Dayton Audio TCP115-4
Dayton Audio TCP115-4 4” Treated Paper Cone Midbass With high excursion capabilities and low Fs, Dayton Audio's TCP115-4 can produce a surprising amount of bass for a 4" woofer. In addition to its low frequency performance, this driver also performs very well through the midrange, making this driver ideal for use in smaller 2-way designs. Key Features Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure Dayton Audio TCP115-4 4" Treated Paper Cone Midbass Woofer 4 Ohm The TCP115-4 combines a large motor, 1" 4-layer voice coil, vented pole, and a sizable rubber surround to make use of its 4 mm of XMAX. This combination of features makes it a very versatile driver which can be used as a bass driver in a small 2-way system, center channel, or even portable Bluetooth speaker designs.
Dayton Audio TCP115-8
Dayton Audio TCP115-8 4” Treated Paper Cone Midbass With high excursion capabilities and low Fs, Dayton Audio's TCP115-8 can produce a surprising amount of bass for a 4" woofer. In addition to its low frequency performance, this driver also performs very well through the midrange, making this driver ideal for use in smaller 2-way designs. Key Features Aluminum former keeps voice coil cool for high power handling 1" diameter 4-layer voice coil improves power handling and low frequency response Extended pole piece creates symmetrical magnetic field for lower distortion Cosmetic low-profile mounting flange looks good without flush mounting Powerful motor for efficiency and compact enclosure Dayton Audio TCP115-8 4" Treated Paper Cone Midbass Woofer 8 Ohm The TCP115-4 combines a large motor, 1" 4-layer voice coil, vented pole, and a sizable rubber surround to make use of its 4 mm of XMAX. This combination of features makes it a very versatile driver which can be used as a bass driver in a small 2-way system, center channel, or even portable Bluetooth speaker designs.
Dayton Audio TD20F-4
Dayton Audio TD20F-4 3/4” Soft Dome Neodymium Tweeter 4 Ohm The Dayton Audio TD20F-4 uses a 3/4" silk dome to produce smooth response with excellent dispersion. At only 2-1/2" diameter and just over 1/2" deep, this tweeter is ideal for use in any compact design. Key Features 3/4" silk dome provides articulate yet non-fatiguing high frequency reproduction Exceptionally flat and smooth frequency response Ferrofluid for improved power handling and damping Neodymium magnet low-distortion motor system Dayton Audio TD20F-4 3/4" Soft Dome Neodymium Tweeter 4 Ohm Dayton Audio's TD20F-4 3/4" silk dome tweeter incorporates an optimized diaphragm that combines low mass, superb damping, and a carefully calculated dome profile offering an exceptionally flat frequency response. This, along with the low distortion neodymium motor system, ensures that high frequency content is reproduced as transparently as possible.
Dayton Audio GF180-4
Dayton Audio GF180-4 6-1/2" Glass Fiber Cone Woofer 4 Ohm Dayton Audio’s GF180-4 6-1/2” glass fiber cone woofer is built to produce powerful bass with smooth midrange response. The woven fiberglass cone and rubber surround damps cone resonances allowing an easy transition to tweeters when crossed over at 2,000 Hz. This affordable woofer is a great choice for 2-way bookshelf speaker designs. Key Features Woven fiberglass cone lowers resonances for smooth response and natural sound 4-layer voice coil on an aluminum former provides excellent heat dissipation Rubber surround helps damp the outside edge of the cone improving high frequency response Vented pole piece releases air trapped under the dustcap for quiet operation Low-profile frame minimizes diffraction making these drivers suitable for surface mount applications Dayton Audio GF180-4 6-1/2" Glass Fiber Cone Woofer 4 Ohm With flat response to 4,000 Hz and excellent low frequency extension, the GF180-4 6-1/2” glass fiber cone woofer from Dayton Audio is ideal for use in low cost 2-ways speaker designs. The naturally damped woven fiberglass cone is driven by a 4-layer voice coil wound on an aluminum former. This driver is a great choice for your next bookshelf speaker, multiple driver tower, or even portable sound systems
Dayton Audio CF120-4
Dayton Audio CF120-4 4-1/2” Woven Carbon Fiber Midwoofer 4 Ohm Dayton Audio's CF120-4 4-1/2" midwoofer utilizes a high-tech carbon fiber cone to create its own perfect combination of visual aesthetics and uncompromising audio performance. Key Features Pincushion cast aluminum frame Ultra-light and stiff woven carbon fiber cone Copper cap and large magnet provide a low distortion motor structure Durable and potent 1" diameter hi-temp 2-layer voice coil Black anodized aluminum vented former increases heat dissipation and power handling Flat extended frequency response to 15,000 Hz Great for small satellite 2-way, MTM designs, or high-end car audio applications Dayton Audio CF120-4 4-1/2" Woven Carbon Fiber Midwoofer 4 Ohms Take one longing glance at the Dayton Audio CF120-4 4-1/2" midwoofer's carbon fiber cone, cast frame, and large magnet, and you'll realize performance, not cost, was the primary development criteria. Delve further into the product details, and the flat extended frequency response, strong motor, and well-balanced parameters will confirm your thoughts. This beautiful driver looks awesome -- and performs as well as it looks!
