Dayton Audio TT25-8
Dayton Audio TT25-8 PUCK Tactile Transducer Mini Bass Shaker 8 Ohm Dayton Audio's TT25-8 PUCK is a small, 8 ohm tactile transducer or mini bass shaker that is intended to be used in home theater, gaming, and auto sound applications. Now includes convenient surface mounting kit for quick and easy installation onto any flat surface Key Features Quality construction and economically priced Includes surface mounting ring for quick installation onto flat surfaces Add tactile feedback to chairs and couches for the ultimate gaming and movie experience Small and easy to install even when space is at a minimum Dayton Audio TT25-8 PUCK Tactile Transducer Mini Bass Shaker 8 Ohm The PUCK™ by Dayton Audio is a small, economical tactile transducer otherwise known as a mini bass shaker that is intended to be used in home theater, gaming, and auto sound applications. This mini bass shaker has the unique ability to transfer low frequency sound waves directly to the listener by mounting the PUCK™ to surface areas that a listener's body will come into contact with. Because the listener "feels" the low frequency, the volume of the overall sound can be kept to a minimum without sacrificing the audio quality. The PUCK measures a mere 3-1/2" diameter and 1" depth, nearly identical in size to an ice hockey puck. The small depth and diameter of the PUCK™ mini bass shaker make it uniquely suited for tight spaces and unobtrusive applications. 4 layer Voice Coil with 1" aluminum former. The included surface mounting ring makes the Puck easy to install directly onto any flat surface. Includes Surface Mount Ring Kit (300-3882) to allow you to mount the PUCK transducer to any flat surface without the need for a mounting hole. Specifications: • Power handling: 15 watts RMS/30 watts max • Impedance: 8 ohms • Re: 7.7 ohms • Le: 1.30 mH @ 1k Hz • Fs: 40 Hz • Usable frequency response: 20-80 Hz • Force peak: 30 lbs. per ft. total when used in 4 PUCK configuration • Dimensions: 3-1/2" dia. x 1" H • Cutout: 70 mm with 25 mm slot for wire pass through • Consult owners manual for cut-out template and wiring information.
Dayton Audio DAEX32EP-4
Dayton Audio DAEX32EP-4 Thruster 32mm Exciter 40W 4 Ohm Turn even large, rigid surfaces into speakers with the Dayton Audio DAEX32EP-4 Thruster exciter! Key Features Robust, heavy-duty design with a 32 mm voice coil attached to a steel spider Pre-applied 3M™ VHB™ adhesive for quick, secure installation Rare-earth neodymium motor and a proprietary two-layer voice coil 4-ohm impedance for use with small, Class D amplifiers 40 watt RMS power handling for high output Dayton Audio DAEX32EP-4 Thruster 32mm Exciter 40W 4 Ohm Dayton Audio's DAEX32EP-4 Thruster exciter is built to turn large, thick, rigid surfaces into speakers. The 32 mm voice coil is attached to a steel spider for maximum restoring force when large amounts of power are applied, making it perfect for large glass panes, furniture, and surfaces that would normally resist the effects of an exciter. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small Class D audio amplifiers, without sacrificing total output. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body ... just peel and stick! Two male spade quick-disconnect terminals are built onto the main body for quick electrical connection. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 40 watts RMS • VCdia: 32 mm • Nominal impedance: 4 ohms • Re: 3.3 ohms • Le: 0.21 mH • Fs (uncoupled): 395 Hz • Dimensions: 2.36" (60 mm) overall diameter x 0.98" (23 mm) total height • Adhesive dimensions: 1.64" (41.75) outside diameter, 0.86" (21.75 mm) inside diameter • Weight: 148 grams.
Dayton Audio BST-1 High Power Pro Tactile Bass Shaker 50 Watts
Add a 4th dimension of sensory experience to your home theater by installing a BST-1 Bass Shaker from Dayton Audio! Start feeling what you’ve been missing! Key Features The ultimate home theater gadget! Add realism to your movies, games, and music Delivers incredible impact without high sound pressure levels Easy to install onto any flat surface The human ear has the ability to hear a wide range of sounds, however, some sound is simply too low to hear and must be felt through the body. Feeling this extremely low frequency sound adds a new dimension to your listening, gaming, and movie experiences. With a Dayton Audio BST-1 Bass Shaker installed in your home or auto sound system, you’ll feel those low bass notes or the thundering weight of a dinosaur’s foot slamming against the ground as it approaches. Your favorite action movies will come to life as you feel the cannon blasts and explosions impacting your body! If you’re into die-hard gaming the BST-1 Bass Shaker is the perfect addition to your gaming chair or couch! The power and impact of a football tackle puts you on the field and in the game! Feel the kick of your proton gun as it fires against the enemy! Unlike subwoofers, the BST-1 Bass Shaker will not overload your listening area, and the perceived loudness of the BST-1 Bass Shaker improves listening at lower sound volumes. The engineers at Dayton Audio designed the BST-1 Bass Shaker to reproduce accurate, tactile sensations from your music and movie sound tracks. When a BST-1 Bass Shaker is installed on a resonant surface, it increases the portion of tactile sound as being "felt" beyond what is normally produced by subwoofers and ordinary speakers. Conventional subwoofers are traditionally considered optimized when you can feel rather than hear the bass. By using a BST-1 Bass Shaker in your system, this goal becomes easier to achieve -- enabling the subwoofer to perform at a more natural sound level. A specially formulated nylon/fiber spider and the selection of quality hardware components allow the BST-1's internal motor structure to not only outperform the competition but increase the product lifespan. Simply put, with a Dayton Audio BST-1 Bass Shaker you can count on years and years' worth of amazing blasts, shakes, rolls, rattles, rumbles, thumps, bangs, and bumps!
Dayton Audio DAEX25FHE-4
Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciter 24W 4 Ohm Choose Dayton Audio's DAEX25FHE-4 sound exciter to add dynamic sound to almost any object or surface! Key Features Small size; just under 2" diameter, about 7/8" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 24 watt RMS power handling for high output Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciter 24W 4 Ohm Dayton Audio's 25 mm DAEX25FHE-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! For permanent inverted mounting (or when mounting on moving surfaces), four screw tabs are also provided to support the weight of the exciter. Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 24 watts RMS • VCdia: 25 mm • Nominal impedance: 4 ohms • Re: 4.3 ohms • Le: 0.10 mH • Fs: 224 Hz • Dimensions: 1.99" (50.5 mm) dia. x 0.81" (20.5 mm) H • Adhesive dimensions: 1.09" (27.6 mm) outside diameter, 0.86" (21.8 mm) inside diameter • Weight: 110.9 grams.
Dayton Audio DAEX19CT-4
Dayton Audio DAEX19-4CT Coin Type 19mm Vented Exciter 5W 4 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX19CT-4 sound exciter, by Dayton Audio, features voice coil vent holes for higher power handling Key Features Small size; just under 1-1/2" diameter, about 1/2" high Pre-applied 3M™ VHB™ adhesive for quick, durable installation Rare-earth neodymium motor with cooling vents for higher power handling 4-ohm impedance for use with small, Class D amplifiers Strategically-placed vent holes cool this exciter's voice coil for higher power handling Dayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 Ohm Dayton Audio's 19 mm DAEX19CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Cooling holes placed strategically on this exciter's housing allows for higher power handling, for applications where more output is desired, while maintaining a small form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 5 watts RMS • VCdia: 19 mm • Nominal impedance: 4 ohms • Re: 3.8 ohms • Le: 0.04 mH • Fs: 637 Hz • Dimensions: 1.3" (33 mm) dia. x 0.51" (13 mm) H • Adhesive dimensions: 0.85" (21.5 mm) outside diameter, 0.63" (21.75 mm) inside diameter • Weight: 31.5 grams.
