GRS 12SW-4HE 12" Lang-Hub Subwoofer 4 Ohm
The versatile 12SW-4HE 12” high excursion subwoofer from GRS is designed to produce excellent low frequency extension in a variety of designs. Suitable for both sealed and vented enclosures, this driver the ideal replacement or upgrade for your existing subwoofers with worn out or blown drivers. Featuring extensive venting, rubber surround, high temperature voice coil, low Fs, and 12.5 mm of excursion the 12SW-4HE is built for remarkable bass response on a budget.Key Features High excursion and low Fs to produce powerful low frequency output 4-layer 2” voice coil on a thick aluminum former to handle up to 250 watts RMS Venting under the spider, through the pole piece, and in the magnetic gap for excellent heat dissipation Durable reinforced paper cone with rubber surround produces reliable and consistent performance Extended frame and bumped back plate allow ample clearance for high excursion Engineered for extended low frequency response and flexibility, the 12SW-4HE 12” high excursion subwoofer from GRS is an ideal replacement driver for existing subwoofer systems or an excellent choice for new economical designs. Capable of producing powerful bass response in both sealed and vented designs, the 12SW-4HE is suitable as a drop-in replacement for most existing 12” subwoofers. The rigid paper cone is supported by a large diameter spider and rubber surround to keep excursion linear while providing reliable performance. An extended frame and bumped back plate allow ample mechanical clearance to avoid damage when driven to high excursion. With a high temperature 2” voice coil wound on a thick aluminum former the 12SW-4HE can comfortably handle up Der 12SW-4HE 12-Zoll-Subwoofer mit großer Auslenkung von GRS ist ein idealer Ersatztreiber für bestehende Subwoofersysteme oder eine ausgezeichnete Wahl für neue wirtschaftliche Designs. Der 12SW-4HE ist in der Lage, sowohl in geschlossenen als auch in belüfteten Ausführungen eine kraftvolle Basswiedergabe zu erzeugen und eignet sich als Ersatz für die meisten vorhandenen 12"-Subwoofer. Die starre Papiermembran wird von einer Spinne mit großem Durchmesser und einer Gummisicke unterstützt, um die Auslenkung linear zu halten und eine zuverlässige Leistung zu gewährleisten. Ein verlängerter Korb und eine ausgestellte Rückplatte bieten ausreichend mechanischen Spielraum, um Beschädigungen bei hohen Auslenkungen zu vermeiden. Mit einer hochtemperaturfesten 2-Zoll-Schwingspule, die auf einen dicken Aluminiumträger gewickelt ist, kann der 12SW-4HE bequem eine Leistung von bis zu 250 Watt RMS verarbeiten. Umfangreiche Belüftungsöffnungen im Rahmen, Polschuh und Magnetspalt leiten überschüssige Wärme ab, um die Leistungskompression auf ein Minimum zu beschränken, selbst wenn der Lautsprecher über einen längeren Zeitraum hinweg hart betrieben wird. Der GRS 12SW-4HE verfügt über eine unglaubliche Tieftonerweiterung und ist der perfekte Lautsprecher für echte Bässe zu einem günstigen Preis.
GRS PT2522-4
With a low mass diaphragm and powerful motor, the GRS PT2522-4 planar back tweeter delivers high efficiency output with excellent transient response. The open back construction produces true dipole radiation which is ideal for use in open baffle designs. Smooth frequency response and low distortion gives the PT2522-4 an incredibly natural but dynamic sound. Key Features Extremely low mass diaphragm provides excellent transient response and accuracy Large diaphragm produces high efficiency and wide bandwidth Remarkably flat response even at 30 degrees off axis Open back delivers true dipole radiation for use in open baffle designs Linear impedance simplifies crossover design Shallow mounting depth for use in low profile designs The GRS PT2522-4 open back planar tweeter is designed to deliver high efficiency with dynamic response. Thanks to a lightweight damped Polyethylene Naphthalate film diaphragm that is driven by 6 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and low distortion. The linear 3.4 ohm impedance makes crossover design simple and minimizes the number of components required to achieve your required roll off. In addition, the open back design gives this tweeter true dipole radiation making it the perfect choice for use in open baffle speaker designs. The PT2522-4 is a perfect choice for use as a drop in replacement in existing systems or for use in new designs where low distortion and accurate response is needed.
