EX 45 S-8 Ohm
EX 45 S-8 OhmEX 45 S - 8 Ohms Art. No. 4501 Electrodynamic exciter for exciting plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be attached by gluing or screwing.
SL 87 FE-8
SL 87 FE-88.5 cm (3.4“) full-range speaker with plastic diaphragm and rubber surround. Very highEfficiency through large ferrite magnet. Particularly balanced frequency response.Application possibilities: sound bars, small HiFi speakers.8.5 cm (3.4”) full-range speaker with plastic cone and rubber surround. Very high efficiency dueto large ferrite magnet. Well-balanced frequency response.Typische Anwendungen: Säulenlautsprecher, kleine HiFi-Systeme.
BSX 130 WP - 4 Ohm
BSX 130 WP - 4 OhmBSX 130 WP - 4 Ohms Art. No. 4515 Body sound transducers for bass reproduction. The installation is carried out on a surface capable of vibrating, whichthereby directly excited to vibrate (e.g. car body panel, sofa frame or similar).A closed enclosure is not necessary. With the BSX 130 WP - 4 Ohm, the lowestBass components, for example, can be physically felt during film playback.
Visaton BG 20 - 8 Ohm
20 cm (8") full-range speaker with tweeter cone. High efficiency. Suitable as a full range driver for small vocal and guitar monitors or as a midrange driver for PA systems and musician's cabinets. Possible applications: Midrange driver in PA systems and musician's cabinets.vocal and guitar monitorsFull range speaker for electronic organs and keyboards
BS 76 - 8 Ohm
BS 76 - 8 OhmsBS 76 - 8 Ohm Art. No. 4511 Body sound transducer for mid and high frequency reproduction. The installation (with M5 screw) is done ona vibratable surface, which is directly set into vibration. A closed enclosureis not necessary.
EX 30 S - 8 Ohm
EX 30 S - 8 OhmsEX 30 S - 8 Ohm Art. No. 4532 Electrodynamic exciter for exciting plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be attached by gluing or screwing.
EX 45 S-4 Ohm
EX 45 S-4 OhmEX 45 S - 4 Ohm Art. No. 4503 Electrodynamic exciter for exciting plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be attached by gluing or screwing.
EX 60 R-8 Ohm
EX 60 R-8 OhmEX 60 R - 8 Ohm Art. No. 4546 Electrodynamic exciter for exciting plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be attached by gluing or screwing.
EX 60 S-4 Ohm
EX 60 S-4 OhmEX 60 S - 4 Ohm Art. No. 4536 Electrodynamic exciter for exciting plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be attached by gluing or screwing.
EX 60 S-8 Ohm
EX 60 S-8 OhmEX 60 S - 8 Ohm Art. No. 4506 Electrodynamic exciter for stimulating plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be done by gluing or screwing.
EX 60 XWP-8 Ohm
EX 60 XWP-8 OhmEX 60 XWP - 8 Ohm Art. No. 4534 Elektrodynamic exciter for exciting plates to bending wave vibrations in a waterproofPlastic housing. The attachment of the exciter on the surface of the plate to be excited can be done byGluing or screwing can be done. Electrically, the exciter is controlled via a 1.5 m long supply line.
EX 80 S-8 Ohm
EX 80 S-8 OhmEX 80 S - 8 Ohm Art. No. 4541 Electrodynamic exciter for exciting plates to bending wave vibrations. The attachment of theExciters on the surface of the plate to be excited can be attached by gluing or screwing.
TIW 300-8
TIW 300-830 cm (12") high-end woofer with black cellulose cone, very large magnet system and powerfulAluminum die-cast basket. Through the multiple ventilation of the voice coil (pole core drilling, holes in thePole plate, openings in the aluminum die-cast basket for ventilation of the centering) reduce losses andFlow noise minimized. The voice coil former made of Kapton and the large 65 mm voice coilDiameter allows extremely high loads.
Visaton B 200 - 6 Ohm
B 200 - 6 Ohms20 cm (8") High-End-Broadband speaker. A highEfficiencyand a very balancedFrequency responsewithout large fluctuations characterize this high-end speaker. This is achieved through the very lightweight paper diaphragm, the fabric surround, and the optimized drive with a 25 mmVoice coil(Aluminum wire), which the magnetic field in theAir gapoptimal uses (voice coil overhang). TheVoice coil formermade of Kapton is ventilated. The sturdy aluminum die-cast basket not only looks good but also contributes to the ventilation of the centering with its openings, ensuring that mechanical losses are extremely low. Distortions remain consistently at an extremely low level. The B 200 is excellently suited for use in high-quality and powerful 1-way boxes, where, in addition to classic closed or vented enclosures, astonishing results can also be achieved with more exotic concepts such as horns or open baffles.
PAW 30 ND-8
30 cm (12") TiefmitteltönerEigenschaften 8-eckiger Druckgusskorb Papiermembran 75 mm Schwingspule für hohe Belastbarkeit Til Spulenträger Belüftete Zentrierspinne Zusätzlich belüfteter Luftspalt (8fach Bohrung) 10 mm Polkernbohrung M-förmig gefaltete Textilsicke für große Hübe Connex Zentrierspinne EVA Dichtung Neodym Magnet Impedanzkontrollring (Aluminium)