Dayton Audio DAEX30HESF-4
Dayton Audio DAEX30HESF-4 High Efficiency Steered Flux Exciter with Shielding 30mm 40W 4 Ohm The DAEX30HESF-4 30 mm steered high flux exciter is one of the most powerful in Dayton Audio's line of exciters capable of handling up to 40 watts. A pre-attached 3M VHB adhesive ring combines with four screw-down mounting tabs for maximum energy transfer. Key Features High output exciter design handles up to 40 watts RMS Specially designed neodymium motor and proprietary voice coil 3M™ VHB™ adhesive ring with four mounting holes Low inductance (only 0.3 mH) motor for extended response Dayton Audio DAEX30HESF-4 High Efficiency Steered Flux Exciter with Shielding 30mm 40W 4 Ohm Dayton Audio's DAEX30HESF-4 steered high flux exciter is one of our most powerful. It has a specially designed neodymium motor system that imparts strong forces on even the most rigid surface for maximum output. For use with medium sized amplifiers, this steered high flux exciter incorporates a 4 ohm voice coil to extract maximum power. A wide frequency response is permitted due to this exciter's low inductance of only 0.3 mH. Four threaded screw holes are integrated into the exciter's shell and combine with a 3M VHB (Very High Bond) adhesive, permitting this exciter to be securely coupled to a wide range of materials, even upside-down mounting and attaching to moving objects. Two solder tabs offer quick, permanent wire attachment. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 40 watts RMS • VCdia: 30 mm • Nominal impedance: 4 ohms • Re: 3.8 ohms • Le: 0.31 mH • Fs: 300 Hz • Dimensions: 2.25" dia.(2.75" across mounting tabs) x 1.125" H • Adhesive dimensions: 1.25" outside diameter • Weight: 158 grams.
Dayton Audio DAEX19SL-4
Dayton Audio DAEX19SL-4 Slimline Coin Type 19mm Exciter 4W 4 Ohm This tiny exciter packs one heck of a punch. Dayton Audio's DAEX19SL-4 4 ohm sound exciter can turn most light rigid surfaces into a speaker with a surprising amount of output. Perfect for adding audio to small toys, signs, and many other projects. Key Features Only 1.3" diameter by 0.26" high, can be installed almost anywhere Dual suspension for linear operation and lower distortion 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M™ VHB™ adhesive for quick, durable installation Dayton Audio DAEX19SL-4 Slimline Coin Type 19mm Exciter 4W 4 Ohm Dayton Audio's 19 mm DAEX19SL-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in an extremely compact package for working with smaller surfaces in the minimum amount of space. This exciter's small size and weight enables audio reproduction in places never imagined: toys, signs, cabinet doors, etc... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 4 watts RMS • VCdia: 19 mm • Nominal impedance: 4 ohms • Re: 2.94 ohms • Le: 0.01 mH • Fs: 630 Hz • Dimensions: 1.3" (33 mm) dia. x 0.26" (6.5 mm) H • Adhesive dimensions: 0.9" (23 mm) outside diameter, 0.63" (16 mm) inside diameter • Weight: 13.5 grams.
Dayton Audio DAEX32Q-4
Dayton Audio DAEX32Q-4 Dual Steel Spring Balanced 32mm Exciter 20W 4 Ohm When applied to vertical surfaces the Dayton Audio DAEX32Q-4 dual spring balanced exciter has more linear movement to deliver extremely accurate response while producing lower distortion. Key Features Dual steel spider design to better support the large neodymium motor 32 mm two layer voice coil for high, 20 watts RMS, power handling Pre-applied 3M VHB adhesive for quick, secure installation 4 ohm impedance to make the most out of small class D amplifiers Dayton Audio DAEX32Q-4 Dual Steel Spring Balanced 32mm Exciter 20W 4 Ohm The DAEX32Q-4 from Dayton Audio can turn most rigid, flat surfaces into a speaker. Designed specifically for mounting to vertical surfaces, this exciter uses a dual spring spider to better support the large neodymium motor providing improved linearity. With a 2-layer 32 mm voice coil, this exciter can handle up to 40 watts peak for high output even when attached to thicker surfaces. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M™ VHB™ (Very High Bond) adhesive is pre-applied... just peel and stick! This exciter is perfect for turning whatever you can imagine into a speaker such as cabinet doors, monitors, windows, garage doors, ect… Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 20 watts RMS, 40 watts peak • VCdia: 32 mm • Nominal impedance: 4 ohms • Re: 3.2 ohms • Le: 0.22 mH • Fs: 320 Hz • Dimensions: 2.38" (60.5 mm) dia. x 0.78" (19.9 mm) H • Adhesive dimensions: 1.26" (32 mm) outside diameter, 0.9" (23 mm) inside diameter • Weight: 132.6 grams.
Dayton Audio DAEX-13-4SM
Dayton Audio DAEX-13-4SM Haptic Feedback Transducer 13mm 3W 4 Ohm Add audio to products and projects you never thought possible with the ultra-small Dayton Audio DAEX-13-4SM exciter. Measuring in at only 0.75" wide by 1.5" long and just 0.3" deep this exciter can fit almost anywhere. This exciter is also perfect for creating haptic feedback systems. Key Features Extremely small but powerful design can fit almost anywhere Perfect for creating haptic (touch) feedback systems Unique suspension allows high excursion for surprisingly powerful response Rare-earth neodymium motor and a proprietary 13 mm voice coil 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M™ VHB™ adhesive for quick, durable installation Dayton Audio DAEX-13-4SM Haptic Feedback Transducer 13mm 3W 4 Ohm Dayton Audio's DAEX-13-4SM exciter will allow you to add audio or haptic (tactile) feedback to even the smallest projects. This 13 mm exciter is an ideal option when designing pocket sized personal speakers or for adding audio to small art projects and models. At only 0.75" wide by 1.5" long, this exciter is even perfect for use in virtual reality haptic feedback systems such as gloves and headsets. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The unique suspension is capable of high physical excursion to allow this extremely small and lightweight exciter to deliver an impressive amount of force while remaining linear. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 3 watts RMS • VCdia: 13 mm • Nominal impedance: 4 ohms • Re: 3.7 ohms • Le: 0.022 mH • Fs: 950 Hz • Dimensions: 0.74" (18.5 mm) W x 1.51" (38.5 mm) L x 0.31" (8 mm) H • Adhesive dimensions: 0.65" (16.5 mm) outside diameter • Weight: 6.7 grams.
Dayton Audio DAEX32QMB-4
Dayton Audio DAEX32QMB-4 Quad Feet Mega Bass 32mm Exciter 40W 4 Ohm Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX32QMB-4 4 ohm 40 watt sound exciter improves power handling with a vented voice coil. Key Features Large 32 mm voice coil improves power handling to 40 watts RMS Rare-earth neodymium motor and a proprietary vented voice coil Four arms provide extra support improving linearity Turns any flat, rigid surface into a speaker Dayton Audio DAEX32QMB-4 Quad Feet Mega Bass 32mm Exciter 40W 4 Ohm Dayton Audio's DAEX32QMB-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). Also, the arms help to support the magnet/voice coil improving linearity when mounted on vertical surfaces. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1.25" voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick! Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications:• Power handling: 40 watts RMS • VCdia: 1.25" (32 mm) • Nominal impedance: 4 ohms • Re: 3.7 ohms • Le: 0.23 mH • Fs: 480 Hz • Dimensions: 3.125" (80 mm) overall diameter x 0.875" (22 mm) total height • Weight: 130 grams.