GRS PT6816-8
Capable of delivering wide bandwidth with low distortion, the GRS PT6816-8 open back planar driver has the ability to perform well from upper midrange to the highest frequencies. With an extremely lightweight diaphragm and a neodymium motor system, this driver is capable of excellent transient response with amazing dynamics. The open back construction produces true dipole radiation which is ideal for use in open baffle designs. With a narrow footprint and minimal flange, the PT6816-8 is also ideal for line array use. Key Features Extremely low mass diaphragm provides excellent transient response and accuracy Narrow design to deliver excellent off axis consistency Multiple neodymium magnets in push pull arrangement for incredible control and low distortion Open back delivers true dipole radiation making this driver ideal for open baffle line array designs Linear impedance simplifies crossover design Shallow mounting depth for use in low profile designs The GRS PT6816-8 open back planar midrange/tweeter is designed to deliver low distortion with dynamic response. Thanks to a lightweight damped polyimide diaphragm that is driven by 18 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and wide bandwidth. The almost linear 6.4 ohm impedance makes crossover design simple and minimizes the number of components required to achieve your required roll off. In addition, the open back design gives this tweeter true dipole radiation making it the perfect choice for use in open baffle speaker designs. With wide dispersion capabilities and minimal mounting flange, the PT6816-8 is an excellent choice for use in high output line arrays.
GRS PT2522-FP Face Plate for PT2522-4 and PT2522C-4 Planar Tweeters
By attaching the GRS PT2522-4 or PT2522C-4 planar tweeter to the PT2522-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Key FeaturesAluminum faceplate for the GRS PT2522-4 and PT2522C-4 planar tweeters Simplifies the complicated profile of the PT2522/C for easy mounting Instantly improve the looks of any project Does not effect output when installed All mounting hardware included Tweeter not included Hochtöner nicht enthalten
GRS PT2522C-4
With a low mass diaphragm and powerful motor, the GRS PT2522C-4 planar sealed back tweeter delivers high efficiency output with excellent transient response. The low profile sealed back allows this tweeter to be installed easily into conventional speakers without the need for a separate sub-enclosure. Remarkably smooth frequency response gives the PT2522C-4 an incredibly natural but dynamic sound. Key Features Extremely low mass diaphragm provides excellent transient response and accuracy Large diaphragm produces high efficiency and wide bandwidth Multiple neodymium magnets in push pull arrangement for incredible control and low distortion Remarkably flat response even at 30 degrees off axis Linear impedance simplifies crossover design Shallow mounting depth for use in low profile designs The GRS PT2522C-4 sealed back planar tweeter is designed to deliver high efficiency with extremely smooth response. Thanks to a lightweight damped Polyethylene Naphthalate film diaphragm that is driven by 6 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and low distortion. The linear 3.4 ohm impedance makes crossover design simple and minimizes the number of components required to achieve your required roll off. In addition, the low profile sealed rear chamber isolates the rear side of the diaphragm for simple installation into conventional enclosures. The PT2522C-4 is a perfect choice for use as a drop in replacement in existing systems or for use in new designs where low distortion and accurate response is needed.
GRS PT6816-FP Face Plate for PT6816-8 Planar Tweeter
By attaching the GRS PT6816-8 planar tweeter to the PT6816-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project! Key Features Aluminum faceplate for the GRS PT6816-8 planar tweeter Simple design for easy mounting Instantly improve the looks of any project Does not effect output when installed All mounting hardware included Tweeter not included
GRS PT6825-8 8" Planar Mid/Tweeter 8 Ohm
Capable of delivering extremely wide bandwidth with low distortion, the GRS PT6825-8 open back planar driver is designed to deliver natural midrange response while remaining accurate to the highest frequencies. With an extremely lightweight diaphragm and a neodymium motor system, this driver is capable of excellent transient response with amazing dynamics. The open back construction produces true dipole radiation which is ideal for use in open baffle designs. Key Features Extremely low mass diaphragm provides excellent transient response and accuracy Large diaphragm produces high efficiency with incredible dynamics Remarkably wide bandwidth for controlled transition to woofer and tweeter drivers Open back delivers true dipole radiation for use in open baffle designs Linear impedance simplifies crossover design Shallow mounting depth for use in low profile designs With the ability to provide low distortion output from 500-20,000 Hz, the GRS PT6828-8 open back midrange/tweeter is an excellent choice for use in 2-way designs or even as a drop in replacement in many existing systems. Thanks to a lightweight damped polyimide diaphragm driven by 30 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and detail. With a nearly linear 6.4 ohm impedance keeps crossover design simple with predictable final results. In addition, the open back design gives this midrange/tweeter true dipole radiation making it the perfect choice for use in high end open baffle speaker designs.