Dayton Audio PTMini-6
Dayton Audio PTMini-6 Planar Tweeter 6 Ohm The Dayton Audio PTMini-6 is a miniature planar tweeter that is big on performance and sound quality! With 6 ohm impedance and incredibly small size this is an excellent choice for car audio or home use. Key Features Compact planar ribbon tweeter driver High output and exceptional treble definition Surface or flush mount installation Potent neodymium magnetic design Supports 4,000 Hz crossover, 12 dB/octave Dayton Audio PTMini-6 Planar Tweeter 6 Ohm The clarity, definition, and transparency of a planar tweeter is unmatched by almost any other type of tweeter. Now Dayton Audio lets you build planar technology into more compact projects with the PTMini-6 planar tweeter! The surface-mount housing design can also be flush-mounted for a world of possible uses, such as a car A-pillar tweeter, a supertweeter for a full-range driver, a rear-mounted ambience tweeter, a conventional forward-facing tweeter configuration, or even a line array! The membrane of a planar tweeter is an almost weightless ribbon of heat-resistant Kapton material and an etched aluminum conductor, enabling the performance of aluminum ribbon tweeters without the losses inherent in the transformer of a conventional ribbon tweeter. The result is a tweeter that is incredibly fast, dynamic, and smooth sounding with imperceptible distortion and excellent power handling. A crossover cut-off frequency of 4,000 Hz or higher is recommended with a 12 dB/octave filter slope.
Dayton Audio GF180-8
Dayton Audio GF180-8 6-1/2" Glass Fiber Cone Woofer 8 Ohm Dayton Audio’s GF180-8 6-1/2” glass fiber cone woofer is built to produce powerful bass with smooth midrange response. The woven fiberglass cone and rubber surround damps cone resonances allowing an easy transition to tweeters when crossed over at 2,000 Hz. This affordable woofer is a great choice for 2-way bookshelf speaker designs. Woven fiberglass cone lowers resonances for smooth response and natural sound Rubber surround helps damp the outside edge of the cone improving high frequency response 4-layer voice coil on an aluminum former provides excellent heat dissipation Vented pole piece releases air trapped under the dustcap for quiet operation Low-profile frame minimizes diffraction making these drivers suitable for surface mount applications Dayton Audio GF180-8 6-1/2" Glass Fiber Cone Woofer 8 Ohm With flat response to 4,000 Hz and excellent low frequency extension, the GF180-8 6-1/2” glass fiber cone woofer from Dayton Audio is ideal for use in low cost 2-ways speaker designs. The naturally damped woven fiberglass cone is driven by a 4-layer voice coil wound on an aluminum former. This driver is a great choice for your next bookshelf speaker, multiple driver tower, or even portable sound systems.
Dayton Audio DSN25Ti-4
Dayton Audio DSN25Ti-4 1" Titanium Dome Neodymium Tweeter with Steel Frame 4 Ohm Sharing the same look as Dayton Audio's popular Designer Series drivers, the DSN25Ti-4 1" titanium dome tweeter has been optimized to deliver accurate and detailed response with remarkably high efficiency. With a compact faceplate, low distortion copper cap, and 4 ohm impedance, this tweeter is ideal for use in 2-way MTM designs. Key Features Titanium dome delivers accuracy and detail with low distortion Exceptionally flat treble response for accurate high frequency reproduction 1" diameter voice coil with ferrofluid cooling for excellent power handling High-strength neodymium motor offers low distortion and high efficiency Retains the same "family look" as the popular Designer Series woofers, subwoofers and passive radiators Dayton Audio DSN25Ti-4 1" Titanium Dome Neodymium Tweeter with Steel Frame 4 Ohm Dayton Audio's Designer Series DSN25Ti-4 1" titanium dome tweeter has everything you have come to expect from the Designer Series drivers such as smooth frequency response, low distortion, good efficiency, and even a matching frame. Driver integration and crossover designs are simple with smooth response from 2,000 to 20,000 Hz and predictable roll off on the low end. The powerful Ferrofluid cooled neodymium motor provides high efficiency allowing excellent dynamics while keeping size and weight to a minimum. Finally, the DSN25Ti-4 includes a copper cap on the pole piece to lower distortion ensuring accurate high frequency response.
