Dayton Audio ND65-4
Dayton Audio ND65-4 2-1/2” Aluminum Cone Full-Range Neo Driver 4 Ohm Dayton Audio's compact ND65-4 aluminum cone full-range driver demonstrates the latest advances in high-excursion design processes. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Rubber-edged aluminum alloy cone Large excursion capability Self-shielded Neo-Balanced motor structure 4-layer underhung voice coil with polyimide former High power handling Dayton Audio ND65-4 2-1/2" Aluminum Cone Full-Range Neo Driver 4 Ohm Dayton Audio's compact ND65-4 aluminum cone driver demonstrates the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source speaker applications, or combined in multiples and line arrays.
Dayton Audio DAEX30HESF-4
Dayton Audio DAEX30HESF-4 High Efficiency Steered Flux Exciter with Shielding 30mm 40W 4 Ohm The DAEX30HESF-4 30 mm steered high flux exciter is one of the most powerful in Dayton Audio's line of exciters capable of handling up to 40 watts. A pre-attached 3M VHB adhesive ring combines with four screw-down mounting tabs for maximum energy transfer. Key Features High output exciter design handles up to 40 watts RMS Specially designed neodymium motor and proprietary voice coil 3M™ VHB™ adhesive ring with four mounting holes Low inductance (only 0.3 mH) motor for extended response Dayton Audio DAEX30HESF-4 High Efficiency Steered Flux Exciter with Shielding 30mm 40W 4 Ohm Dayton Audio's DAEX30HESF-4 steered high flux exciter is one of our most powerful. It has a specially designed neodymium motor system that imparts strong forces on even the most rigid surface for maximum output. For use with medium sized amplifiers, this steered high flux exciter incorporates a 4 ohm voice coil to extract maximum power. A wide frequency response is permitted due to this exciter's low inductance of only 0.3 mH. Four threaded screw holes are integrated into the exciter's shell and combine with a 3M VHB (Very High Bond) adhesive, permitting this exciter to be securely coupled to a wide range of materials, even upside-down mounting and attaching to moving objects. Two solder tabs offer quick, permanent wire attachment. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 40 watts RMS • VCdia: 30 mm • Nominal impedance: 4 ohms • Re: 3.8 ohms • Le: 0.31 mH • Fs: 300 Hz • Dimensions: 2.25" dia.(2.75" across mounting tabs) x 1.125" H • Adhesive dimensions: 1.25" outside diameter • Weight: 158 grams.
Dayton Audio DAEX25CT-4
Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX25CT-4 is designed by Dayton Audio with a 1" voice coil for 10 watt RMS power handling, for more output than most of the other coin-type exciters. Key Features Small size; just under 2" diameter, about 9/16" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 1" voice coil for 10 watt RMS power handling Dayton Audio DAEX25CT-4 Coin Type 25mm Exciter 10W 4 Ohm Dayton Audio's 25 mm DAEX25CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil allows for more input power for higher output applications while maintaining a slim-line form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 10 watts RMS • VCdia: 25 mm • Nominal impedance: 4 ohms • Re: 3.6 ohms • Le: 0.07 mH • Fs (uncoupled): 306 Hz • Dimensions: 1.89" (48 mm) dia. x 0.59" (15 mm) H • Adhesive dimensions: 1.06" (27 mm) outside diameter • Weight: 74.6 grams.