Dayton Audio EX32EP2-4 IMS™ Thruster 32mm Interchangeable Hardware Mount Exciter 40W 4 Ohm
Dayton Audio EX32EP2-4 IMS™ Thruster 32mm Interchangeable Hardware Mount Exciter 40W 4 OhmTurn even large, rigid surfaces into speakers with the Dayton Audio EX32EP2-4 Thruster exciter now with the exclusive IMS™ interchangeable mount Key FeaturesRobust, heavy-duty design with a 32 mm voice coil attached to a steel spider Exclusive IMS™ Interchangeable mount allows you to A/B test different exciters Rare-earth neodymium motor and a proprietary two-layer voice coil 40 watt RMS power handling for high output Easily swap non-functional units out in the field 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M VHB™ adhesive for quick, durable installation Test the limits of your imagination and turn any surface into a great sounding speaker system Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS™ Interchangeable Mount exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system even allows you to try out the assortment of exciters offered by Dayton Audio! Aural Excitement Dayton Audio's 25 mm EX25VT2-4 IMS™ coin type exciter features the ability to turn nearly any surface into a speaker, this exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. Exclusive IMS™ Interchangeable Mounting SystemWith Dayton Audio's exclusive IMS™ interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M VHB™ Adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters. Orten, die man sich nie vorstellen konnte: Spielzeug, Monitore, Schranktüren... sogar Fenster! Durch den Einsatz eines Neodym-Magneten wird ein maximaler magnetischer Fluss um die firmeneigene Schwingspule erzeugt, was zu einer höheren Empfindlichkeit im Vergleich zu Excitern ähnlicher Größe führt. Dies wiederum reduziert den Leistungsbedarf und ermöglicht die Verwendung sehr kleiner Audioverstärker, ohne dass die Gesamtleistung beeinträchtigt wird. Die 1-Zoll-Schwingspule und die Kühlluftöffnungen ermöglichen eine höhere Eingangsleistung für Anwendungen mit höherer Ausgangsleistung bei gleichzeitiger Beibehaltung eines schlanken Formfaktors. Exklusives IMS™ System zur austauschbaren Befestigung Mit dem exklusiven IMS™-Montagesystem von Dayton Audio können Sie viele verschiedene Konfigurationen, Platzierungen und Erreger ausprobieren, um die beste Kombination für Ihr Projekt zu finden. Jeder Erreger wird mit einem Montagepad mit Gewinde geliefert, das überall fest installiert werden kann. Die Installation ist einfach: Entfernen Sie das Pad von der Erregerbaugruppe, befestigen Sie das Pad mit 2 Schrauben oder mit dem 3M VHB™-Kleber an Ihrem Projekt und schrauben Sie die Erregerbaugruppe wieder auf das Pad! Die zerstörungsfreie Art der austauschbaren Halterung ermöglicht es Ihnen, verschiedene Erreger zu kombinieren oder nicht funktionierende Einheiten vor Ort auszutauschen, ohne eine Beschädigung Ihres Projekts oder der Erreger zu riskieren.
Dayton Audio EX2HMP-5 IMS™ Exciter Austausch Montageplatte 1 Stück
Dayton Audio EX2HMP-5 IMS™ Exciter Replacement Mounting Plate 1 PieceDer EX2HMP ist Teil eines exklusiven austauschbaren IMS™-Montagesystems von Dayton Audio, das mit allenIMS™-Exciters from Dayton Audio is compatible! Main features Exclusive interchangeable IMS™ mounting systemCompatible with all IMS™ exciters from Dayton Audio Screw-on 2-hole mount with pre-applied3M VHB™ adhesive for a quick, secure installation
Dayton Audio DAEX25VT-4
Dayton Audio DAEX25VT-4 Vented 25mm Exciter 20W 4 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX25VT-4 is designed by Dayton Audio with voice coil cooling air vents, for high-power applications. Key Features Small size; just over 2" diameter, about 7/8" high Pre-applied 3M™ VHB™ adhesive for quick, secure installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 20 watt RMS power handling for high output Dayton Audio DAEX25VT-4 Vented 25mm Exciter 20W 4 Ohm Dayton Audio's 25 mm DAEX25VT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 20 watts RMS • VCdia: 25 mm • Nominal impedance: 4 ohms • Re: 4.2 ohms • Le: 0.24 mH • Fs: 230 Hz • Dimensions: 2.02" (51.4 mm) dia. x 0.81" (20.5 mm) H • Adhesive dimensions: 1.10" (28 mm) outside diameter, 0.85" (21. 5 mm) inside diameter • Weight: 77.5 grams.
Dayton Audio EX32Q2-8 IMS™ Dual Steel Spring Balanced Interchangeable Hardware Mount 32mm Exciter 20
Dayton Audio EX32Q2-8 IMS™ Dual Steel Spring Balanced Interchangeable Hardware Mount 32mm Exciter 20W 8 OhmWhen applied to vertical surfaces the Dayton Audio EX32Q2-8 IMS™ dual spring balanced exciter has more linear movement to deliver extremely accurate response while producing lower distortion, now with the exclusive IMS™ Interchangeable mount Key FeaturesDual steel spider design to better support the large motorExclusive IMS™ Interchangeable mount allows you to A/B test different exciters Rare-earth neodymium motor and a proprietary voice coil 32 mm two layer voice coil for high, 20 watts RMS, power handling Easily swap non-functional units out in the field 8-ohm impedance for use with small, Class D amplifiers Pre-applied 3M VHB™ adhesive for quick, durable installation Test the limits of your imagination and turn any surface into a great sounding speaker system Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS™ Interchangeable Mount exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system allows you to try out the assortment of exciters offered by Dayton Audio! Aural Excitement The EX32Q2-8 IMS™ from Dayton Audio can turn most rigid, flat surfaces into a speaker. Designed specifically for mounting to vertical surfaces, this exciter uses a dual spring spider to better support the large neodymium motor providing improved linearity. With a 2-layer 32 mm voice coil, this exciter can handle up to 40 watts peak for high output even when attached to thicker surfaces. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Exclusive IMS™ Interchangeable Mounting System With Dayton Audio's exclusive IMS™ interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M Adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters. Der EX32Q2-8 IMS™ von Dayton Audio kann die meisten starren, flachen Oberflächen in einen Lautsprecher verwandeln. Dieser Exciter wurde speziell für die Montage an vertikalen Oberflächen entwickelt und verwendet eine doppelte Federspinne, um den großen Neodym-Motor besser zu unterstützen und eine bessere Linearität zu erreichen. Mit einer 2-lagigen 32-mm-Schwingspule kann dieser Exciter eine Spitzenleistung von bis zu 40 Watt erbringen, selbst wenn er an dickeren Oberflächen angebracht ist. Durch den Einsatz eines Neodym-Magneten wird ein maximaler magnetischer Fluss um die firmeneigene Schwingspule erzeugt, was zu einer höheren Empfindlichkeit im Vergleich zu Erregern ähnlicher Größe führt. Dies wiederum reduziert den Leistungsbedarf und ermöglicht die Verwendung sehr kleiner Audioverstärker, ohne dass die Gesamtleistung beeinträchtigt wird. Exklusives IMS™ System zur austauschbaren Befestigung Mit dem exklusiven, austauschbaren IMS™-Montagesystem von Dayton Audio können Sie viele verschiedene Konfigurationen, Platzierungen und Exciter ausprobieren, um die beste Kombination für Ihr Projekt zu finden. Jeder Exciter wird mit einem Montagepad mit Gewinde geliefert, das überall fest installiert werden kann. Die Installation ist einfach: Entfernen Sie das Pad von der Erregerbaugruppe, befestigen Sie das Pad mit 2 Schrauben oder mit dem 3M-Kleber an Ihrem Projekt und schrauben Sie die Erregerbaugruppe wieder auf das Pad! Die zerstörungsfreie Art der austauschbaren Halterung ermöglicht es Ihnen, verschiedene Erreger zu vergleichen oder nicht funktionierende Einheiten vor Ort auszutauschen, ohne eine Beschädigung Ihres Projekts oder der Erreger zu riskieren.