Dayton Audio AN25F-4
Dayton Audio AN25F-4 1” Soft Dome Neodymium Car Audio Tweeter Pair 4 Ohm The Automotive Neodymium Series tweeter pairs by Dayton Audio offer remarkable clarity, good off-axis dispersion, and an exceptionally flat response above 3 kHz. These tweeters are specifically designed for car audio systems, however their modern appearance and flat response curve integrate easily into any design, especially where minimal center-to-center spacing of the tweeter and woofer placement is needed. Sold in pairs. Key Features Ultra-high sensitivity of 96dB to deliver high output with modest power Exceptionally flat treble response for accurate high frequency reproduction High-strength neodymium motor provides low distortion and compact size 1" silk diaphragm for remarkable clarity and great off-axis response 1" diameter voice coil for excellent power handling All hardware included to permit flush or surface mounting Dayton Audio AN25F-4 1" Soft Dome Neodymium Car Audio Tweeter Pair 4 Ohm Dayton Audio designed the AN25F-4 tweeter to provide superb audio reproduction. The silk diaphragm offers remarkable clarity, great off-axis dispersion and an exceptionally flat response above 3 kHz. Although these tweeters where specifically designed for car audio systems, their modern appearance, high efficiency, and flat response curve integrate easily into many non-automotive designs and are especially useful in MTM and TMM designs where high efficiency and/or minimal center-to-center spacing of the tweeter and woofer placement is needed. Sold in pairs. Specifications: • Power handling: 40 watts RMS/80 watts max (with appropriate crossover) • VCdia: 1" • Impedance: 4 ohms • Re: 3.0 ohms • Frequency range: 3,000-20,000 Hz • Fs: 1619 Hz • SPL: 96 dB @2.83V/1m.
Dayton Audio AN25Ti-4
Dayton Audio AN25Ti-4 1” Titanium Neodymium Car Audio Tweeter Pair 4 Ohm The Automotive Neodymium Series tweeter pairs by Dayton Audio offer remarkable clarity, good off-axis dispersion, and an exceptionally flat response above 3 kHz. These tweeters are specifically designed for car audio systems, however their modern appearance and flat response curve integrate easily into any design, especially where minimal center-to-center spacing of the tweeter and woofer placement is needed. Sold in pairs. Key Features Exceptionally flat treble response for accurate high frequency reproduction High-strength neodymium motor provides low distortion and compact size Ultra-high sensitivity of 95 dB to deliver high output with modest power 1" titanium diaphragm for incredibly accuracy and great off-axis response 1" diameter voice coil for excellent power handling All hardware included to permit flush or surface mounting Dayton Audio AN25Ti-4 1" Titanium Neodymium Car Audio Tweeter Pair 4 Ohm Dayton Audio designed the AN25Ti-4 tweeter to provide superb audio reproduction. The titanium diaphragm offers remarkable accuracy, great off-axis dispersion and an exceptionally flat response above 3 kHz. Although these tweeters where specifically designed for car audio systems, their modern appearance, high efficiency, and flat response curve integrate easily into many non-automotive designs and are especially useful in MTM and TMM designs where high efficiency and/or minimal center-to-center spacing of the tweeter and woofer placement is needed. Sold in pairs. Specifications: • Power handling: 40 watts RMS/80 watts max (with appropriate crossover) • VCdia: 1" • Impedance: 4 ohms • Re: 3.11 ohms • Frequency range: 3,000-20,000 Hz • Fs: 1744 Hz • SPL: 95.5 dB @2.83V/1m.