Dayton Audio DAEX25TP-4
Dayton Audio DAEX25TP-4 Tripod 25mm Exciter 20W 4 Ohm For turning larger surfaces into speakers, and more bass output, Dayton Audio's DAEX25TP-4 features three extended arms. Cooling vents draw air across the propietary voice coil for higher power handling. Key Features Unique, three arm design for exciting a large surface Pre-applied 3M™ VHB™ adhesive for quick, secure installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 20 watt RMS power handling for high output Dayton Audio DAEX25TP-4 Tripod 25mm Exciter 20W 4 Ohm Dayton Audio's DAEX25TP-4 tripod exciter is built with three arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the three arms ... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 20 watts RMS • VCdia: 25 mm • Nominal impedance: 4 ohms • Re: 4.2 ohms • Le: 0.10 mH • Fs: 233 Hz • Dimensions: 3.49" (88.71 mm) overall diameter x 0.83" (21 mm) total height • Weight: 82 grams
Dayton Audio AMT2-4 Air Motion Transformer Tweeter
Dayton Audio AMT2-4 Air-Motion-Transformer Hochtöner 4 Ohm Der Dayton Audio AMT2-4 Air Motion Transformer Hochtöner verleiht Ihrem Design Klarheit, Transienten-Geschwindigkeit und musikalische Finesse. Die runde Frontplatte des Hochtöners lässt sich leicht bündig in Schallwände einbauen, und die bahnbrechende AMT-Technologie ermöglicht eine hohe Leistung aus einem so kompakten Treiber. Wichtigste Merkmale Das fortschrittliche Air Motion Transformer-Design „quetscht“ die Luftmoleküle, anstatt sie zu schieben oder zu zerdrücken. Die gefaltete Kapton-Bändchenmembran liefert eine detaillierte, dynamische Wiedergabe. Leistungsstarke, leichte Neodym-Magnetstruktur für geringe Verzerrung und hohen Wirkungsgrad. Klanglich vergleichbar mit den besten Metallbändchen- und Planar-Hochtönern
Dayton Audio CE Series CE40P-8 1-1/2" Mini Speaker
Dayton Audio’s CE40P-8 is an economical small full-range driver that features a high-output neodymium motor, a lightweight paper cone, a front gasket, and a steel frame with two mounting lobes. 8 ohm impedance. Key Features Paper cone with mylar dust cap for extended highs Rugged stamped steel frame High-energy double neodymium magnet motor Dayton Audio is pleased to introduce the new Commercial Engineering (CE) Series of small loudspeaker drivers. Engineers, designers, and integrators will benefit from how effortlessly these speaker components satisfy the diverse demands associated with consumer electronics and audio-enabled projects. Multiple types and styles are available within the CE Series driver family. Each was produced to provide excellent audio quality no matter what the overall system design goals may be, and to suit a wide spectrum of engineering requirements. These versatile yet economical loudspeakers are available in sizes from 28 mm (1-1/8") to 90 mm (3-1/2") in diameter, and with power ratings from 1.5 watts to 5 watts continuous RMS power. The CE40P-8 provides features you’d expect from a much larger driver, in a size that’s perfect for miniature applications that require wide dispersion and rich, natural sound. Its high-quality design features a paper cone with mylar dust cap, rubber surround, textile spider, high-performance neodymium motor, and a steel frame with dual mounting lobes for conventional mounting.
Dayton Audio ND90-8
Dayton Audio ND90-8 3-1/2” Aluminum Cone Full-Range Neo Driver 8 Ohm Looking for a small driver that punches above its weight class? The ND90-8 radical high performance full-range transducer exudes an aura of superiority. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Direct replacement for Aura NS3 Rubber-edged anodized aluminum alloy cone Large excursion capability—4 mm Xmax, 20 mm peak Self-shielded Neo-Balanced motor structure Full-range 80 Hz to 15 kHz performance 3/4" 4-layer underhung voice coil with polyimide former 20 watts RMS power handling Dayton Audio ND90-8 3-1/2" Aluminum Cone Full-Range Neo Driver 8 Ohm Dayton Audio's compact aluminum cone drivers demonstrate the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source applications, or combined in multiples and line arrays.
Dayton Audio DAEX9CT-4
Dayton Audio DAEX9CT-4 Coin Type 9mm Exciter 0.5W 4 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX9CT-4 is the smallest of the Dayton Audio Exciters and is designed to turn small surfaces into a hidden sound source. Key Features Super small size; less than an inch in diameter, less than 3/8" high 4-ohm impedance for use with small, Class D amplifiers Turns almost any surface into a speaker Pre-applied 3M™ VHB™ adhesive for quick, secure installation Rare-earth neodymium motor Dayton Audio DAEX9CT-4 Coin Type 9mm Exciter 0.5W 4 Ohm Dayton Audio's 9 mm DAEX9CT-4 coin-type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's extremely small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Its 4-ohm nominal impedance facilitates the use of series and series-parallel wired arrays for a highly focused, minimum dispersion sound pattern. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 0.5 watts RMS • VCdia: 9 mm • Nominal impedance: 4 ohms • Re: 3.6 ohms • Le: 0.02 mH @ 10 kHz • Fs: 1,200 Hz • Dimensions: 0.83" (20.9 mm) dia. x 0.33" (8.5 mm) H • Adhesive dimensions: 0.43" (10.8 mm) outside diameter, 0.030" (7.7 mm) inside diameter • Weight: 3.9 grams.
Edelstahlring schwarz für Tectonic TEBM46C20N
Ring black for Tectonic TEBM46C20NRing for Tectonic TEBM46C20N in black powder-coated Outer diameter: 95mm Material thickness: 3mm -------------------------------------------------------- Variation incl. accessories includes: Package contents: - 1pc. Steel ring black with holes - 4pcs. M3x 12 black - 4pcs. M3 stainless steel nut - 4pcs. M4 x 18 black - 4pcs. M4 Insert Nut THE CHASSIS SHOWN IN THE IMAGE IS NOT INCLUDED IN THE DELIVERY.