Dayton Audio EX25FHE2-4 IMS™ Framed High Efficiency 25mm Interchangeable Hardware Mount Exciter 24W
Dayton Audio EX25FHE2-4 IMS™ Framed High Efficiency 25mm Interchangeable Hardware Mount Exciter 24W 4 OhmChoose Dayton Audio's EX25FHE-4 IMS™ sound exciter to add dynamic sound to almost any object or surface! Key FeaturesSmall size; just under 2" diameter, about 7/8" high Exclusive IMS™ Interchangeable mount allows you to A/B test different exciters Rare-earth neodymium motor and a proprietary voice coil 24 watt RMS power handling for high output Easily swap non-functional units out in the field 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M VHB™ adhesive for quick, durable installation Test the limits of your imagination and turn any surface into a great sounding speaker system Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS™ Interchangeable Mount exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system allows you to try out the assortment of exciters offered by Dayton Audio! Aural Excitement Dayton Audio's 25 mm EX25FHE2-4 IMS™ coin type exciter features the ability to turn nearly any surface into a speaker, this exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. Exclusive IMS™ Interchangeable Mounting SystemWith Dayton Audio's exclusive IMS™ interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M Adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters. Orten, die man sich nie vorstellen konnte: Spielzeug, Monitore, Schranktüren... sogar Fenster! Durch den Einsatz eines Neodym-Magneten wird ein maximaler magnetischer Fluss um die firmeneigene Schwingspule erzeugt, was zu einer höheren Empfindlichkeit im Vergleich zu Excitern ähnlicher Größe führt. Dies wiederum reduziert den Leistungsbedarf und ermöglicht die Verwendung sehr kleiner Audioverstärker, ohne dass die Gesamtleistung beeinträchtigt wird. Die 1-Zoll-Schwingspule und die Kühlluftöffnungen ermöglichen eine höhere Eingangsleistung für Anwendungen mit höherer Ausgangsleistung bei gleichzeitiger Beibehaltung eines schlanken Formfaktors. Exklusives IMS™ System zur austauschbaren Befestigung Mit dem exklusiven, austauschbaren IMS™-Montagesystem von Dayton Audio können Sie viele verschiedene Konfigurationen, Platzierungen und Exciter ausprobieren, um die beste Kombination für Ihr Projekt zu finden. Jeder Exciter wird mit einem Montagepad mit Gewinde geliefert, das überall fest installiert werden kann. Die Installation ist einfach: Entfernen Sie das Pad von der Erregerbaugruppe, befestigen Sie das Pad mit 2 Schrauben oder mit dem 3M-Kleber an Ihrem Projekt und schrauben Sie die Erregerbaugruppe wieder auf das Pad! Die zerstörungsfreie Art der austauschbaren Halterung ermöglicht es Ihnen, verschiedene Erreger zu vergleichen oder nicht funktionierende Einheiten vor Ort auszutauschen, ohne eine Beschädigung Ihres Projekts oder der Erreger zu riskieren.
Dayton Audio DAEX13CT-4
Dayton Audio DAEX13-4CT Coin Type 13mm Exciter 3W 4 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX13CT-4 sound exciter, by Dayton Audio, is designed to turn small surfaces into a hidden sound source. Key Features Super small size; just over an inch in diameter, about 3/8" high Pre-applied 3M™ VHB™ adhesive for a quick, secure installation Rare-earth neodymium motor 4-ohm impedance for use with small, Class D amplifiers Dayton Audio DAEX13CT-4 Coin Type 13mm Exciter 3W 4 Ohm Dayton Audio's 13 mm DAEX13CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Its 4-ohm nominal impedance facilitates the use of series and series-parallel wired arrays for a highly focused, minimum dispersion sound pattern. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 3 watts RMS • VCdia: 13 mm • Nominal impedance: 4 ohms • Re: 3.6 ohms • Le: 0.04 mH • Fs: 650 Hz • Dimensions: 1.04" (26.3 mm) dia. x 0.374" (9.5 mm) H • Adhesive dimensions: 0.62" (15.7 mm) outside diameter • Weight: 12.5 grams.
Dayton Audio DAEX58FP
Dayton Audio DAEX58FP Flat Pack 58mm Exciter 25W 8 Ohm Dayton Audio's DAEX58FP Flat Pack exciter is the perfect choice to turn virtually any solid object into a speaker by vibrating it at speeds of up to 20,000 cycles per second. The DAEX58FP allows for the placement of sound where depth and space is limited. Key Features Super small size with low profile height 8 ohm impedance for use in almost any amplifier Includes mounting plate Adds sound to any surface Dayton Audio DAEX58FP Flat Pack 58mm Exciter 25W 8 Ohm Ideal for commercial or residential sound applications, the Dayton Audio DAEX58FP Flat Pack exciter easily mounts to most any surface using adhesives (3M tape or gel glue recommended) or screw mounted. A 2-1/4" square plate can be attached to virtually any flat surface to produce amazing sound, creating a speaker from most any surface area. Surface materials include: cardboard, glass, wood, steel, sheet rock, and more. The 58 mm exciter is heavily used in the automotive, industrial, point-of-sale, retail display, marine, aeronautical industry, digital signage, and art field, along with many other applications where space and depth limitations are a concern. The flat surface of this transducer can be glued, screwed or double face taped to a wide variety of surfaces to suit almost endless needs. Surfaces include metal cabinets, glass panes, picture frames, wood tiles, under table surfaces, inside display cabinets, cardboard signs, sheet metal and much more. Typical Applications: • Retail display cases and store fronts • Public exhibits • Self service counters • Digital signage Specifications: • Power handling: 25 watts RMS/40 watts max • Impedance: 8 ohm • Le: 0.47 mH • Fs: 240 Hz • Voice coil diameter: 1.28" • Dimensions: Overall: 2.28" x 2.28" square, Depth: 0.79" • Mounting pattern: 2" x 2".