GRS PT5010-8 10" Planar Mid/Tweeter 8 Ohm
Capable of delivering extremely wide bandwidth with low distortion, the GRS PT5010-8 open back planar driver is designed to deliver natural midrange response while remaining accurate to the highest frequencies. With an extremely lightweight diaphragm and a neodymium motor system, this driver is capable of excellent transient response with amazing dynamics. The open back construction produces true dipole radiation which is ideal for use in open baffle designs Key Features Extremely low mass diaphragm provides excellent transient response and accuracy Large diaphragm produces high efficiency with incredible dynamics Remarkably wide bandwidth for predictable transition to woofer and tweeter drivers Open back delivers true dipole radiation for use in open baffle designs Linear impedance simplifies crossover design Shallow mounting depth for use in low profile designs With the ability to provide low distortion output from 300-8,000 Hz, the GRS PT5010-8 open back midrange/tweeter is an excellent choice for use in 2-way designs or even as a drop in replacement for many existing systems. Thanks to a lightweight damped Polyethylene Naphthalate film diaphragm driven by 56 powerful neodymium magnets in a push-pull arrangement, this driver is capable of incredible transient response and detail. With a nearly linear 6.8 ohm impedance keeps crossover design simple with predictable final results. In addition, the open back design gives this midrange/tweeter true dipole radiation making it the perfect choice for use in high end open baffle speaker designs.
GRS PT6825-FP Face Plate for PT6825-8 Planar Tweeter
By attaching the GRS PT6825-8 Planar tweeter to the PT6825-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Key FeaturesAluminum faceplate for the GRS PT6825-8 planar tweeter Simple design for easier flush mounting Instantly improve the looks of any project Does not effect output when installed All mounting hardware included Tweeter not included Hochtöner nicht enthalten
GRS RT3.0-8 Hi-Res Neo Ribbon Tweeter 8 Ohm
GRS's premium "Hi-Res" ribbon tweeters with the latest in materials and motor technology easily reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system! Key Features 2.3kHz to 40kHz frequency response for true "Hi-Res" detail Powerful neodymium magnets deliver high efficiency and incredible dynamics Remarkably thin ribbon diaphragm provides accurate transient detail High sensitivity for increased SPL Output Built-in grill protects the delicate ribbon from fingers and other foreign objects Optional silver faceplate available Hi-Res. High-Value. GRS has released a line of premium "Hi-Res" ribbon tweeters employing the latest in materials and motor technology> The GRS Hi-Res Ribbon Tweeters effortlessly reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system. This is achieved by employing incredibly light and thin diaphragms, high grade neodymium motor and attention to detail in the assembly process. The GRS Hi-Res Ribbon Tweeters are perfect for those looking for the "Hi-Res" detail in their loudspeaker system! Frequency Response & Impedance The GRS Neo Ribbon Tweeters have an extended frequency response that reaches up to 40kHz, this allows the tweeter to provide better transient detail and less roll-off at 20kHz than you’d normally get with typical tweeters. The relatively flat impedance curve also makes crossover design incredibly simple, with no awkward loads to work around! Above and beyond As audio technology improves beyond the imagination of the last generation, GRS is here to keep you up to spec! With a diaphragm thickness of 0.03mm made from pure aluminum foil, the GRS Hi-Res Neo Ribbon Tweeters take advantage of the latest in materials and motor technology to bring you a tweeter that plays faithfully up to 40kHz!
