RAAL 140-15D Dipol
RAAL 140-15D DipoleRAAL140-15D Dipole Ribbon Tweeter with Amorphous Core Size matters! With a surface area of 21 cm², a super-light 22 mg flat foil, deflector pads, and a homogeneous magnetic field, it represents the best in mid-high frequency transducers available today. Many other details in its construction serve to achieve the flattest possible frequency response and a fast transient response. It is fast and accurate. The main difference is that, unlike other ribbon speakers, it replicates the spherical sound wave, even though it is a linear source, so the high-frequency range is not emphasized and "beamed" into a very narrow vertical space. Special Features Special FLATFOIL ribbon made of pure aluminum Spezieller induktionsarmer SYMMLEAD signal path Spezial EQUAFIELD NdFeB magnet structure Special "Non-Waveguide" Front Panel made of INOX Extraordinary Vertical Dispersion Super fast settling time Flat frequency response Low nonlinear distortion High signal handling capability Highest Reliability Details about the product RAAL DIPOLE-140-15D Ribbon Tweeter Poor directional characteristics are very noticeable, such as the constant presence of the sound system in front of the listener, as the brain registers changes in the sound field with small head movements, causing the listener to remain very still while listening. Additionally, overly direct speakers tend to provoke only a few reflections in the listening room, depriving the necessary diffuse sound field in the room of high-frequency components, which poses another problem for our brain. Real instruments do not behave this way, so this should be replicated as closely as possible. The 140-15D does exactly that, generating almost hemispherical sound waves, just like life around us does.Its ability to produce a very high sound pressure level without audible distortions while effortlessly reproducing the smallest musical details brings the natural character of the played instrument into the listening space, with a sound quality that makes the listener a participant in an event that took place in another place and time.The 140-15D easily "tricks" the human brain into suddenly making everything sound right and as it should. The brain has no choice but to interpret that there are real, living people playing real musical instruments, precisely in the room where a millisecond ago there was nothing but your stereo system. The feeling of hearing a "natural" sound is overwhelming. The exact size of all instruments and voices, their perfect position within the soundstage, and the clarity of the air between the positions of the instruments are immediately recognizable...Enough said. You have to hear it to believe it.
RAAL 140-15D
RAAL 140-15DRAAL140-15D Flat Foil Ribbon Tweeter with Amorphous Core Size matters! With a surface area of 21 cm², a super-light 22 mg flat film, deflector pads, and a homogeneous magnetic field, it represents the best that is available today in the field of mid-high frequency transducers. Many other details in its construction serve to achieve the flattest possible frequency response and a fast transient response. It is fast and accurate. The main difference is that, unlike other ribbon speakers, it reproduces the spherical sound wave, even though it is a linear source, so the high-frequency range is not emphasized and "beamed" into a very narrow vertical space.Special Features Spezielles FLATFOIL ribbon made of pure aluminum Spezieller induktionsarmer SYMMLEAD signal path Special EQUAFIELD NdFeB magnet structure Spezial "Non-Waveguide" Front Panel made of INOX Außergewöhnliche vertikale Dispersion Super fast settling time Flat frequency response Low nonlinear distortion High signal load capacity Highest Reliability Product Details RAAL 140-15D Flat Foil Ribbon Tweeter Poor directional characteristics are very noticeable, such as the constant presence of the sound system in front of the listener, because the brain registers changes in the sound field with small head movements, causing the listener to remain very still while listening. Additionally, overly direct speakers tend to provoke only a few reflections in the listening room, depriving the room of the needed diffuse sound field in the high-frequency components, which presents another problem for our brain. Real instruments do not behave this way, so this should be replicated as closely as possible. The 140-15D does exactly that, generating almost hemispherical sound waves, just like life around us does.Its ability to produce a very high sound pressure level without audible distortions while effortlessly reproducing the smallest musical details brings the natural character of the played instrument into the listening space, with a sound quality that makes the listener a participant in an event that took place in another place and time.The 140-15D easily "tricks" the human brain into suddenly making everything sound right and as it should. The brain has no choice but to interpret that there are real, living people playing real musical instruments, exactly in the room where a millisecond ago there was nothing but your stereo system. The feeling of hearing a "natural" sound is overwhelming. The exact size of all instruments and voices, their perfect position within the soundstage, and the clarity of the air between the positions of the instruments are immediately recognizable? Enough said. You have to hear it to believe it.
