Dayton Audio UM12-22 12" Ultimax
€329.95
Dayton Audio UM12-22 12" Ultimax DVC Subwoofer 2 ohms Per Coil
Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design.
Key Features
- Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber
- Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area
- 600 watts RMS power handling
- Copper shorting rings and cap reduce distortion due to inductance variations
- Dual 2 ohm, 2-layer copper voice coils
- Large vented pole piece and under-spider venting
- Black anodized aluminum former and black pole improves heat dissipation
Dayton Audio UM12-22 12" Ultimax DVC Subwoofer 2 ohms Per Coil
If you want outrageous amounts of bass, you gotta move some air
The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass.
The versatility you need for mobile, home, or pro subwoofer excellence
Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility.
Built to produce massive low frequency output and keep on doing it
To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils.
Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation.
A strong motor takes you to wherever you want to be
A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures.
| Artikel-Nr.: | 295-512 |
|---|---|
| Außenmaß: | 314,5mm |
| Bohrlochanzahl: | 8 |
| EAN: | 844632099250 |
| Eff. Membranfläche (Sd): | 490,9cm² |
| Effektive Bewegte Masse (Mms): | 206g |
| Einbautiefe: | 158 mm |
| Einbauöffnung: | 284,5 mm |
| Einheit: | Stück |
| Elektrische Güte (Qes): | 1,05 |
| Frequenzbereich: | 20 bis 1,000Hz |
| Gesamtgüte (Qts): | 0,77 |
| Gewicht: | 22.35 kg |
| Gleichstromwiderstand (Re): | 3,7Ω |
| Größe: | 12 " |
| Impedanz (Z): | 2x2 Ohm |
| Kennschalldruck: | 86,3dB |
| Korbmaterial: | Aluminium Guss |
| Kraftfaktor (BL): | 12Tm |
| Lineare Auslenkung (Xmax): | 19mm |
| Magnet: | Ferrit |
| Marke: | Dayton Audio |
| Mechanische Güte (Qms): | 2,9 |
| Membranmaterial: | Nomex / Glasfaser |
| Modell: | UM12-22 |
| Nachgiebigkeit (Cms): | 0,12mm/N |
| Nennbelastbarkeit: | 600 Watt |
| Power Handling (MAX): | 1000 Watts |
| Resonanzfrequenz (fs): | 31,8Hz |
| Schwingspulendraht Material: | Copper |
| Schwingspulendurchmesser: | 63,5 mm |
| Schwingspulenind. (Le): | 0,78mH |
| Schwingspulenkörper: | Aluminium |
| Schwingspulenmaterial: | Kupfer |
| Sensitivität: | 86,7dB 2,83V/1m |
| Sickenmaterial: | Gummi |
| Äquivalentvolumen (Vas): | 41,1 ltr. |
Similar Items
Dayton Audio UMII12-22 Ultimax IIWe present the UMII12-22 Ultimax II 12" Carbon Fiber Cone Subwoofer from Dayton Audio. Building onon the success of their predecessor, these subwoofers have been carefully developed to meet all expectations ofoutperform. With improved excursion capability, lower distortion, higher power handling,better efficiency and increased performance elevate the new Ultimax II generation subwoofers and yourAudio experience with new low-frequency experiences. Immerse yourself in rich, powerful bass that will take you to theMark will be shaken. Dayton Audio continues to define the boundaries of the UMII12-22 subwoofer.Excellence new. Main features A large aluminum short-circuit cap helps to linearlyhold to guarantee minimal distortions. The rigid yet lightweight woven carbon fiberMembrane provides a fast, detailed, and accurate response. With ±22 mm xmax, you can apowerful and deep bass response that elevates your audio experience to the next level.Equipped with a 4-layer 3" flat wound voice coil that can handle up to 800 watts RMScan. The basket and drive are comprehensively ventilated, allowing for efficient heat dissipation for aconsistent and reliable operation ensured while simultaneously performance compressionminimized. Dual spiders maintain membrane linearity even at extremely high excursion levelsand always provide optimal audio performance. Optimized for compact, closed enclosures, but inder Lage, in Bassreflex Designs eine außergewöhnliche Niederfrequenzerweiterung zu erzielen – offersYou the freedom to create the perfect audio setup.