GRS PT5010-FP Face Plate for PT5010-8 Planar Tweeter
By attaching the GRS PT5010-8 planar tweeter to the PT5010-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Key FeaturesAluminum faceplate for the GRS PT5010-8 planar tweeter Simple design for easier flush mounting Instantly improve the looks of any project Does not effect output when installed All mounting hardware included Tweeter not included Hochtöner nicht enthalten
GRS RT2.0-8 Hi-Res Neo Bändchenhochtöner 8 Ohm
GRS RT2.0-8 Hi-Res Neo Ribbon Tweeter 8 OhmThe high-quality "Hi-Res" ribbon tweeters from GRS with state-of-the-art material and motor technology effortlessly reach frequencies of 40 kHz and beyond, giving your hi-fi system incredible detail!Key Features 2.3kHz to 40kHz frequency response for true Hi-Res" details Powerful neodymium magnets ensure high efficiency and incredible dynamics Remarkably thin ribbon diaphragm for accurate transient details High sensitivity for increased SPL power Built-in grille protects the sensitive ribbon from fingers and other foreign objects Optional silver front panel available Hi-Res. High quality. GRS has launched a range of high-quality "Hi-Res" ribbon tweeters that utilize the latest materials and motor technologies. The GRS Hi-Res ribbon tweeters effortlessly reach frequencies of 40 kHz and beyond, adding incredible detail to your HiFi system. This is achieved through the use of incredibly light and thin diaphragms, high-quality neodymium motors, and attention to detail in assembly.The GRS Hi-Res ribbon tweeters are perfect for anyone looking for the "Hi-Res" detail in their speaker system! Frequency Response & Impedance The GRS Neo ribbon tweeters have an extended frequency response that reaches up to 40kHz. This allows the tweeter to provide better detail reproduction in the transient response and less roll-off at 20kHz than typical tweeters. The relatively flat impedance curve also makes the crossoverCrossover design incredibly easy, as you don't have to deal with difficult loads! More than that As audio technology improves beyond the imagination of the last generation, GRShere, to keep you updated! With a membrane thickness of 0.03 mm made of pure aluminum foiluse the GRS Hi-Res Neo ribbon tweeters the advantages of the latest materials and motor technology,to offer you a tweeter that reproduces up to 40 kHz faithfully!
Dayton Audio SPA-F Subwoofer Plate Amplifier Mounting Frame for SPA250DSP and SPA500DSP
The GRS 18PT-8 18” professional paper cone woofer will deliver high output bass response without breaking the bank. Packed with features like a 3” voice coil, inductance reducing copper cap, under spider venting, and gap vents; this driver is built for high performance, low distortion, and incredible reliability. Whether you need a drop-in replacement for a worn-out professional subwoofer or are working on a completely new design, the 18PT-8 is the perfect driver for budget builds. Key Features Lightweight ribbed paper cone allows high efficiency with minimal resonance 3” diameter voice coil on heat resistant Kapton former handles up to 350 watts RMS Great displacement capability is ideal for high output subwoofer designs Extensive venting keeps cool air flowing across the voice coil to minimize power compression Inductance lowering copper cap reduces distortion and extends high frequency response Spring-loaded push-button terminals makes wire connections quick and easy Foam front gasket ensures an airtight seal for rear mount installations Engineered for high output with powerful low frequency extension, the 18PT-8 18” professional woofer is ideal for use in large low-cost sound systems. Packed with features you would expect from much more expensive drivers, the 18PT-8 is built for low distortion and reliability even when pushed to its limit. The lightweight reinforced paper cone has excellent damping properties, minimizing unwanted resonances, and the ribbed surface controls cone breakup to ensure smooth response all the way up to 1,000 Hz. Driving the cone is a 3” diameter dual-layer voice coil that is wound on a heat resistant polyimide former to handle up to 350 watt RMS. Extensive venting through frame, pole piece, and magnetic gap cools the voice coil to prevent thermal runaway and lower power compression during long sessions at high power. With a copper cap on the pole piece keeping inductance under control, you can ensure that the 18PT-8 will provide low distortion throughout its useable bandwidth. Whether you need a drop-in replacement for a blown professional subwoofer, or are designing a new system, the 18PT-8 is the ideal choice if you want high impact low frequency response without spending a fortune.