Dayton Audio ND90-4
Dayton Audio ND90-4 3-1/2” Aluminum Cone Full-Range Neo Driver 4 Ohm Dayton Audio's ND90-4 compact aluminum cone driver demonstrates the latest advances in high-excursion design processes. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Full-range 80 Hz to 15 kHz performance Rubber-edged aluminum alloy cone Large excursion capability—4 mm Xmax, 20 mm peak Self-shielded Neo-Balanced motor structure 3/4" 4-layer underhung voice coil with polyimide former 20 watts RMS power handling Dayton Audio ND90-4 3-1/2" Aluminum Cone Full-Range Neo Driver 4 Ohm Dayton Audio's compact aluminum cone drivers demonstrate the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source applications, or combined in multiples and line arrays.
Dynavox RCA built-in socket black
Cinch built-in socket black, solder connection, screw mounting, gold-plated.
Dynavox RCA chassis jacks red
Dynavox RCA chassis jacks redCinch in-wall jacks red X-2059, solder termination, screw mounting, gold plated
Dayton Audio CE Series CE140-30S-8 1" x 5" Extended Range Driver 8 Ohm
The CE140-30S-8 by Dayton Audio is a 1" x 5" tall-aspect-ratio extended range driver with a flat sandwich-construction diaphragm and a compact neodymium motor, for applications requiring a very narrow format yet wide-bandwidth driver. Key Features Tall aspect ratio flat diaphragm for wide dispersion Compact neodymium magnet structure Low profile stamped steel frame Copper voice coil on vented Kapton former Suitable as a mid-woofer or extended range driver The Commercial Engineering (CE) Series drivers from Dayton Audio provides engineers, designers, and integrators with a line of economical small drivers that fit the diverse range of applications found in consumer electronics and audio-enabled electronic projects. The Dayton Audio CE140-30S-8 is a 1" x 5" driver for applications requiring a narrow format, yet wide bandwidth. The flat diaphragm uses a sandwich construction composed of woven glass fiber skins over a paper honeycomb core, for an excellent combination of stiffness and damping – often difficult to achieve in a flat diaphragm. The compact neodymium motor provides long-throw performance in a small form factor, enabling the driver frame to be only 1.4" wide. The rugged, low-profile stamped steel frame features screw mounting holes for simplified installation. Use the CE140-30S-8 as a wide-bandwidth driver, or as a narrow-format midwoofer driver for high-fidelity music.
Dayton Audio ND64-16
Dayton Audio ND64-16 2-1/2” Aluminum Cone Full-Range Neo Driver 16 Ohm Dayton Audio’s ND64-16 is truly a full-range, low distortion driver and capable of over 6 mm of peak-to-peak excursion. When teamed up with the matching ND series passive radiators this driver can produce incredible full sound from compact enclosures. Key Features Rubber-edged aluminum magnesium alloy cone Dual neodymium motor structure 4-layer voice coil with polyimide former Copper sleeve to minimize distortion High power handling Dayton Audio ND64-16 2-1/2" Aluminum Magnesium Cone Full-Range Neo Driver 16 Ohm Dayton Audio’s ND64-16 is truly a full-range driver and capable of over 6 mm of peak-to-peak excursion. It features a dual neodymium magnet structure, a 3/4" CCAW voice coil, and a copper sleeve to minimize distortion. An efficient, low-distortion neodymium motor is combined with a rigid yet lightweight aluminum magnesium diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source speaker applications, or combined in multiples for line array designs.
Dayton Audio PA460-8
Dayton Audio PA460-8 18” Pro Woofer Dayton Audio PA Series Pro Woofers are a great upgrade for musical instrument or sound reinforcement cabinets, and also excel in custom-built speaker systems. Key Features Strong, low-mass carbon fiber impregnated paper cone I-beam rolled edge 1.5 mm steel frame Low distortion motor system w/copper cap Powerful 80 oz. ceramic ferrite magnet Vented pole piece/vented voice coil gap improve thermal management Black motor parts and black polyimide voice coil former dissipate heat Bumped back plate for unrestricted excursion Dayton Audio PA460-8 18" Pro Woofer Dayton Audio PA Series Pro Woofers are a great upgrade for musical instrument or sound reinforcement cabinets, and also excel in custom-built speaker systems. High power handling, smooth response, low distortion, deep punchy bass, and rugged reliability are the features that set PA Series woofers apart from other drivers – premium performance, but value priced.