse response, a well-buffered power supply is essential becausefor the crisp, short-term performance peaks, it draws energy from its "short-term storage," theElectrolytic capacitors, or for short: electrolytic caps. These electrolytic caps provide the energy at the moment when the sine of theStromnetzes its performance minimum passes through, to then be recharged at the maximum. So that this Charging as evenly as possible, but discharging into the final stage as quickly as neededrequired can happen, the supply voltage passes on the way from the rectifier to theAmplifier a three-stage filtering. First, it is buffered in 16 small capacitors, each with 220µF, passes through one of four toroidal chokes per page and supply half, so that large Stromspitzen cannot affect the transformer and the rectifier, in order to then in the 16 largeCapacitors with a total of 160,000µF charge capacity for the respective needs of the power amplifiersto be ready.Clever RectifierBehind the 600VA toroidal transformer optimized for audio devices is a rectifier with brains. Inconventional power rectifiers have a voltage drop of about 0.7V across all diodes. This is indeednot much, but with the sometimes high currents that flow through, a considerablePower loss occurs. The threshold of these 0.7V also leads to the rhythm of the mains frequency to"hard" switching operations in the diodes and thus also interference signals at high power levels. In the smart, aktiven Gleichrichter des Ampollo werden statt einfachen Dioden MOSFETs, also schnelle, leistungsstarkeTransistors cross-connected by a special controller in sync with the alternating current.These transistors are selected to handle maximum power with minimal lossescan. For the symmetrical supply voltage and to make the two amplifier channels as independent as possible voneinander zu versorgen, enthält die Gleichrichterplatine diese Anordnung insgesamt viermal. Also vierController and 16 power MOSFETs. This circuit board is, so to speak, the heart of the amplifier, because from here the power amplifiers are provided with their Leistung supplied. Additionally, it takes over the central distribution of the mass potential, so to speak, the electric reference line, to which all circuit components in signal processing are oriented. Mathematical Volume Control with Connections If the Ampollo is to be used as a full amplifier, a precise and high-quality Volume control is particularly important. Here, a development for the Preamp 14 is used, which dort inzwischen zum High-End-Feature gemausert hat: the resistance ladder potentiometer. Here, the precise ALPS rotary potentiometer not used directly for the music signal, but by a microcontroller abgefragt, um paarweise Festwiderstände zusammenzuschalten. Hierdurch wird absoluter Kanalgleichlauf, also ensures level equality between left and right. Additionally, the controller almost over the gesamtem Regelbereich ein perfekter, logaritmischer Verlauf der Lautstärkeänderung erreicht. Die Querydes Potis erfolgt mit einem 8-Bit-Analog/Digital-Wandler und der Rechenchip "maps" diesen Wert auf eine 10-bit relay chain. This allows the volume to be adjusted in 256 precise steps. Over a special connection on the back, the control signal of this circuit can be lead out and thereby control one or more additional Ampollos. If an amplifier is set to "Master" and the others set to "Slave", allowing multiple Ampollos in a bi-/multi-amping setup or adjust the volume synchronously in a multi-channel system. For operation as a power amplifier, when the volume is already set on the source device or preamplifier will be, the gain factor can be set to one of 5 fixed values via internal jumpers. Size/Property Value Power connection: 230V AC, cold device connection Power consumption, automatic: < 0.2VA Power consumption, idle: approx. 50W Power consumption, maximum: approx. 750W RMS -Performance per Channel: approx. 300W at 4Ohm Music performance per channel: approx. 350W at 4Ohm Loading capacity:
Dayton Audio Pro 12" 8 Ohm Subwoofer Odeum 12LF400-8
Dayton Audio Pro 12" 8 Ohm Subwoofer Odeum 12LF400-8ode- um | \ ō-ˈdē-əm: An ancient Greek and Roman concert hall used for music and poetry.With the knowledge from decades of driver development, Dayton Audio places emphasis on technical excellence, product reliability, and innovation in the speaker components of the Odeum Series! The Odeum Series is a new line of professional speakers suitable for any venue. Robust build quality for years of powerful outputBalanced ratio of SPL to Xmax ensures a loud and far-reaching subLow Qts and high Bl for small vented enclosuresImmense output power and bass capability at an incredible price Nominal Diameter: 12" Power Handling (RMS): 400 Watts Power Handling (MAX): 800 Watts Impedance: 8 Ω Frequency Response: 30Hz - 1.5kHz Sensitivity: 94.5 dB 2.83V/1m Voice Coil Diameter: 3" Maximum Linear Excursion: 9.25mm