GRS RT3.0-FP Silver Face Plate for RT3.0 Ribbon Tweeter
By attaching the GRS RT3.0-8 to the RT3.0-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Key FeaturesAluminum faceplate for the GRS RT3.0-8 tweeters Instantly improve the looks of any project Does not affect output when installed Tweeter not included Hochtöner nicht enthalten
GRS RT2.0-FP Silver Face Plate for RT2.0 Ribbon Tweeter
By attaching the GRS RT2.0-8 to the RT2.0-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Key FeaturesAluminum faceplate for the GRS RT2.0-8 tweeters Instantly improve the looks of any project Does not affect output when installed Tweeter not included Hochtöner nicht enthalten
GRS RT1.R-FP Silver Face Plate for RT1.R Ribbon Tweeter
By attaching the GRS RT1.R-8 to the RT1.R-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Durch die Befestigung des GRS RT1.R-8 an der RT1.R-FP Frontplatte können Sie den Montageprozess rationalisieren. Diese Frontplatte vereinfacht das komplexe Profil dieser Hochtöner und bietet gleichzeitig eine bündige Montage, wodurch Beugungseffekte gemildert werden und jedes Projekt einen ästhetisch ansprechenden Abschluss erhält!Wesentliche Merkmale Aluminium-Frontplatte für die GRS RT1.R-8 Hochtöner Verbessert sofort das Aussehen eines jeden Projekts Beeinträchtigt die Leistung nicht, wenn sie installiert ist Hochtöner nicht enthalten
GRS RT1.0-FP Silver Face Plate for RT1.0 Ribbon Tweeter
GRS RT1.0-FP Silver Face Plate for RT1.0 Ribbon TweeterBy attaching the GRS RT1.0-8 to the RT1.0-FP faceplate, you can streamline the mounting process. This faceplate simplifies the complex profile of these tweeters while offering a flush mounting ensuring diffraction effects are mitigated, as well as providing an aesthetically pleasing finish to any project!Key Features Aluminum faceplate for the GRS RT3.0-8 tweeters Instantly improve the looks of any project Does not affect output when installed Tweeter not included
GRS RT1.0-8 Hi-Res Neo Ribbon Tweeter 8 Ohm
GRS's premium "Hi-Res" ribbon tweeters with the latest in materials and motor technology easily reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system!Key Features2.5kHz to 40kHz frequency response for true "Hi-Res" detail Powerful neodymium magnets deliver high efficiency and incredible dynamics Remarkably thin ribbon diaphragm provides accurate transient detail High sensitivity for increased SPL Output Built-in grill protects the delicate ribbon from fingers and other foreign objects Optional silver faceplate available Hi-Res. High-Value. GRS has released a line of premium "Hi-Res" ribbon tweeters employing the latest in materials and motor technology> The GRS Hi-Res Ribbon Tweeters effortlessly reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system. This is achieved by employing incredibly light and thin diaphragms, high grade neodymium motor and attention to detail in the assembly process. The GRS Hi-Res Ribbon Tweeters are perfect for those looking for the "Hi-Res" detail in their loudspeaker system!Frequency Response & ImpedanceThe GRS Neo Ribbon Tweeters have an extended frequency response that reaches up to 40kHz, this allows the tweeter to provide better transient detail and less roll-off at 20kHz than you’d normally get with typical tweeters. The relatively flat impedance curve also makes crossover design incredibly simple, with no awkward loads to work around!Above and beyondAs audio technology improves beyond the imagination of the last generation, GRS is here to keep you up to spec! With a diaphragm thickness of 0.03mm made from pure aluminum foil, the GRS Hi-Res Neo Ribbon Tweeters take advantage of the latest in materials and motor technology to bring you a tweeter that plays faithfully up to 40kHz! Die GRS Hi-Res Bändchenhochtöner sind perfekt für alle, die auf der Suche nach dem "Hi-Res"-Detail in ihrem Lautsprechersystem sind! Frequenzgang & Impedanz Die GRS Neo-Bändchenhochtöner haben einen erweiterten Frequenzgang, der bis zu 40 kHz reicht. Dies ermöglicht dem Hochtöner eine bessere Detailwiedergabe im Einschwingverhalten und weniger Abschwächung bei 20 kHz als bei typischen Hochtönern. Die relativ flache Impedanzkurve macht auch das Design der Frequenzweiche unglaublich einfach, da man sich nicht mit unangenehmen Lasten herumschlagen muss! Mehr als das Da sich die Audiotechnologie über die Vorstellungskraft der letzten Generation hinaus verbessert, ist GRS hier, um Sie auf dem Laufenden zu halten! Mit einer Membranstärke von 0,03 mm aus reiner Aluminiumfolie nutzen die GRS Hi-Res Neo Bändchenhochtöner die Vorteile der neuesten Materialien und Motorentechnologie, um Ihnen einen Hochtöner zu bieten, der bis zu 40 kHz originalgetreu wiedergibt!