Dayton Audio EX30HESF2-4 IMS™ High Efficiency Steered Flux Interchangeable Hardware Mount Exciter 30
Dayton Audio EX30HESF2-4 IMS™ High Efficiency Steered Flux Interchangeable Hardware Mount Exciter 30mm 40W 4 OhmThe EX30HESF2-4 IMS™ 30 mm steered high flux exciter is one of the most powerful in Dayton Audio's line of exciters capable of handling up to 40 watts. A pre-attached 3M VHB™ adhesive ring and Interchangeable mounting system combines with four screw-down mounting tabs for maximum energy transfer. Key FeaturesSmall size; just under 2" diameter Exclusive IMS™ Interchangeable mount allows you to A/B test different exciters Rare-earth neodymium motor and a proprietary voice coil High output exciter design handles up to 40 watts RMS Easily swap non-functional units out in the field 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M VHB™ adhesive for quick, durable installation Test the limits of your imagination and turn any surface into a great sounding speaker system Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS™ Interchangeable Mount exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system allows you to try out the assortment of exciters offered by Dayton Audio! Aural ExcitementDayton Audio's EX30HESF-4 IMS™ steered high flux exciter is one of our most powerful. This steered high flux exciter incorporates a 4 ohm voice coil for use with medium sized amplifiers to extract maximum power. A wide frequency response is permitted due to this exciter's low inductance of only 0.3 mH. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output.Exclusive IMS™ Interchangeable Mounting SystemWith Dayton Audio's exclusive IMS™ interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M Adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters. Ausführungen verwendet werden, um ein bestehendes, nicht-audio-spezifisches Projekt einfach zu beschallen oder ein tragbares Lautsprechersystem zu erstellen. Das einzigartige Montagesystem ermöglicht es Ihnen, das Sortiment der von Dayton Audio angebotenen Exciter auszuprobieren! Akustische Begeisterung Dayton Audios EX30HESF-4 IMS™ gesteuerter High-Flux Exciter ist einer unserer leistungsstärksten Exciter. Dieser gesteuerte High Flux Exciter verfügt über eine 4-Ohm-Schwingspule für den Einsatz mit mittelgroßen Verstärkern, um maximale Leistung zu erzielen. Die niedrige Induktivität von nur 0,3 mH ermöglicht einen weiten Frequenzgang des Erregers. Durch den Einsatz eines Neodym-Magneten wird ein maximaler magnetischer Fluss um die firmeneigene Schwingspule erzeugt, was zu einer höheren Empfindlichkeit im Vergleich zu Erregern ähnlicher Größe führt. Dies wiederum reduziert den Leistungsbedarf und ermöglicht die Verwendung sehr kleiner Audioverstärker, ohne dass die Gesamtleistung beeinträchtigt wird. Exklusives IMS™ System zur austauschbaren Befestigung Mit dem exklusiven, austauschbaren IMS™-Montagesystem von Dayton Audio können Sie viele verschiedene Konfigurationen, Platzierungen und Exciter ausprobieren, um die beste Kombination für Ihr Projekt zu finden. Jeder Exciter wird mit einem Montagepad mit Gewinde geliefert, das überall fest installiert werden kann. Die Installation ist einfach: Entfernen Sie das Pad von der Erregerbaugruppe, befestigen Sie das Pad mit 2 Schrauben oder mit dem 3M-Kleber an Ihrem Projekt und schrauben Sie die Erregerbaugruppe wieder auf das Pad! Die zerstörungsfreie Art der austauschbaren Halterung ermöglicht es Ihnen, verschiedene Erreger zu vergleichen oder nicht funktionierende Einheiten vor Ort auszutauschen, ohne eine Beschädigung Ihres Projekts oder der Erreger zu riskieren.
Dayton Audio DAEX25TP-4
Dayton Audio DAEX25TP-4 Tripod 25mm Exciter 20W 4 Ohm For turning larger surfaces into speakers, and more bass output, Dayton Audio's DAEX25TP-4 features three extended arms. Cooling vents draw air across the propietary voice coil for higher power handling. Key Features Unique, three arm design for exciting a large surface Pre-applied 3M™ VHB™ adhesive for quick, secure installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 20 watt RMS power handling for high output Dayton Audio DAEX25TP-4 Tripod 25mm Exciter 20W 4 Ohm Dayton Audio's DAEX25TP-4 tripod exciter is built with three arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the three arms ... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 20 watts RMS • VCdia: 25 mm • Nominal impedance: 4 ohms • Re: 4.2 ohms • Le: 0.10 mH • Fs: 233 Hz • Dimensions: 3.49" (88.71 mm) overall diameter x 0.83" (21 mm) total height • Weight: 82 grams
Dayton Audio TT25-16
Dayton Audio TT25-16 PUCK Tactile Transducer Mini Bass Shaker 16 Ohm The PUCK by Dayton Audio is a small tactile transducer or mini bass shaker that is intended to be used in Home Theater, Gaming, and Auto Sound applications. Now includes convenient surface mounting kit for quick and easy installation onto any flat surface. Key Features Add a new level of impact to games, home theaters, and car audio systems Includes surface mounting ring for quick installation onto flat surfaces Add tactile feedback to chairs and couches for the ultimate gaming and movie experience Small and easy to install even when space is at a minimum The PUCK™ by Dayton Audio is an inexpensive, small tactile transducer otherwise known as a mini bass shaker that is intended to be used in Home Theater, Gaming, and Auto Sound applications. This mini bass shaker has the unique ability to transfer low frequency sound waves directly to the listener by mounting the PUCK™ to surface areas that a listener's body will come into contact with. Because the listener "feels" the low frequency, the volume of the overall sound can be kept to a minimum without sacrificing the audio quality. The PUCK™ measures a mere 3-1/2" diameter and 1" depth, nearly identical in size to an ice hockey puck. The small depth and diameter of the PUCK™ mini bass shaker make it uniquely suited for tight spaces and unobtrusive applications. 4 layer Voice Coil with 1" aluminum former. Requires 6 #6 wood or sheet metal screws for surface mounting. Four PUCK™ transducers can be wired for Stereo 8 Ohm Right/Left 2 channel wiring or as a 4 Ohm 1 channel system. Includes Surface Mount Ring Kit (300-3882) to allow you to mount the PUCK transducer to any flat surface without the need for a mounting hole. Specifications: • Power handling: 15 watts RMS/30 watts max • Impedance: 16 ohms • Re: 14.9 ohms • Le: 2.93 mH @ 1k Hz • Fs: 40 Hz • Usable frequency response: 20-80 Hz • Force peak: 30 lbs. per ft. total when used in 4 PUCK configuration • Dimensions: 3.5" dia. x 1" H • Cutout Dimension: 70 mm with 25 mm slot for wire pass through • Consult owners manual for cut-out template and wiring information.
EX 45 S-8 Ohm
EX 45 S-8 OhmEX 45 S - 8 Ohms Art. No. 4501 Electrodynamic exciter for exciting plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be attached by gluing or screwing.
Dayton Audio HDN-8
Dayton Audio HDN-8 Weatherproof Sound Exciter Transducer Compact and extremely versatile, the HDN-8 Sound Exciter Transducer lets you create high-quality ‘hidden speakers’ in walls, ceilings, floors, furniture, seating, and virtually any other surface you can think of resulting in great invisible sound. Key Features Rugged plastic housing with flat black finish Coarse-threaded mounting stud for single-point mounting into almost any material Hermetically-sealed design for installation in wet or humid environments Dayton Audio HDN-8 Weatherproof Sound Exciter Transducer Unlike a tactile transducer that delivers 'shake' effects to your listening experience, the HDN-8 Sound Exciter Transducer is a full range, versatile, compact transducer that can excite a surface or structure over a wide bandwidth, enabling the creation of completely hidden audio systems in walls, ceilings, and floors. Its high power handling allows it to produce useful sound levels with a small number of transducers, and its hermetically-sealed design permits indoor or outdoor installation, even in wet or humid environments such as outside decking or an inside bath/shower installations. It features a single, coarse-threaded mounting stud that easily installs into wood, fiberglass, or plastic, and the 8-ohm impedance allows integration with conventional audio amplifiers. Specifications: • Frequency response: 40–15,000 (typical) • Sensitivity: varies by application • Dimensions: 4" W x 1.75" H • Impedance: 8 ohms • Power handling: 50 watts RMS / 100 watts maximum. Frequency response is dependent upon the resonant nature of the material the HDN-8 is mounted to, as well as the type of environment and mounting configuration selected. Additional information: The HDN-8 is a transducer that produces sound through resonating surface area. The surface area and material act as a carrier for the sound energy. Because the sound is through resonation rather than vibration, the surface material will move no more than .01 inch. This is less than most surfaces contracting naturally from humidity and changes in the weather. If mounted behind drywall there will be no damage to the drywall joints or drywall screws. Because the HDN-8 is not designed using a cone or surround, there are no parts that are susceptible to damage. Every HDN-8 is fully tested at the factory to perform to manufactured specifications.
