Faital Pro 6FE200-4

Picture similar to product

€55.00

Available, delivery time: 1-3 days

Product number: V11187

Manufacturer: Faital Pro

Weight: 2.2 kg

Delivery time: 1-3 days

Min. order quantity: 1

Faital Pro 6FE200-4

Nominal Specifications

Nominal Diameter	160 mm (6 in)
Overall Diameter	167.4 mm (6.59 in)
Bolt Circle Diameter	154 mm (6.06 in)
Baffle Cutout Diameter	144 mm (5.67 in)
Depth	77 mm (3.03 in)
Flange and Gasket Thickness	8 mm (0.31 in)
Net Weight	2 kg (4.4 lb)
Shipping Box (Single Carton Box)	190 x 185 x 103 mm (7.5 x 7.3 x 4.1 in)
Shipping Weight	2.2 kg (4.9 lb)

Technical Parameters

Nominal Impedance	4 Ohm
Minimum Impedance	3.6 Ohm
AES Power Handling (1)	130 W
Maximum Power Handling (2)	260 W
Sensitivity (1W/1m)	95 dB
Frequency Range	85÷6000 Hz
Voice Coil Diameter	37 mm (1.46 in)
Winding Material	Al
Former Material	Kapton
Winding Depth	11.9 mm (0.47 in)
Magnetic Gap Depth	8 mm (0.31 in)
Flux Density	1 T
Magnet	Ferrite Ring
Basket Material	Steel
Demodulation	No
Cone Surround (3)	M-Roll
NET Air Volume filled by Loudspeaker	0.45 dm^3 (0.016 ft^3)
Spider Profile	1x constant height waves

Thiele and small parameters

Fs	120 Hz
Re	3 Ohm
Qes	0.45
Qms	6.2
Qts	0.42
Vas	4.3 dm^3 (0.15 ft^3)
Sd	131 cm^2 (20.3 in^2)
Xmax (4)	4.62 mm
Xdamage (5)	10.4 mm
Mms	9.7 g
Bl	7 N/A
Le	0.20 mH
Mmd	8.0 g
Cms	0.18 mm/N
Rms	1.2 kg/s
Eta Zero	1.61 %
EBP	267 Hz

PART NUMBER (P/N)

Faston Terminals - 4 Ohm Version

01604055

Notes:

(1) 2 Hours Test According to AES 2-1984 Rev. 2003

(2) Maximum power is defined as 3dB greater than nominal power.

(3) Treated Polycotton

(4) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)

(5) Maximum excursion before permanent damage

Properties

Eff. Membranfläche (Sd):	131cm²
Effektive Bewegte Masse (Mms):	8,0g
Elektrische Güte (Qes):	0,45
Gesamtgüte (Qts):	0,42
Gleichstromwiderstand (Re):	3Ω
Impedanz (Z):	4 Ohm
Kennschalldruck:	95dB
Kraftfaktor (BL):	7 N/A
Lineare Auslenkung (Xmax):	4,62mm
Mechanische Güte (Qms):	6,2
Nachgiebigkeit (Cms):	1,2kg/s
Resonanzfrequenz (fs):	120Hz
Schwingspulenind. (Le):	0,20mH
Äquivalentvolumen (Vas):	4,3dm³

Data according to manufacturer. Errors and changes reserved.

Accessory Items

Cinema Signature 8 Lautsprecherbausatz

Cinema Signature 8 Speaker KitCinema Signature 8 Test in HiFiTest and Klang+Ton 6/2022Link2-Way Shelf/OnWall/InWall Assembly: 20cm (8inch) Coaxial; Frequency crossover components Mundorf Hi-Quality: Properties: Ziel war es, ausgezeichnete Dynamik für herkömmliche AVRs (Audio Video Receiver)for achieving high-quality home theater applications. Thus, the requirements for this kit were clear:Level stability, good efficiency, 8Ohm. These specifications had to be met without compromising on a Hi-Ficonformal tuning and an acceptable stand-alone capability (with 60Hz -f3 near wall or wall installation) to forego.In doing so, we have also achieved a constant radiation pattern up to 60 degrees and a very low installation depth.The good efficiency and 8-ohm impedance allow for sound pressure levels as they should be in the cinema range, even with smaller AV receivers.Excellent as Main (L/R) (Satellite) or as a Center. With an addition in the low frequency range, e.g., the CSS SDX12is a powerful home theater realized in no time. Scope of delivery: Screws Chassis Terminal Bass reflex tube Cable (Interior) Insulation fleece Crossover components (Loose) In the selected quantity, it refers to pieces, not pairs.

€396.95