GRS RT1.R-8 Hi-Res Neo Ribbon Tweeter 8 Ohm
GRS's premium "Hi-Res" ribbon tweeters with the latest in materials and motor technology easily reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system!Key Features2.5kHz to 40kHz frequency response for true "Hi-Res" detail Powerful neodymium magnets deliver high efficiency and incredible dynamics Remarkably thin ribbon diaphragm provides accurate transient detail High sensitivity for increased SPL Output Built-in grill protects the delicate ribbon from fingers and other foreign objects Optional silver faceplate available Hi-Res. High-Value. GRS has released a line of premium "Hi-Res" ribbon tweeters employing the latest in materials and motor technology> The GRS Hi-Res Ribbon Tweeters effortlessly reach frequencies of 40kHz and beyond, adding incredible detail from your hi-fi system. This is achieved by employing incredibly light and thin diaphragms, high grade neodymium motor and attention to detail in the assembly process. The GRS Hi-Res Ribbon Tweeters are perfect for those looking for the "Hi-Res" detail in their loudspeaker system!Frequency Response & Impedance The GRS Neo Ribbon Tweeters have an extended frequency response that reaches up to 40kHz, this allows the tweeter to provide better transient detail and less roll-off at 20kHz than you’d normally get with typical tweeters. The relatively flat impedance curve also makes crossover design incredibly simple, with no awkward loads to work around! Above and beyondAs audio technology improves beyond the imagination of the last generation, GRS is here to keep you up to spec! With a diaphragm thickness of 0.03mm made from pure aluminum foil, the GRS Hi-Res Neo Ribbon Tweeters take advantage of the latest in materials and motor technology to bring you a tweeter that plays faithfully up to 40kHz! bei 20kHz, als man es von typischen Hochtönern gewohnt ist. Die relativ flache Impedanzkurve macht auch das Design der Frequenzweiche unglaublich einfach, ohne dass man sich mit schwierigen Lasten herumschlagen muss! Mehr als das Da sich die Audiotechnologie über die Vorstellungskraft der letzten Generation hinaus verbessert, ist GRS hier, um Sie auf dem Laufenden zu halten! Mit einer Membranstärke von 0,03 mm aus reiner Aluminiumfolie nutzen die GRS Hi-Res Neo Bändchenhochtöner die Vorteile der neuesten Materialien und Motorentechnologie, um Ihnen einen Hochtöner zu bieten, der bis zu 40 kHz originalgetreu wiedergibt!
GRS 15SSW-4HE
GRS 15SSW-4HE 15" Super-Subwoofer mit hoher Auslenkung 4 Ohm Der Flaggschiff-Tieftöner 15SSW-4HE 15" High Excursion Super-Subwoofer von GRS wurde entwickelt, um eine exzellente Tieftonerweiterung in einer Vielzahl von Designs zu erzeugen. Er eignet sich für geschlossene und belüftete Gehäuse und ist der ideale Ersatz oder das ideale Upgrade für Ihre vorhandenen Subwoofer mit verschlissenen oder durchgebrannten Treibern. Der 15SSW-4HE verfügt über eine umfangreiche Belüftung, eine doppelte Spinne, eine Gummisicke mit hoher Ausdehnung, eine Hochtemperatur-Schwingspule, ein niedriges Fs und 12,3 mm Auslenkung und ist für eine bemerkenswerte Basswiedergabe zu einem günstigen Preis ausgelegt.Wichtigste Merkmale Hohe Auslenkung und niedriges Fs für eine kraftvolle Tieftonwiedergabe Doppelte Spinnenaufhängung für hohe Auslenkung 2,5"-Schwingspule auf einem dicken Aluminiumträger für eine Leistung von bis zu 300 Watt RMS Belüftung unter der Spinne, durch das Polstück und im Magnetspalt für hervorragende Wärmeableitung Über 12 mm linearer Einweg-X-MAX Der verlängerte Rahmen und die gewölbte Rückplatte bieten reichlich Spielraum für hohe Auslenkungen Langlebige, verstärkte Papiermembran mit Gummisicke für zuverlässige und gleichbleibende Leistung Entwickelt für erweiterten Tieftonbereich und Flexibilität Der GRS 15SSW-4HE 15-Zoll-Hochhub-Subwoofer von GRS ist ein idealer Ersatztreiber für bestehende Subwoofersysteme oder eine ausgezeichnete Wahl für neue wirtschaftliche Designs. Der 15SSW-4HE ist in der Lage, sowohl in geschlossenen als auch in belüfteten Ausführungen eine kraftvolle Basswiedergabe zu erzeugen und eignet sich als Ersatz für die meisten vorhandenen 15"-Subwoofer.