Dayton Audio Tactile Bass Shaker BST-2
Dayton Audio BST-2 Tactile Bass Shaker 35 Watt Elevate your home theater and gaming systems to a whole new level with Dayton Audio's BST-2 bass shaker. The BST-2 tactile transducer allows you to feel ultra-low bass frequencies without requiring the extremely high SPL levels that are necessary when using just a subwoofer. Add Dayton Audio's BST-2 bass shaker to any sound system to truly feel what you have been missing. Key Features Increase the realism of home theater and gaming systems for a more immersive experience Add low frequency tactile impact without ridiculous SPL levels Cast aluminum housing dissipates heat for reliable performance Attached 24” leads for easy connections in hard to reach installations Easy to install on any flat surface Dayton Audio BST-2 Tactile Bass Shaker 35 Watt The human ear has the ability to hear a wide range of sounds, however, some sound is simply too low to hear and must be felt through the body. Feeling this extremely low frequency sound adds a new dimension to your listening, gaming, and movie experiences. Dayton Audio's BST-2 tactile transducer allows you to feel everything you have been missing without requiring giant subwoofers and outrageous SPL levels. By installing a BST-2 to chairs or a couch you can create a more immersive experience by augmenting the existing low frequency output of your speakers or headphones with powerful tactile feedback. Accentuating effects like the power of an explosion, a dinosaur footstep's rumble, the impact of a punch, and even subtle nuances of distant thunder, Dayton Audio's BTS-2 will make you feel like you are in the middle of the action. The BST-2 has 4 mounting holes to make it easy to install securely onto any flat surface. The mounting plate includes a foam gasket to ensure that there are no buzzes or rattles even under the most intense vibration. A dual suspension design keeps the mass moving in a linear fashion to deliver an incredible amount of tactile feedback without unwanted noise. Excess heat from the voice coil is dissipated through the rugged cast aluminum housing for a long life and reliable performance. Additional Notes and Suggestions: • 80 Hz or under low pass crossover is recommended to reduce undesired high frequency output • Recommended Amplifiers: Dayton Audio SA70 for one to two BST-2 bass shakers, Dayton Audio APA150 for four BTS-2 bass shakers (wired in series-parallel for a 4 ohm load), and a Dayton Audio BSA-200 for six BST-2 bass shakers (wired in series-parallel for a 6 ohm load). Specifications: High Grade Aluminum Housing Frequency response: 10-80 Hz Fs (unmounted): 30 Hz Impedance: 4 Ohms Power handling: 35 Watts RMS Peak force: 25 lbs. per ft. Weight: 2.6 lbs Dimensions: 5.15" diameter x 2.16" high Mounting holes 5" center to center
Dayton Audio DAEX-9-4SM
Dayton Audio DAEX-9-4SM Haptic Feedback Transducer 9mm 1W 4 Ohm Add audio to products and projects you never thought possible with the ultra-small Dayton Audio DAEX-9-4SM exciter. Measuring in at only 0.5" wide by 1" long and just 0.25" deep this exciter can fit almost anywhere. This exciter is also perfect for creating haptic feedback systems. Key Features Extremely small design can fit almost anywhere Perfect for creating haptic (touch) feedback systems Unique suspension allows high excursion for surprisingly powerful response Rare-earth neodymium motor and a proprietary 9 mm voice coil 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M™ VHB™ adhesive for quick, durable installation Dayton Audio DAEX-9-4SM Haptic Feedback Transducer 9mm 1W 4 Ohm Dayton Audio's DAEX-9-4SM exciter will allow you to add audio or haptic (tactile) feedback to even the smallest projects. This 9 mm exciter is an ideal option when designing pocket sized personal speakers or for adding audio to small art projects and models. At only 0.5" wide by 1" long, this exciter is even perfect for use in virtual reality haptic feedback systems such as gloves and headsets. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The unique suspension is capable of high physical excursion to allow this extremely small and lightweight exciter to deliver an impressive amount of force while remaining linear. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 1 watt RMS • VCdia: 9 mm • Nominal impedance: 4 ohms • Re: 3.6 ohms • Le: 0.013 mH • Fs: 1,200 Hz • Dimensions: 0.51" (13 mm) W x 1.05" (26.5 mm) L x 0.22" (5.75 mm) H • Adhesive dimensions: 0.46" (11.75 mm) outside diameter • Weight: 2.3 grams.
Dayton Audio BCE-1 22 x 14mm Bone Conducting Exciter
Dayton Audio BCE-1 22 x 14mm Bone Conducting Exciter Dayton Audio BCE exciters produce sound through direct vibration of the bones in the head or are capable of converting surfaces into speakers via vibration when placed on materials such as desks, walls, doors, and many other materials. Key Features Creates sound using bone conduction Leaves ears free for increased listener safety Can be used as a mini tactile transducer when attached to substrates Wide 300 to 19,000 Hz frequency response 4 ohm impedance with 1W power handling Dayton Audio BCE-1 22 x 14mm Bone Conducting Exciter Unlike conventional transducers that use moving air to produce sound around you, Dayton Audio BCEs (bone conducting exciters) convert the electrical signal into mechanical vibrations so clean, that the brain interprets the vibrating stimulus as excellent sound. Listener's ears are left free to remain aware of their surroundings, increasing personal safety. When used against materials such as cardboard, wood, steel, and plastics, the BCE operates much like a surface exciter, capable of moving mass to produce robust sound output; much like an invisible speaker! BCEs are excellent for unique OEM sound applications and for the experimenter, where conventional speakers and exciters cannot be used due to size constraints. Note: The frequency response is given when used as a bone conducting transducer. This will change when attached to a substrate, and different substrate materials will have different frequency responses. Polarity is indicated by a small half-moon above the positive solder point. Specifications: • Power handling: 1 watt RMS/2 watt max • Le: 0.56 mH • Impedance: 4 ohm • Re: 3.99 ohms • Frequency response: 300-19,000 Hz • Magnet weight: 0.49 oz. • Fs: 2,100 Hz • Dimensions (L x W x H): 0.85" x 0.57" x 0.31".
Tectonic TEAX14C02-8 Haptic Feedback Transducer 14mm 2W 8 Ohm
Tectonic's 14 mm, 8 ohm TEAX14C02-8 exciter is designed be used with tablet PCs, eBooks, and appliance control panels. Bending waves, and sound, generated by the TEAX14C02-8 brings life to devices. Key Features Larger size for larger surfaces and 2 watt RMS power handling Great for with tablet PCs and e-Book readers Designed to be used with tablet PCs, eBooks, and appliance control panels, the bending waves generated by the TEAX14C02-8 brings life to devices. Adhesive is pre-applied for permanent device attachment, and the 9.55 mm (3/8") thickness is enhanced by a neodymium motor to accommodate into existing designs. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 2W RMS, 4W max • Nominal impedance: 8 ohms • Dimensions (H x W x L): 9.55 x 19.5 x 40.2 mm.
