%
Bold North Audio BWF-6503
€99.00*
€164.70*
(39.89% saved)
Key Features
Light weight, rigid carbon fiber cone with rubber surround
2.6 mm, Klippel verified minimum Xmax
Vented, square cast aluminum basket
1” voice coil, edge-wound copper on Kapton form
Wide frequency range, 60 to 12kHz
0.9 kg, (2.1 lb) net weight
This 6.5” premium woofer provides both value and performance. A custom fabricated woven carbon fiber cone allows for a rigid piston and fast transient response. A stylish yet sturdy round cast aluminum basket provides easy front mounting in an enclosure. The carefully designed aluminum phase plug eliminates the need for the additional mass of a dust cap and reduces lateral wave energy interference which causes unwanted peaks and dips in the frequency response.
Only 4 available
%
Bold North Audio BDT-2901
€127.80*
€142.00*
(10% saved)
29 MM NEO-CLASSICAL DOME TWEETER, DESIGNED AND BUILT IN THE USA.This tweeter was designed by transducer engineers with decades of experience and built by highly skilled manufacturing personnel. It is the only dome tweeter on the market designed and assembled in the USA and fully verified by Klippel. The BDT-2901 (78036) tweeter is the result of engineers' and audiophiles' desire for a precise 29mm dome tweeter with a low cross-over point. Experience crisp high-end frequencies with an overall smooth performance, free from the metallic ringing produced by titanium dome tweeters.
High-energy neodymium ring magnet for high sensitivity.
Copper pole cap for low inductance and extended high frequency response
Large rear chamber for low resonance and lower crossover point
29 mm Kurt Mueller silk dome cone
8 Ohm, 91 dB SPL
Designed and manufactured in the USA
Bold North Audio products are the most precise, engineered transducers on the market. Each design requires Klippel vibration analysis to verify key components for optimum audio performance. Although we rely heavily on objective science, we know that speakers must tell the musical truth above all else. Our engineers, musicians and recording studio veterans are the final judges of whether a design is worthy of the Bold North Audio brand.
All Bold North Audio products are assembled in Minnesota, with parts sourced from around the world to achieve the highest combination of performance, consistency and customer value.
%
Bold North Audio BMW-4001
€59.00*
€99.00*
(40.4% saved)
Key Features
Light weight, rigid carbon fiber cone with rubber surround
2.6 mm, Klippel verified minimum Xmax
Vented, square cast aluminum basket
1” voice coil, edge-wound copper on Kapton form
Wide frequency range, 60 to 12kHz
0.9 kg, (2.1 lb) net weight
This 4" Bass/mid-range is appropriate for a wide range of high-end audio systems, whether 2-way bookshelf speaker, a multi-driver floor standing speaker or a professional line array. A rigid, but light weight carbon fiber cone along with an edge wound copper voice coil, combine for excellent transient response and an extended and controlled top end roll-off. The frame is heavy duty, aluminum die cast with venting below the flat spider and through the center of the magnet structure to avoid air turbulence and noise. This is a premium, well-crafted speaker designed to bring music to life.
Only 8 available
%
Bold North Audio BWF-1001
€129.00*
€234.00*
(44.87% saved)
The BWF-1001 (82131), 10” premium subwoofer creates great low frequency output for professional and high-end audio applications. Reliability, high power handling and long throw is achieved with a 4-layer copper voice coil in a dual ferrite magnet design. The cone is a proprietary treated cone for both enhanced damping and water resistance. A rubber surround provides both high compliance and stability for the suspension. Connection is made via gold plated, spring type connectors. Included is a rubber mounting gasket which both conceals screws and seals the driver when front mounted. This gasket is removeable. This subwoofer a solid foundation for any sound system that needs top tier bass.
See model BWF-1002 (82132) for a similar driver with a Hemp fiber cone and durable foam surround.
13 mm linear excursion (BL)
Low 27 Hz resonant frequency
10” (272 mm) 12 spoke cast aluminum basket
150 watts, 5 ohms, 86 dB SPL
2”, four-layer copper voice coil, 5 ohm impedance
Dual ferrite magnet allowing for long throw
Fiber cone with a proprietary damping treat and NBR rubber edge
Bold North Audio products are the most accurate, engineered audio transducers available. Each design receives Klippel vibrational test analyses to verify the key parts of optimal audio performance. While we rely heavily on objective science to lead us, we understand that most of all speakers need to tell the musical truth. Our engineers, musicians, and recording studio veterans are the final judges of when a design is worthy of the Bold North Audio brand.
All Bold North Audio products are assembled in Minnesota, with parts sourced from around the world to produce the highest combination of performance, consistency, and customer value.