RAAL 64-10 Flachfolien Bändchenhochtöner
RAAL 64-10 Flat Foil Ribbon TweeterRAAL64-10 Flat Foil Ribbon Tweeter is a high-end tweeter used in many high-end speakers. It is known for its transparency and never tiring top end. Furthermore, the RAAL 64-10 flat foil ribbon tweeter is non-repairable and known for its peak performance at an affordable price.Highlights Hochfr. FLATFOIL genuine ribbon 6cm2, Ferrite Core X-former 8 Ohm 91.5 dB/W X-over fr. Set to 3000Hz Round 104mm Details about the productRAAL 64-10 Flat Foil Tweeter with True RibbonThe RAAL 64-10 Flatfoil Ribbon Tweeter is a tweeter that uses a true ribbon. It features a diaphragm area of 6 cm2 and a ferrite core X-transformer. The RAAL 64-10 ribbon tweeter has a frequency response of 35Hz - 40kHz. The tweeter has an impedance of 8 ohms and a sensitivity of 91.5 dB/W. The X-over fr. is set at 3000Hz and the tweeter has a round shape with a diameter of 104mm.The tweeter is manufactured by RAAL Advanced Loudspeakers. Two beautiful designs that use this tweeter are the Song3 center speaker by Salk Sound and Philharmonic BMR by Dennis Murphy.
RAAL 70-20XR
RAAL 70-20XRRAAL70-20XR Flat Foil Ribbon Tweeter The world's smallest form factor for a true ribbon with a cutoff frequency of only 1.8 kHz, which is reliable, can handle a lot of power, and sounds as if it doesn't exist... All this by using only one series capacitor as a complete 4th order L-R crossover at 1.8k, combining acoustic and electrical slopes with a minimum of additional passive crossover components. Equipped with three transformer taps for resistance-free sensitivity adjustment, ribbon replacement kits, custom faceplates, and copper solder joints. All this makes it perfect for reaching new boundaries in high-end home stereo or multi-channel and near/mid-field studio monitoring applications. It was developed according to the wishes of the most demanding manufacturers who were seeking a quantum leap in true ribbon design.Highlights Hochwertiges fr. FLATFOIL genuine ribbon 7cm2, Amorphous Metal Core Xformer 8Ohm, 150W @ 2800Hz 4. L-R fs=1kHz low Q mit foam "deflector" pads, 91dB 110mmX88mm Details about the product RAAL 70-20XR Flat Foil Ribbon Tweeter Der RAAL 70-20XR flat foil ribbon tweeter is a high-end tweeter characterized by its smallBauform und sein echtes Bändchen-Design auszeichnet. It has a cutoff frequency of only 1.8 kHz and is inthe ability to process a lot of power while sounding as if it doesn't exist. TheHochtöner uses only a single series capacitor as a complete 4th order L-R crossover at 1.8k,die acoustic and electrical flanks with a minimum of additional passiveCombined with crossover components. The RAAL 70-20XR flat foil ribbon tweeter features three transformer taps for seamless sensitivity adjustment, ribbon replacement kits, custom faceplates, and copper solder points, making it perfectly suited to push new boundaries in high-end home stereo or multi-channel and near-field studio monitoring applications.
RAAL 70-10
RAAL 70-10RAAL70-10 Flat Foil Ribbon Tweeter with Amorphous Core Real ribbon speakers are known for their ability to reproduce details in music material exceptionally finely. They operate differently from conventional dome or ring HF drivers, so to speak, freed from all unnecessary ballast, and they perform their task better than anything else, regardless of price.Highlights Special FLATFOIL pure aluminum ribbon Special induction-free SYMMLEAD signal path Special EQUAFIELD NdFeB magnet structure Special "waveguide-free" INOX front panel Super fast settling time Flat frequency response Low nonlinear distortion High signal load capacity Highest Reliability Details about the product RAAL 70-10 Flat Foil Ribbon Tweeter Der RAAL 70-10 offers an enormous acceleration of air, more than 13000 G, and in less than 200Mikrosekunden wird die Luft gestoppt. Diese brutale Steuerungskraft in Kombination mit dem sanftestenResponse and a bandwidth of 100 kHz ensures that the weak link in everySystem that is equipped with it is not the HF driver. He will discern the differences between the electronics or the cables without any effort from the listeneraufzeigen. The better the upstream electronics chain is, the better the sound. The sound? Well,some people still cannot believe what they experienced for the first time in their knownMusikmaterial hören können. Das ist bei so ziemlich allen echten Bändchen Standard, aber die müheloseReplication of real dynamics and amazingly high sound pressure levels for a ribbon of this size were beforethe RAAL 70-10 not known. It is also not intimidated by large amplifiers. If youclean performance, feed the little guy with it, and you will be amazed by the music,the one you have, which is presented in another dimension of reality. If you have no electricityand/or do not like him, then discover the richness of detail and the true colors of eachInstruments played in a completely new, captivating way. No domes, rings, suspensions, bobbins, glue, damping material, not even the lacquer insulation on the coil wire. No heavy plastic carrier films, like with cheap quasi-ribbons. Just 0.004 mm thick aluminum foil, immersed in a strong magnetic field. And yes, the best quality of the HF range and a true, breathing micro and macro dynamics convey a completely new feeling for what the musician(s) wanted to say. You will forget that the system is in front of you. The music comes to life.