Dayton Audio DAEX32SQ-8
Dayton Audio DAEX32SQ-8 Square Frame 32mm Self SupportingExciter 10W 8 OhmTurn almost anything with a flat surface into a speaker. The Dayton Audio DAEX32SQ-8 square frame exciter uses a 2-layer 1-1/4" voice coil for high power handling. The square frame design provides additional support for the motor assembly to produce lower distortion when driven to its limits. Key FeaturesExtended range and wide dispersion 32 mm 2 layer voice coil for high, 10 watts RMS, power handling Pre-applied 3M VHB adhesive for quick, secure installation 8 ohms impedance for easy connection to most amplifiers Dayton Audio's DAEX32SQ-8 square frame 32 mm exciter gives you the ability to turn almost any solid surface into a truly invisible high-fidelity speaker. With a 1-1/4" 2-layer voice coil this exciter is capable of great power handling and impressive overall output capability. The square frame design gives this exciter additional mounting area to help support the powerful motor assembly and provide improved linearity when mounted to vertical surfaces. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1.25" voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick!Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.Specifications:• Power handling: 10 watts RMS • VCdia: 1.25" (32 mm) • Nominal impedance: 8 ohms • Re: 8 ohms • Le: 0.51 mH • Fs: 481 Hz • Dimensions: 2" (51 mm) W x 2.43" (61.8 mm) H x 0.89" (22.5 mm) D • Weight: 130 grams.:- Belastbarkeit: 10 Watt RMS - VCdia: 1,25" (32 mm) - Nennimpedanz: 8 Ohm - Re: 8 Ohm - Le: 0,51 mH - Fs: 481 Hz - Abmessungen: 51 mm (2") B x 61,8 mm (2,43") H x 22,5 mm (0,89") T - Gewicht: 130 Gramm.
Dayton Audio BST-300EX Extrem leistungsstarker Profi-Taktil-Bass-Shaker 300 Watt
The BST-300EX is a powerful bass shaker designed for serious audio enthusiasts. With an impressive 300W of power, it delivers extreme bass that will immerse you in your favorite movies, games, and music. The inaudible operation ensures a seamless experience, while the easy mounting makes installation a breeze. Key Features Powerful and advanced bass shaker designed for serious home theaters, racing/gaming rigs, and car audio Capable of handling 300 watts, offering more powerful bass Highly efficient design providing great bass response at a reasonable price Inaudible operation while providing large amounts of bass for an immersive experience Easy mounting for quick setup Are you ready to take your home theater, gaming rig, or car audio system to a whole new level? Look no further than the BST-300EX, the biggest bass shaker you'll find. With an astounding 300W of power, the BST-300EX is specifically designed to deliver mind-blowing bass in the most demanding environments. Feel the Tremors, Hear the Silence Experience the depths of sound like never before. The BST-300EX is engineered from the ground up to compete in serious home theaters, racing/gaming rigs, and car audio setups. It's your gateway to an immersive audio experience that will leave you breathless. With the BST-300EX, you'll feel more of the "super low end" surpassing the capabilities of its peers. Think Big The BST-300EX is the ultimate upgrade from the BST-1, designed to redefine immersive sound, this powerful bass shaker delivers an unmatched level of performance. With a robust 300W output and a larger form factor, the BST-300EX unleashes deep, resonating bass that fills your space with breathtaking richness. Feel the impact as every sound comes to life, from the subtlest notes to the most explosive moments. Unveiling the Inner Workings Inside the all-metal housing is the heart of the BST-300EX; a magnetic puck is suspended between 2 durable nylon spiders, all enclosed within a former wrapped with a powerful voicecoil. Applying signal to the voicecoil sets the magnetic puck in motion along it's 35mm path of travel, dispersing incredible bass energy into any surface it's installed on. Shorting rings contain the magnetic B-field, keeping the energy concentrated within the former which increases motor force, further increasing output. This engineering marvel converts electrical signals into tangible waves of sonic power, taking your audio experience to new depths of immersion. Effortless Mounting, Maximum Convenience We understand the importance of simplicity and ease when it comes to installation, that's why we've made mounting the BST-300EX a breeze. Spend less time on setup and more time enjoying the thunderous vibrations that will enhance your audio experience.
Dayton Audio DAEX32Q-8
Dayton Audio DAEX32Q-8 Dual Steel Spring Balanced 32mm Exciter 20W 8 Ohm When applied to vertical surfaces the Dayton Audio DAEX32Q-8 dual spring balanced exciter has more linear movement to deliver extremely accurate response while producing lower distortion. Key Features Dual steel spider design to better support the large neodymium motor 32 mm two layer voice coil for high, 20 watts RMS, power handling Pre-applied 3M™ VHB™ adhesive for quick, secure installation 8 ohm impedance for easy connection to most amplifiers Dayton Audio DAEX32Q-4 Dual Steel Spring Balanced 32mm Exciter 20W 4 Ohm The DAEX32Q-4 from Dayton Audio can turn most rigid, flat surfaces into a speaker. Designed specifically for mounting to vertical surfaces, this exciter uses a dual spring spider to better support the large neodymium motor providing improved linearity. With a 2-layer 32 mm voice coil, this exciter can handle up to 40 watts peak for high output even when attached to thicker surfaces. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M™ VHB™ (Very High Bond) adhesive is pre-applied... just peel and stick! This exciter is perfect for turning whatever you can imagine into a speaker such as cabinet doors, monitors, windows, garage doors, ect… Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 20 watts RMS, 40 watts peak • VCdia: 32 mm • Nominal impedance: 4 ohms • Re: 3.2 ohms • Le: 0.22 mH • Fs: 320 Hz • Dimensions: 2.38" (60.5 mm) dia. x 0.78" (19.9 mm) H • Adhesive dimensions: 1.26" (32 mm) outside diameter, 0.9" (23 mm) inside diameter • Weight: 132.6 grams.
Tectonic TEAX09C005-8 Haptic Feedback Transducer 9mm 0.5W 8 Ohm
Tectonic 9 mm, 8 ohm TEAX09C005-8 miniature exciter is designed be used with tablet PCs, eBooks, and appliance control panels. Bending waves, and sound, generated by the TEAX09C005-8 brings life to devices. Key Features Popular for use with appliance controls Great for use on tablet PC and e-Book reader touchscreens Designed to be used with tablet PCs, eBooks, and appliance control panels, the bending waves generated by the TEAX09C005-8 brings life to devices. 3M adhesive is pre-applied for permanent device attachment, and the 6 mm (under 1/4") thickness is enhanced by a neodymium motor to accommodate into existing designs. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 0.5W RMS, 1W max • Nominal impedance: 8 ohms • Dimensions (H x W x L): 6 x 12 x 26 mm.
Dayton Audio DAEX13CT-8
Dayton Audio DAEX13-8CT Coin Type 13mm Exciter 3W 8 Ohm Take your product or project to the next level by turning it into a speaker! The DAEX13CT-8 sound exciter, by Dayton Audio, is designed to turn small surfaces into a hidden sound source. Key Features Super small size; just over an inch in diameter, about 3/8" high Pre-applied 3M™ VHB™ adhesive for a quick, secure installation Rare-earth neodymium motor 8-ohm impedance for use with small, Class D amplifiers Dayton Audio DAEX13CT-8 Coin Type 13mm Exciter 3W 8 Ohm Dayton Audio's 13 mm DAEX13CT-8 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Its 8-ohm nominal impedance facilitates the use of series and series-parallel wired arrays for a highly focused, minimum dispersion sound pattern. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 3 watts RMS • VCdia: 13 mm • Nominal impedance: 8 ohms • Re: 7.3 ohms • Le: 0.08 mH • Fs: 775 Hz • Dimensions: 1.04" (26.3 mm) dia. x 0.374" (9.5 mm) H • Adhesive dimensions: 0.62" (15.7 mm) outside diameter • Weight: 12.5 grams.