Dayton Audio DA135-8
Dayton Audio DA135-8 5-1/4” Aluminum Cone Woofer 5-1/4" aluminum cone woofer with rubber surround, flat spider, and special composite dustcap. Key Features Makes a great studio monitor speaker Aluminum cone offers a flat frequency response Cosmetically appealing integrated trim ring Very low distortion driver Dayton Audio DA135-8 5-1/4" Aluminum Cone Woofer 5-1/4" aluminum cone woofer with rubber surround, flat spider, and special composite dustcap. The cosmetic stamped steel frame provides a very high-class and professional look to your next speaker design. The aluminum cone offers a flat frequency response in the passband region with very low distortion.
Dayton Audio DA115-8
Dayton Audio DA115-8 4” Aluminum Cone Woofer The aluminum cone on this driver is extremely rigid yet well damped, making the bass and midbass region very clean and low in distortion. Key Features Great looking and sounding woofer Cosmetic stamped steel frame Flat frequency response in passband region Impressive output capabilities when used in MTM designs Very low distortion Dayton Audio DA115-8 4" Aluminum Cone Woofer The aluminum cone on this driver is extremely rigid yet well damped, making the bass and midbass region very clean and low in distortion. When used with a well-designed crossover, an extremely flat frequency response can be achieved that is clean well into the midrange region.
Dayton Audio DA175-8
Dayton Audio DA175-8 7” Aluminum Cone Woofer 7" aluminum cone woofer with rubber surround, flat spider, and special composite dustcap. Key Features Special composite dustcap Stamped steel frame provides a very high-class and professional look Aluminum cone offers a flat frequency response in the passband region with very low distortion Dayton Audio DA175-8 7" Aluminum Cone Woofer 7" aluminum cone woofer with rubber surround, flat spider, and special composite dustcap. The cosmetic stamped steel frame provides a very high-class and professional look to your next speaker design. The aluminum cone offers a flat frequency response in the passband region with very low distortion.
Dayton Audio PHT1-6
Dayton Audio PHT1-6 Planar Horn Tweeter 6 Ohm Dayton Audio's PHT1-6 provides the quick reflexes and smooth, non-fatiguing detail of a planar tweeter with horn-loaded efficiency and high power handling, creating the perfect high frequency complement to powerful pro audio drivers or other high-sensitivity speakers. 6 ohm impedance. Key Features Low-compression planar horn design Detailed, non-fatiguing sound reproduction Rugged, reinforced injection-molded horn flare Controlled, 60 degree horizontal dispersion High 80-watt RMS power handling Dayton Audio PHT1-6 Planar Horn Tweeter 6 Ohm Planar tweeters offer a seductively smooth and richly detailed sound, but most don’t have the ruggedness or reliability for use in pro audio and high level studio monitoring applications. The Dayton Audio PHT1-6 Planar Horn Tweeter is different. It features a horn loaded design that achieves the high sensitivity of many horn loaded compression drivers, and its thermally robust Kapton diaphragm with etched aluminum conductor is rugged enough to handle the high power levels common in pro audio. Cooling is often a problem in planar drivers, but the PHT1-6 features a large, rear-mounted aluminum heatsink that is thermally coupled to the membrane’s conductor and also evacuates heat from the transducer’s rear chamber, for extended component life and the ability to withstand peaks of 160 watts (80 watts RMS) when used with a 2nd order 2,500 Hz (minimum) crossover. The 6-ohm impedance helps the PHT1-6 maintain a high sensitivity, for use with virtually any pro audio or high efficiency midbass driver.
Dayton Audio PT2C-8
Dayton Audio PT2C-8 Planar Tweeter The immediacy and lack of coloration found in planar-type tweeters offers users extremely detailed, effortless high frequency reproduction. The Dayton Audio PT2C-8's physical shape and wide horizontal/narrow vertical dispersion also make it an obvious choice for line arrays. Key Features Superb resolution and detail for the most discerning audiophile Wide horizontal and narrow vertical dispersion patterns Perfect for use in line arrays 3 kHz recommended crossover frequency at 12 dB per octave Dayton Audio PT2C-8 Planar Tweeter Many audiophiles praise the Dayton Audio PT2C-8 ribbon tweeter's excellent clarity, transparency, and imaging. The key to this remarkable performance is the almost weightless ribbon element: a Kapton film membrane etched with a pattern of aluminum conductors and placed precisely between two rows of neodymium magnets. The result is an immediate response to any transient impulse found in the original signal. The Dayton Audio PT2's ability to deliver musical detail is clearly amazing. The tweeter's large membrane and radiating area provide higher power handling and a substantially lower cut off frequency. This membrane is thermally attached to a cast aluminum plate that facilitates cooling and dramatically increases dynamic range. The flared waveguide's wide horizontal dispersion projects an excellent off axis response. At the same time, vertical dispersion is limited, which reduces distracting floor and ceiling reflections. Perfect for line array applications. The recommended second order crossover cut-off frequency is 3 kHz or higher, although the crossover point can be lowered to 2,500 Hz if a 3rd order crossover is used.
