CSS Audio SDX12
The SDX-12 is one of the most formidable subwoofer drivers of our time, and it offers highly remarkable low bass qualities. Measured against this, its price of 440 Euros can be described as extremely reasonable. For the ultimate low bass kick, this is exactly the right transducer.
CSS Audio SDX10
CSS Audio SDX10Exactly like the SDX12, the SDX10 is also powered by a patented XBL² motor, making it part ofthe most precise 25cm (10 inch) long-throw woofers available. With the XBL² motor, the SDX10,exactly like its bigger brother, with extremely low distortion values and thus enables a rarebelonged to clear and nuanced bass reproduction. An Xmax of 36 mm (peak-to-peak) enables above thathinaus maximum dynamic capability. Features Carbon fiber reinforced paper diaphragm for high stiffness and good internal damping properties Semi-progressive centering for better linearity Butyl Rubber Surround Aluminum and copper short-circuit rings for low distortion values and minimal inductance rise Die casting basket High power, XBL² Motor 6-layer 60.6mm voice coil diameter 750W RMS, 1500W Peak thermal load capacity Parameter Fs: 26.0Hz SPL: 89 dB @ 2.83V/1M Nom Imp 4 ohm Re: 3.5 Ohms Mms 112 g BL: 11.8 NA Vas: 53 Liters Qes: 0.47 Qms: 4.0 Qts: 0.42 Le: 1.42 mH Xmax: 18.4 mm Sd: 330 cm²
CSS Audio LD25X
The legendary LD25X has returned! Finding the patented XBL^2 in a tweeter is rare due to the challenging quality control that is required to ensure the tweeter functions as designed but offers unique benefits over other designs. The extremely flat and broad BL curve provides a larger and stronger magnetic field for the voicecoil to operate within. This leads to low levels of inter-modulation distortion by ensuring the voicecoil is always operating in the linear range even at higher powers and lower frequencies. We didn't stop there with this new iteration though. On top of the XBL^2 motor we added an additional copper cap to further reduce distortion and increase top end frequency extension. All told, you get incredibly detailed and dynamic sound reproduction in a small and elegant package.
CSS Audio LD22
CSS Audio LD22The CSS LD22 high-performance tweeter uniquely fits between the usual standard tweeters with19mm (3/4 ") and 25 mm (1") voice coils. A 22mm aluminum voice coil with copper cladding anda wide suspension ensures a low Fs and thus supports a deep coupling to theCrossover. A rear chamber and an external neodymium ring magnet ensure very lowCompression distortions than would be possible with conventional designs. Carefully selectedMaterials and the coated fabric dome enable reproduction up to 40 kHz. Test Conclusion Hobby HiFi 1/2020; CSS provides with the LD22 an excellent dome tweeter, usable from 2000 Hertz and thanks toNeodymium drive pleasantly compactly built. Parameter Nominal size: 22 mm Fs: 870 Hz SPL 89 dB @ 2.83V/1M Nom Imp: 4 ohm Re: 3.6 ohm Mms: 0.27 g Bxl: 1.7 Cms: 0.15 mm/N Vas: 7.7 ml Rms: 0.97 Ns/m Qms: 1.4 Qes: 1.69 Qts: 0.77 Voice coil inside diameter: 22 mm Voice coil winding height: 1.6 mm Air gap height: 2.5 mm Le: 40 μH Xmax: ±0.45 mm Sd: 6.1 cm² Empfohlener Frequenzbereich: 2-30 kHz
CSS Audio LDW7
The LDW7 is an excellent, small woofer-midrange that easily competes with drivers much more expensive. Low distortion provides very detailed music reproduction. Favorable specifications allow deep bass in a modest enclosure. Large, linear excursion allows for uncompressed dynamics.HighlightsSymmetrical drive structure for optimal drive force distributionBuilt-in aluminum field stabilization ring reduces harmonic distortionCopper pole cap reduces voice coil inductance and minimizes deviations of inductance relative to voice coil positionNew paper-fiberglass diaphragm for improved stabilityVented voice coil former reduces distortion and compressionBlack fiberglass voice coil former reduces mechanical losses1½" large voice coil allows for better control and power handlingLow-loss suspension (high Qm) for better reproduction of detail and dynamicsConex centering provides better durability under extreme conditionsVented die-cast aluminum basket reduces airflow velocities and flow noiseGold-plated connectors ensure long-term interference-free connection80W RMS, 200W peak
CSS Audio APR10
CSS Audio APR10Die Passivradiatoren von CSS verfügen über ein zum Patent angemeldetes Frontmontagesystem für dasadditional weight that allows for easy tuning adjustment without the passive radiatorfrom the housing must be removed, and with sufficient deflection to work with our high-performance-Subwoofers to keep up with.