Dayton Audio EX25VT2-4 IMS™ Vented 25mm Interchangeable Hardware Mount Exciter 20W 4 Ohm
Dayton Audio EX25VT2-4 IMS™ Vented 25mm Interchangeable Hardware Mount Exciter 20W 4 OhmTake your product or project to the next level by turning it into a speaker! The EX25VT2-4 is designed by Dayton Audio with the exclusive IMS™ Interchangeable mounting system as well as voice coil cooling air vents, for high-power applications. Key FeaturesSmall size; just over 2" diameter, about 7/8" high Exclusive IMS™ Interchangeable mount allows you to A/B test different exciters Rare-earth neodymium motor and a proprietary voice coil 20 watt RMS power handling for high output Easily swap non-functional units out in the field 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M VHB™ adhesive for quick, durable installation Test the limits of your imagination and turn any surface into a great sounding speaker system Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS™ Interchangeable Mount exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system even allows you to try out the assortment of exciters offered by Dayton Audio! Aural ExcitementDayton Audio's 25 mm EX25VT2-4 IMS™ coin type exciter features the ability to turn nearly any surface into a speaker, this exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil, and cooling vents, allows for more input power for higher output applications while maintaining a slim-line form factor.Exclusive IMS™ Interchangeable Mounting SystemWith Dayton Audio's exclusive IMS™ interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M VHB™ Adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters. Ausführungen verwendet werden, um ein bestehendes, nicht-audio-spezifisches Projekt zu beschallen oder ein tragbares Lautsprechersystem zu erstellen. Das einzigartige Montagesystem ermöglicht es Ihnen sogar, das Sortiment der von Dayton Audio angebotenen Exciter auszuprobieren! Akustische Begeisterung Dayton Audio's 25 mm EX25VT2-4 IMS™ Coin Type Exciter bietet die Möglichkeit, nahezu jede Oberfläche in einen Lautsprecher zu verwandeln. Die geringe Größe dieses Exciters ermöglicht die Audiowiedergabe an Orten, die man sich nie vorstellen konnte: Spielzeug, Monitore, Schranktüren... sogar Fenster! Durch den Einsatz eines Neodym-Magneten wird ein maximaler magnetischer Fluss um die firmeneigene Schwingspule erzeugt, was zu einer höheren Empfindlichkeit im Vergleich zu Excitern ähnlicher Größe führt. Dies wiederum reduziert den Leistungsbedarf und ermöglicht die Verwendung sehr kleiner Audioverstärker, ohne dass die Gesamtleistung beeinträchtigt wird. Die 1-Zoll-Schwingspule und die Kühlluftöffnungen ermöglichen eine höhere Eingangsleistung für Anwendungen mit höherer Ausgangsleistung bei gleichzeitiger Beibehaltung eines schlanken Formfaktors. Exklusives IMS™ System zur austauschbaren Befestigung Mit dem exklusiven IMS™-Montagesystem von Dayton Audio können Sie viele verschiedene Konfigurationen, Platzierungen und Erreger ausprobieren, um die beste Kombination für Ihr Projekt zu finden. Jeder Erreger wird mit einem Montagepad mit Gewinde geliefert, das überall fest installiert werden kann. Die Installation ist einfach: Entfernen Sie das Pad von der Erregerbaugruppe, befestigen Sie das Pad mit 2 Schrauben oder mit dem 3M VHB™-Kleber an Ihrem Projekt und schrauben Sie die Erregerbaugruppe wieder auf das Pad! Die zerstörungsfreie Art der austauschbaren Halterung ermöglicht es Ihnen, verschiedene Erreger zu kombinieren oder nicht funktionierende Einheiten vor Ort auszutauschen, ohne eine Beschädigung Ihres Projekts oder der Erreger zu riskieren.
Tectonic TEAX19C01-8 19mm Metal Cup Exciter 8 Ohm
The Tectonic TEAX19C01-8 exciter employs proprietary technologies and premium materials to produce a transducer that converts almost any surface into an audio loudspeaker. Key Features Small size for use where speakers wouldn't be possible Turn any surface into a HiFi speaker Tectonic 19 mm TEAX19C01-8 exciter continues their tradition of making magical devices (Distributed Mode Loudspeakers) that turn virtually any surface into a high fidelity loudspeaker. The exciter's small size enables audio reproduction in applications where installing conventional speakers just isn't possible, such as windows, monitors—even picture frames! The TEAX19C01-8 exciter uses a neodymium magnet to increase magnetic flux around the voice coil. This results in increased sensitivity, which reduces power requirements and allows low power amplifiers to be used without sacrificing total output. 3M™ VHB™ tape is pre-installed on each exciter and offers unsurpassed surface adhesion while spreading the stress load across the entire length of the joint. This ensures maximum acoustic energy transfer between the transducer and the surface to which it is attached. Two terminals extend from the exciter for wire soldering purposes. Note: an exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and facilitate mid/tweeter response. Thicker, larger materials will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 3 watts RMS • VCdia: 19 mm • Nominal impedance: 8 ohms • Mounting ring: 0.875" dia. • Dimensions: 1.56" dia. (including terminals), 1.31" dia. (without terminals) x 0.5" (12.8 mm) H • Weight: 29 grams.
Dayton Audio DAEX25Q-4
Dayton Audio DAEX25Q-4 Quad Feet 25mm Exciter 20W 4 Ohm Dayton Audio's DAEX25Q-4 features four extended arms for turning larger surfaces into speakers, while providing more bass output . Spring-loaded speaker terminals facilitate quick electrical connection. Key Features Unique, four arm design for exciting a large surface Pre-applied 3M™ VHB™ adhesive for quick, secure installation Rare-earth neodymium motor and a proprietary voice coil 4-ohm impedance for use with small, Class D amplifiers 20 watt RMS power handling for high output Dayton Audio DAEX25Q-4 Quad Feet 25mm Exciter 20W 4 Ohm Dayton Audio's DAEX25Q-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick! Two spring-loaded terminals are built onto the main body for quick electrical connection. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 20 watts RMS • VCdia: 25 mm • Nominal impedance: 4 ohms • Re: 4.3 ohms • Le: 0.25 mH • Fs (uncoupled): 224 Hz • Dimensions: 3.99" (101.44 mm) overall diameter x 0.97" (24.7 mm) total height • Weight: 90.5 grams.
Dayton Audio DAEX25QLP-4
Dayton Audio DAEX25QLP-4 Quad Feet Low Profile 25mm Exciter 10W 4 Ohm Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX25QLP-4 4 ohm sound exciter improves power handling with a vented voice coil. Key Features Four arms provide extra support improving linearity 4 ohm impedance for use with small, Class D amplifiers Rare-earth neodymium motor and a proprietary vented voice coil Turns any flat, rigid surface into a speaker Dayton Audio DAEX25QLP-4 Quad Feet Low Profile 25mm Exciter 10W 4 Ohm Dayton Audio's DAEX25QLP-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). Also, the arms help to support the magnet/voice coil improving linearity when mounted on vertical surfaces. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1" voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick! Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications:• Power handling: 10 watts RMS • VCdia: 1" (25 mm) • Nominal impedance: 4 ohms • Re: 3.8 ohms • Le: 0.28 mH • Fs: 300 Hz • Dimensions: 2.75" (70 mm) overall diameter x 0.75" (19 mm) total height • Weight: 50 grams.
Tectonic TEAX13C02-8/RH 13mm Exciter 8 Ohms
The Tectonic TEAX13C02-8/RH 13 mm exciter provides a small, inexpensive means of turning flat panels of most compositions into an audio loudspeaker. Key Features Turn virtually any surface into a hi-fi speaker The exciter's high efficiency reduces power requirements Diminutive 1-1/4" diameter and 3/8" height for use in extremely tight spaces Tectonic 13 mm TEAX13C02-8/RH turns virtually any surface into a high fidelity loudspeaker. This exciter's extremely small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! The TEAX13C02-8/RH exciter employs a neodymium magnet for maximum magnetic flux around the voice coil and increased sensitivity. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, two-part epoxy is recommended. Two terminals extend from the exciter for wire soldering purposes. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 2 watts RMS • VCdia: 13 mm • Nominal impedance: 8 ohms • Dimensions: 1.25" (31.75 mm) dia. x 0.35" (9 mm) H • Weight: 10 grams.