Dayton Audio RC180-55
Der revolutionäre 2„ x 7“ Tieftöner RC180-55 von Dayton Audio basiert auf der patentierten Res-Core™-Technologie von Resonado Labs und ermöglicht Ihnen die Erstellung kompakter Systeme mit außergewöhnlicher Tieftonwiedergabe und geringerer Verzerrung als je zuvor. Mit einer einzigartigen flach gewickelten Schwingspule, die von einem leistungsstarken Quad-Gap-Neodym-Motor angetrieben wird, bietet dieser Treiber mit hohem Seitenverhältnis eine hohe Auslenkungsfähigkeit, minimale Kompression und einen gleichmäßigen Frequenzgang. Wichtigste Merkmale. Die patentierte Res-Core™-Technologie dreht die Schwingspule auf die Seite, um eine höhere Auslenkung und einen verbesserten Frequenzgang zu erzielen. Der leistungsstarke Quad-Gap-Neodym-Motor sorgt für eine konstante Motorkraft über einen Auslenkungsbereich von ±4,7 mm. Die vollständig abgestützte Membran minimiert das Aufbrechen und sorgt für einen extrem gleichmäßigen Frequenzgang mit geringer Verzerrung. Die Langhub-Sicke und die große, hinten montierte Spinne ermöglichen eine uneingeschränkte Auslenkung mit unglaublicher Linearität. Das vollständig offene Design bietet einen unübertroffenen Luftstrom und eine effiziente Kühlung, um eine hohe Belastbarkeit zu ermöglichen. Perfekt für kompakte Systeme, die einen kraftvollen Tieftonbereich liefern müssen. Dayton Audio ist stolz darauf, den RC180-55 2„ x 7“ Res-Core™ Neodym-Tieftöner für DIY-Lautsprecher-Enthusiasten weltweit anzubieten. Dieser Treiber dreht die Schwingspule buchstäblich auf die Seite und ermöglicht so eine größere Auslenkung mit einer gleichmäßigeren Wiedergabe als andere derzeit erhältliche Treiber mit hohem Seitenverhältnis. Sie haben jetzt die Möglichkeit, Ihr Audioerlebnis zu verbessern, indem Sie ein außergewöhnliches kompaktes Lautsprechersystem schaffen, das eine geringere Verzerrung und tiefere Bässe als je zuvor bietet. Bestellen Sie noch heute Ihren Dayton Audio RC180-55 Res-Core™ Neodym-Tieftöner und schöpfen Sie das volle Potenzial Ihrer DIY-Audioprojekte aus! Hochleistungsfähiges, kompaktes Design Dieser leistungsstarke, kompakte Tieftöner verfügt über eine einzigartige 2„ x 7“ Racetrack-Form, wodurch er sich perfekt für Soundbars, tragbare Designs und andere kompakte Lautsprecherprojekte eignet. Mit einem Frequenzbereich von 40–2000 Hz, einer Belastbarkeit von 30 W und einer mechanischen Auslenkung von fast 1" Spitze-Spitze (±12 mm Xmech) werden Sie von den leistungsstarken Tieftonfähigkeiten dieses Treibers mit hohem Seitenverhältnis begeistert sein. Flache Schwingspule Die doppelseitig flach gewickelte Schwingspule und die Aluminiumspule sorgen für eine extrem hohe Wicklungslänge und unterstützen die racetrack förmige Membran mit hohem Seitenverhältnis perfekt. RC180-55 Quad-Gap-Motor Quad-Gap-Motorsystem Das Quad-Gap-Motordesign erzeugt ein extrem langes Magnetfeld, um auch bei hoher Auslenkung eine konstante Motorkraft zu erzielen. RC180-55 Long-Throw-Aufhängung Long-Throw-Aufhängung Eine optimierte Long-Throw-Sicke und eine hinten montierte Spinne sorgen für eine lineare Bewegung und konstante Nachgiebigkeit bei der extremen Auslenkung, die für eine hohe Ausgangsleistung im Tieftonbereich erforderlich ist.