Wallflower R Lautsprecherbausatz + Gehäuse Bundle
Wallflower R Speaker Kit + Enclosure BundleWallflower R 1-Way Broadband Wall/Floor Speaker Assembly: W4-655; Frequency Crossover Components Mundorf Hi-Quality: Properties: Hifi and/or Surround Sound for impressive movie moments. Low space requirement. Living room cinema basefor your future In-Wall or On-Wall. Space-saving OnWall desk solution with full sound range,Vanishingly inconspicuous living room/dining room/lobby sound system. A proven 10cm full-range speaker inflat housing design. In two design proposals. The sound character is characterized by arich, powerful bass, a homogeneous mid-high tone performance, and a perfect stage imaging withbroadband typical spatiality. This kit is ideally suited for the most diverseApplications and in places where there is a lack of space. From the simple stereo placement in theLiving room and as TV sound enhancement in the home cinema, for secondary room sound or accompaniment ofPresentations in the studio. As wall speakers in two formats, as a floor-standing speaker with stand additionor flush-mounted. In our kits, we don't want to leave anything to chance! That's why all the materials needed for assembly are included with us.inclusive: the chassis W4-655, crossover components, screws, cables, damping material, connection terminal, and the MDF cuttings. The latter are manufactured in such a way that assembly is easy even for the inexperienced. Gestalterisch sind Ihren Fantasien und Vorstellungen keine Grenzen gesetzt: paint, veneer,folieren, tapezieren – you decide for yourself and thus give your new speakers aindividual appearance. All in all, this system offers you a sensationally affordable and creative solution for every music-and film sound enthusiasts who, despite having a small apartment, do not want to miss out on good sound and/or that certainKino experience would like to forego. Wallflower – whether rectangular or square – strikingly sonorous. Schedule an appointment and let us convince you on site in Marburg. In this bundle, the case is included as a kit in raw MDF.
Celine Vorführer "Paar"
Celine aus unserer Vorführung 2 Wege Standlautsprecher Bestückung: 160mm Mundorf AMT U160W1.1-R, 270mm Tiefmitteltöner Dayton Audio RS270P-4, Passive Frequenzweiche Mundorf Hi-Quality: Eigenschaften: Mundorf AMTU160 mit Frontplatte, Dayton Reference RS270P-4, und zwei Passiv Membran auf der Rückseite. Zwei Chassis, zehn Oktaven. Celine ist ein zweiweg-system der Grenzbereiche. Der AMT vom deutschen Hersteller Mundorf® mit einer effektiven Membranfläche von 68,1 cm² ist er das Flaggschiff der neuen AMT U Serie, und im Gegensatz zu herkömmlichen Hochtonkalotten mit 19 bis 32 mm Durchmesser also maximal 8,04 cm² einfach eine Souveräne Lösung. Mundorf AMT-Membran sind in ihrer Form einzigartig. Sie zeichnet sich aufgrund ihrer außergewöhnlich hohen inneren Dämpfung und durch extrem niedrige Klirrwerte aus. Dies gilt besonders für die ungeradzahligen harmonischen Verzerrungen K3 und K5. Der Garant für höchste Pegelreserven mit enormer Feinzeichnung der ultraleichten Membran. Ab 1500Hz spielt sich der AMT nie in den Vordergrund. Er zeichnet vorbildlich und dynamisch jeden noch so kleinen Impuls der Musik nach. Sein Mitstreiter ist ein RS270P-4 aus der Referenz-Serie von Dayton Audio. Er gehört zu der heute seltenen Gattung der Low Mms Chassis mit Papiermembran! Der Aluminium-Druckguss-Korb beherbergt die leichte Papier-Membran und zentral beherrscht ein Phase-Plug das optische Geschehen. Die Leichte Papiermembran überzeugt mit detailreichen Mittelton, imposanten Bass und der gesamt performten Darbietung bruchlos grob und feindynamisch. Wir sind geneigt, Celine das Prädikat „Lautsprecher für alles“ zu attestieren. Sie konnte in unseren Räumen; Kleiner Raum 14m², akustisch bedämpft. Großer Raum 24m², akustisch wenig bedämpft wenig Fensterfläche. Zweiter Großer Raum 35m², akustisch gut bedämpft viel Fensterfläche. In allen Lagen, laut wie leise, an Transistor, Röhre und Digitalverstärkern immer überzeugen. Bevorzugt bei Verstärkern jedoch die kräftigen Burschen, und verkraftet auch mal Laut. Die Meinungen der Fachpresse: https://www.hifitest.de/test/lautsprecherbausaetze/variant-cline-22112 „High End und hohe Dynamik in einem – die Variant Céline ist ein Volltreffer! HiFi-Selbstbau.de „Der Celine wird ein extrem schnelles Ausschwingen attestiert und quasi kein Klirrfaktor“ Klang+Ton 1/23„ -der Lautsprecher ist definitiv ein Traum für die hochwertige Beschallung auch größerer Räume! waren allesamt eindeutig. Die ist gut!